Re: [PATCH 4/5] serial: convert early_uart to earlycon for 8250

[Andrew Morton <akpm@linux-foundation.org>]

On Tue, 29 May 2007 18:43:59 -0700
Yinghai Lu <Yinghai.Lu@Sun.COM> wrote:

> [PATCH 4/5] serial: convert early_uart to earlycon for 8250
> 
> Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
> include/asm-x86_64/serial.h. the serial8250_ports need to be probed late
> in serial initializing stage. the console_init=>serial8250_console_init=>
> register_console=>serial8250_console_setup will return -ENDEV, and console
> ttyS0 can not be enabled at that time.
> need to wait till uart_add_one_port in drivers/serial/serial_core.c to call
> register_console to get console ttyS0. that is too late.
> 
> Make early_uart to use early_param, so uart console can be used earlier.
> Make it to be bootconsole with CON_BOOT flag, so can use console handover
> feature. and it will switch to corresponding normal serial console
> automatically.
> 
> new command line will be:
> 	console=uart8250,io,0x3f8,9600n8
> 	console=uart8250,mmio,0xff5e0000,115200n8
> or
> 	earlycon=uart8250,io,0x3f8,9600n8
> 	earlycon=uart8250,mmio,0xff5e0000,115200n8
> 
> it will print in very early stage:
> 	Early serial console at I/O port 0x3f8 (options '9600n8')
> 	console [uart0] enabled
> later for console it will print:
> 	console handover: boot [uart0] -> real [ttyS0]
> 
> 
>  Documentation/kernel-parameters.txt |   11 +++
>  arch/ia64/kernel/setup.c            |    4 -
>  drivers/serial/8250.c               |   28 ++-------
>  drivers/serial/8250_early.c         |  104 ++++++++++++++----------------------
>  drivers/serial/Kconfig              |   10 +++
>  include/asm-i386/fixmap.h           |    2 
>  include/asm-i386/io.h               |   13 ++++
>  include/asm-ia64/io.h               |    4 +
>  include/asm-x86_64/fixmap.h         |    4 +
>  include/asm-x86_64/io.h             |   13 ++++
>  include/linux/console.h             |    2 
>  include/linux/serial.h              |    6 --
>  include/linux/serial_8250.h         |    3 +
>  init/main.c                         |    5 +
>  kernel/printk.c                     |   22 +++++++
>  15 files changed, 133 insertions(+), 98 deletions(-)

This is a lot of tricky stuff in areas which I'm not very familar with. 
Need help, am not getting it.

> @@ -143,12 +140,7 @@ static int __init parse_options(struct early_uart_device *device, char *options)
>  	if (!strncmp(options, "mmio,", 5)) {
>  		port->iotype = UPIO_MEM;
>  		port->mapbase = simple_strtoul(options + 5, &options, 0);
> -		port->membase = ioremap(port->mapbase, mapsize);
> -		if (!port->membase) {
> -			printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
> -				__FUNCTION__, port->mapbase);
> -			return -ENOMEM;
> -		}
> +		port->membase = fix_ioremap(FIX_EARLYCON_MEM_BASE, port->mapbase);

A number of useful-looking warnigns such as the above got removed.  How come?

>  		mmio = 1;
>  	} else if (!strncmp(options, "io,", 3)) {
>  		port->iotype = UPIO_PORT;
> @@ -175,9 +167,16 @@ static int __init parse_options(struct early_uart_device *device, char *options)
>  	return 0;
>  }
>  
> -static int __init early_uart_setup(struct console *console, char *options)
> +static struct console early_serial8250_console __initdata = {
> +	.name	= "uart",
> +	.write	= early_serial8250_write,
> +	.flags	= CON_PRINTBUFFER,

Should this have CON_BOOT set as well?

See
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc7/2.6.21-rc7-mm2/broken-out/fixes-and-cleanups-for-earlyprintk-aka-boot-console.patch,
which is now in mainline.

> +	.index	= -1,
> +};
> +
> +static int __init early_serial8250_setup(char *options)
>  {
> -	struct early_uart_device *device = &early_device;
> +	struct early_serial8250_device *device = &early_device;
>  	int err;
>  
>  	if (device->port.membase || device->port.iobase)
> @@ -190,61 +189,40 @@ static int __init early_uart_setup(struct console *console, char *options)
>  	return 0;
>  }
>  
> -static struct console early_uart_console __initdata = {
> -	.name	= "uart",
> -	.write	= early_uart_write,
> -	.setup	= early_uart_setup,
> -	.flags	= CON_PRINTBUFFER,
> -	.index	= -1,
> -};

hm, that didn't have CON_BOOT.

> +static inline void __iomem * fix_ioremap (unsigned idx, unsigned long phys)

I don't suppose it'd help much if I were to complain about the coding style
(no space after the * or after the function name, please).

> +{
> +	void __iomem * vaddr;
> +	set_fixmap_nocache(idx, phys & PAGE_MASK);
> +	vaddr = (void __iomem *)__fix_to_virt(idx);
> +	vaddr += phys & ~PAGE_MASK;
> +
> +	return vaddr;
> +}

Probably this was a bit too large for inlining.

>  /* Use early IO mappings for DMI because it's initialized early */
>  #define dmi_ioremap bt_ioremap
>  #define dmi_iounmap bt_iounmap
> diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
> index eb17a86..e29eaf8 100644
> --- a/include/asm-ia64/io.h
> +++ b/include/asm-ia64/io.h
> @@ -423,6 +423,10 @@ extern void __iomem * ioremap(unsigned long offset, unsigned long size);
>  extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
>  extern void iounmap (volatile void __iomem *addr);
>  
> +/* for console=uart8250,mmio,0xffe5000,9600n8 */
> +#define FIX_EARLYCON_MEM_BASE 1
> +#define fix_ioremap(idx, phys) ioremap(phys, 64)
> +
>  /* Use normal IO mappings for DMI */
>  #define dmi_ioremap ioremap
>  #define dmi_iounmap(x,l) iounmap(x)

So we touch ia64 as well?

>  
> +int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
> +{
> +	struct console_cmdline *c;
> +	int i;
> +
> +	for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++)
> +		if (strcmp(console_cmdline[i].name, name) == 0 &&
> +			  console_cmdline[i].index == idx) {
> +				c = &console_cmdline[i];
> +				memcpy(c->name, name_new, sizeof(c->name));
> +				c->name[sizeof(c->name) - 1] = 0;
> +				c->options = options;
> +				c->index = idx_new;
> +				return i;
> +		}
> +	/* not found */
> +	return -1;
> +}

Shouldn't this be __init?

serial8250_find_port_for_earlycon() had its __init removed.  Why?


This patch conflicts with David's
serial-use-resource_size_t-for-port-io-addresses.patch in minor ways, but
there may be functional conflicts as well.  David's patch seems to be a bit
stuck, so I'll drop it and I'll merge these instead.  But I don't know what
I'm doing.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/