That output looked nasty, attaching entries from syslog.
Justin.
On Wed, 30 May 2007, Justin Piszcz wrote:
Yes, you are correct, the netconsole output from another machine is shown
below. If we can access the memory directly, why is it so slow? :( Am I the
first person to try using 8 gigabytes of RAM on the 965 chipset?
On Wed, 30 May 2007, Robert Hancock wrote:
Justin Piszcz wrote:
Kernel dmesg attached from 8GB bootup.
It looks like part of the start of the output was truncated..
Robert, how come the option is not applicable in 64-bit mode? If I want to
use all 8GB of memory I need to run a 32-bit kernel?
Justin.
Highmem and PAE (which are essentially what the 4GB/64GB memory options
control) are not needed in 64-bit mode, since we can access the entire
64-bit address space directly.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
Here is the _FULL_ dmesg! Thanks netconsole!
May 29 17:39:11 p34 [ 0.000000] Linux version 2.6.21.3
([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007 May 29 17:39:11 p34 [
0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902
[email protected]/eth0,[email protected]/00:50:8D:ED:3C:E7
nmi_watchdog=1 May 29 17:39:11 p34 [ 0.000000] BIOS-provided physical RAM
map: May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000000000 -
000000000008f000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820:
000000000008f000 - 00000000000a0000 (reserved) May 29 17:39:11 p34 [
0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 29
17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf58f000
(usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf58f000 -
00000000cf59c000 (reserved) May 29 17:39:11 p34 [ 0.000000] BIOS-e820:
00000000cf59c000 - 00000000cf653000 (usable) May 29 17:39:11 p34 [
0.000000] BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS) May 29
17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000
(ACPI data) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a8000 -
00000000cf6ef000 (ACPI NVS) May 29 17:39:11 p34 [ 0.000000] BIOS-e820:
00000000cf6ef000 - 00000000cf6f1000 (ACPI data) May 29 17:39:11 p34 [
0.000000] BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) May 29
17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000
(ACPI data) May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6ff000 -
00000000cf700000 (usable) May 29 17:39:11 p34 [ 0.000000] BIOS-e820:
00000000cf700000 - 00000000d0000000 (reserved) May 29 17:39:11 p34 [
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) May 29
17:39:11 p34 [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000
(usable) May 29 17:39:11 p34 [ 0.000000] end_pfn_map = 2277376 May 29
17:39:11 p34 [ 0.000000] DMI 2.4 present. May 29 17:39:11 p34 [
0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) May 29 17:39:11 p34 [
0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL DG965WH 64C
1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: FACP CF6FC000, 0074 (r1
INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000]
ACPI: DSDT CF6F7000, 40E9 (r1 INTEL DG965WH 64C MSFT 1000013) May 29
17:39:11 p34 [ 0.000000] ACPI: FACS CF6A8000, 0040 May 29 17:39:11 p34 [
0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965WH 64C MSFT
1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: WDDT CF6F5000, 0040 (r1
INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000]
ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965WH 64C MSFT 1000013) May 29
17:39:11 p34 [ 0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965WH
64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: HPET CF6F2000,
0038 (r1 INTEL DG965WH 64C MSFT 1000013) May 29 17:39:11 p34 [
0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL CpuPm 64C MSFT
1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6EF000, 0175 (r1
INTEL Cpu0Ist 64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000]
ACPI: SSDT CF6A7000, 0175 (r1 INTEL Cpu1Ist 64C MSFT 1000013) May 29
17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL Cpu2Ist
64C MSFT 1000013) May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A5000,
0175 (r1 INTEL Cpu3Ist 64C MSFT 1000013) May 29 17:39:11 p34 [
0.000000] Zone PFN ranges: May 29 17:39:11 p34 [ 0.000000] DMA
0 -> 4096 May 29 17:39:11 p34 [ 0.000000] DMA32 4096 ->
1048576 May 29 17:39:11 p34 [ 0.000000] Normal 1048576 -> 2277376
May 29 17:39:11 p34 [ 0.000000] early_node_map[6] active PFN ranges May 29
17:39:11 p34 [ 0.000000] 0: 0 -> 143 May 29 17:39:11 p34 [
0.000000] 0: 256 -> 849295 May 29 17:39:11 p34 [ 0.000000]
0: 849308 -> 849491 May 29 17:39:11 p34 [ 0.000000] 0: 849649 ->
849650 May 29 17:39:11 p34 [ 0.000000] 0: 849663 -> 849664 May 29
17:39:11 p34 [ 0.000000] 0: 1048576 -> 2277376 May 29 17:39:11 p34 [
0.000000] ACPI: PM-Timer IO Port: 0x408 May 29 17:39:11 p34 [ 0.000000]
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 29 17:39:11 p34 [
0.000000] Processor #0 (Bootup-CPU) May 29 17:39:11 p34 [ 0.000000] ACPI:
LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) May 29 17:39:11 p34 [
0.000000] Processor #2 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled) May 29 17:39:11 p34 [ 0.000000]
Processor #1 May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x03] enabled) May 29 17:39:11 p34 [ 0.000000] Processor #3 May
29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl
lint[0x1]) May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02]
dfl dfl lint[0x1]) May 29 17:39:11 p34 [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0]) May 29 17:39:11 p34 [ 0.000000]
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 May 29 17:39:11 p34 [
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 29
17:39:11 p34 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
high level) May 29 17:39:11 p34 [ 0.000000] Setting APIC routing to flat
May 29 17:39:11 p34 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
May 29 17:39:11 p34 [ 0.000000] Using ACPI (MADT) for SMP configuration
information May 29 17:39:11 p34 [ 0.000000] Nosave address range:
000000000008f000 - 00000000000a0000 May 29 17:39:11 p34 [ 0.000000] Nosave
address range: 00000000000a0000 - 00000000000e0000 May 29 17:39:11 p34 [
0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 May 29
17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf58f000 -
00000000cf59c000 May 29 17:39:11 p34 [ 0.000000] Nosave address range:
00000000cf653000 - 00000000cf6a5000 May 29 17:39:11 p34 [ 0.000000] Nosave
address range: 00000000cf6a5000 - 00000000cf6a8000 May 29 17:39:11 p34 [
0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000 May 29
17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6ef000 -
00000000cf6f1000 May 29 17:39:11 p34 [ 0.000000] Nosave address range:
00000000cf6f2000 - 00000000cf6ff000 May 29 17:39:11 p34 [ 0.000000] Nosave
address range: 00000000cf700000 - 00000000d0000000 May 29 17:39:11 p34 [
0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000 May 29
17:39:11 p34 [ 0.000000] Nosave address range: 00000000fff00000 -
0000000100000000 May 29 17:39:11 p34 [ 0.000000] Allocating PCI resources
starting at d4000000 (gap: d0000000:2ff00000) May 29 17:39:11 p34 [
0.000000] PERCPU: Allocating 24512 bytes of per cpu data May 29 17:39:11 p34
[ 0.000000] Built 1 zonelists. Total pages: 2045692 May 29 17:39:11 p34 [
0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902
[email protected]/eth0,[email protected]/00:50:8D:ED:3C:E7
nmi_watchdog=1 May 29 17:39:11 p34 [ 0.000000] netconsole: local port 4444
May 29 17:39:11 p34 [ 0.000000] netconsole: local IP 192.168.168.253 May
29 17:39:11 p34 [ 0.000000] netconsole: interface eth0 May 29 17:39:11 p34
[ 0.000000] netconsole: remote port 514 May 29 17:39:11 p34 [ 0.000000]
netconsole: remote IP 192.168.168.254 May 29 17:39:11 p34 [ 0.000000]
netconsole: remote ethernet address 00:50:8d:ed:3c:e7 May 29 17:39:11 p34 [
0.000000] Initializing CPU#0 May 29 17:39:11 p34 [ 0.000000] PID hash
table entries: 4096 (order: 12, 32768 bytes) May 29 17:39:11 p34 [
48.249507] time.c: Detected 2397.605 MHz processor. May 29 17:39:11 p34 [
48.250572] Console: colour VGA+ 80x25 May 29 17:39:11 p34 [ 48.258651]
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) May 29
17:39:11 p34 [ 48.264855] Inode-cache hash table entries: 524288 (order:
10, 4194304 bytes) May 29 17:39:11 p34 [ 48.265963] Checking aperture...
May 29 17:39:11 p34 [ 48.266011] PCI-DMA: Using software bounce buffering
for IO (SWIOTLB) May 29 17:39:11 p34 [ 48.302233] Placing software IO TLB
between 0x95f6000 - 0xd5f6000 May 29 17:39:11 p34 [ 48.374061] Memory:
8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data,
220k init) May 29 17:39:11 p34 [ 48.434756] Calibrating delay using timer
specific routine.. 4797.72 BogoMIPS (lpj=2398863) May 29 17:39:11 p34 [
48.435408] Mount-cache hash table entries: 256 May 29 17:39:11 p34 [
48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K May 29 17:39:11 p34 [
48.436307] CPU: L2 cache: 4096K May 29 17:39:11 p34 [ 48.436347] using
mwait in idle threads. May 29 17:39:11 p34 [ 48.436389] CPU: Physical
Processor ID: 0 May 29 17:39:11 p34 [ 48.436430] CPU: Processor Core ID: 0
May 29 17:39:11 p34 [ 48.436474] CPU0: Thermal monitoring enabled (TM2) May
29 17:39:11 p34 [ 48.436526] Freeing SMP alternatives: 36k freed May 29
17:39:11 p34 [ 48.436584] ACPI: Core revision 20070126 May 29 17:39:11 p34
[ 48.485666] activating NMI Watchdog ... done. May 29 17:39:11 p34 [
48.485786] Using local APIC timer interrupts. May 29 17:39:11 p34 [
48.527564] result 16650037 May 29 17:39:11 p34 [ 48.527642] Detected 16.650
MHz APIC timer. May 29 17:39:11 p34 [ 48.529312] Booting processor 1/4 APIC
0x2 May 29 17:39:11 p34 [ 48.539943] Initializing CPU#1 May 29 17:39:11 p34
[ 48.600727] Calibrating delay using timer specific routine.. 4795.07
BogoMIPS (lpj=2397539) May 29 17:39:11 p34 [ 48.600785] CPU: L1 I cache:
32K, L1 D cache: 32K May 29 17:39:11 p34 [ 48.600822] CPU: L2 cache: 4096K
May 29 17:39:11 p34 [ 48.600852] CPU: Physical Processor ID: 0 May 29
17:39:11 p34 [ 48.600879] CPU: Processor Core ID: 2 May 29 17:39:11 p34 [
48.600914] CPU1: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [
48.601348] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29
17:39:11 p34 [ 48.601451] checking TSC synchronization [CPU#0 -> CPU#1]:
passed. May 29 17:39:11 p34 [ 48.623998] Booting processor 2/4 APIC 0x1 May
29 17:39:11 p34 [ 48.635015] Initializing CPU#2 May 29 17:39:11 p34 [
48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS
(lpj=2398315) May 29 17:39:11 p34 [ 48.694791] CPU: L1 I cache: 32K, L1 D
cache: 32K May 29 17:39:11 p34 [ 48.694829] CPU: L2 cache: 4096K May 29
17:39:11 p34 [ 48.694861] CPU: Physical Processor ID: 0 May 29 17:39:11 p34
[ 48.694891] CPU: Processor Core ID: 1 May 29 17:39:11 p34 [ 48.694928]
CPU2: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.695368]
Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29 17:39:11
p34 [ 48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed. May
29 17:39:11 p34 [ 48.717915] Booting processor 3/4 APIC 0x3 May 29 17:39:11
p34 [ 48.728547] Initializing CPU#3 May 29 17:39:11 p34 [ 48.788686]
Calibrating delay using timer specific routine.. 4795.46 BogoMIPS
(lpj=2397730) May 29 17:39:11 p34 [ 48.788750] CPU: L1 I cache: 32K, L1 D
cache: 32K May 29 17:39:11 p34 [ 48.788787] CPU: L2 cache: 4096K May 29
17:39:11 p34 [ 48.788817] CPU: Physical Processor ID: 0 May 29 17:39:11 p34
[ 48.788846] CPU: Processor Core ID: 3 May 29 17:39:11 p34 [ 48.788882]
CPU3: Thermal monitoring enabled (TM2) May 29 17:39:11 p34 [ 48.789318]
Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 May 29 17:39:11
p34 [ 48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed. May
29 17:39:11 p34 [ 48.810753] Brought up 4 CPUs May 29 17:39:11 p34 [
48.810941] testing NMI watchdog ... OK. May 29 17:39:11 p34 [ 49.178287]
migration_cost=156,193 May 29 17:39:11 p34 [ 49.182074] NET: Registered
protocol family 16 May 29 17:39:11 p34 [ 49.183506] ACPI: bus type pci
registered May 29 17:39:11 p34 [ 49.183670] PCI: BIOS Bug: MCFG area at
f0000000 is not E820-reserved May 29 17:39:11 p34 [ 49.183764] PCI: Not
using MMCONFIG. May 29 17:39:11 p34 [ 49.183847] PCI: Using configuration
type 1 May 29 17:39:11 p34 [ 49.324928] ACPI: Interpreter enabled May 29
17:39:11 p34 [ 49.325010] ACPI: Using IOAPIC for interrupt routing May 29
17:39:11 p34 [ 49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00) May 29
17:39:11 p34 [ 49.523873] PCI quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO May 29 17:39:11 p34 [ 49.523974] PCI quirk: region 0500-053f
claimed by ICH6 GPIO May 29 17:39:11 p34 [ 49.534492] PCI: Transparent
bridge - 0000:00:1e.0 May 29 17:39:11 p34 [ 49.792346] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.796475]
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11
p34 [ 49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
May 29 17:39:11 p34 [ 49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4
5 7 9 10 *11 12) May 29 17:39:11 p34 [ 49.808781] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 5 7 *9 10 11 12) May 29 17:39:11 p34 [ 49.812812] ACPI:
PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) May 29 17:39:11 p34 [
49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) May 29
17:39:11 p34 [ 49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9
10 *11 12) May 29 17:39:11 p34 [ 49.824280] Linux Plug and Play Support
v0.97 (c) Adam Belay May 29 17:39:11 p34 [ 49.824569] pnp: PnP ACPI init
May 29 17:39:11 p34 [ 49.923406] pnp: PnP ACPI: found 12 devices May 29
17:39:11 p34 [ 49.927655] SCSI subsystem initialized May 29 17:39:11 p34 [
49.935480] usbcore: registered new interface driver usbfs May 29 17:39:11 p34
[ 49.936497] usbcore: registered new interface driver hub May 29 17:39:11
p34 [ 49.939469] usbcore: registered new device driver usb May 29 17:39:11
p34 [ 49.942750] PCI: Using ACPI for IRQ routing May 29 17:39:11 p34 [
49.942851] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report May 29 17:39:11 p34 [ 49.944223] PCI-GART: No AMD northbridge
found. May 29 17:39:11 p34 [ 49.944929] hpet0: at MMIO 0xfed00000, IRQs 2,
8, 0 May 29 17:39:11 p34 [ 49.945145] hpet0: 3 64-bit timers, 14318180 Hz
May 29 17:39:11 p34 [ 49.946417] Time: tsc clocksource has been installed.
May 29 17:39:11 p34 [ 49.947517] pnp: 00:01: iomem range
0xf0000000-0xf7ffffff has been reserved May 29 17:39:11 p34 [ 49.947640]
pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved May 29
17:39:11 p34 [ 49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has
been reserved May 29 17:39:11 p34 [ 49.947943] pnp: 00:01: iomem range
0xfed18000-0xfed18fff has been reserved May 29 17:39:11 p34 [ 49.948125]
pnp: 00:06: ioport range 0x500-0x53f has been reserved May 29 17:39:11 p34 [
49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved May 29
17:39:11 p34 [ 49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been
reserved May 29 17:39:11 p34 [ 49.961379] ACPI: PCI Interrupt
0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 May 29 17:39:11 p34 [
50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[e0084000-e00847ff] Max Packet=[2048] IR/IT contexts=[4/8] May 29
17:39:11 p34 [ 50.016694] PCI: Ignore bogus resource 6 [0:0] of
0000:00:02.0 May 29 17:39:11 p34 [ 50.017108] PCI: Bridge: 0000:00:1c.0 May
29 17:39:11 p34 [ 50.017203] IO window: disabled. May 29 17:39:11 p34 [
50.017295] MEM window: e0700000-e07fffff May 29 17:39:11 p34 [ 50.017381]
PREFETCH window: disabled. May 29 17:39:11 p34 [ 50.017507] PCI: Bridge:
0000:00:1c.1 May 29 17:39:11 p34 [ 50.017598] IO window: 5000-5fff May 29
17:39:11 p34 [ 50.017689] MEM window: e0400000-e04fffff May 29 17:39:11
p34 [ 50.017776] PREFETCH window: disabled. May 29 17:39:11 p34 [
50.017882] PCI: Bridge: 0000:00:1c.2 May 29 17:39:11 p34 [ 50.017966] IO
window: 4000-4fff May 29 17:39:11 p34 [ 50.018071] MEM window:
e0300000-e03fffff May 29 17:39:11 p34 [ 50.018189] PREFETCH window:
e0800000-e08fffff May 29 17:39:11 p34 [ 50.018297] PCI: Bridge:
0000:00:1c.3 May 29 17:39:11 p34 [ 50.018382] IO window: 3000-3fff May 29
17:39:11 p34 [ 50.018504] MEM window: e0200000-e02fffff May 29 17:39:11
p34 [ 50.018598] PREFETCH window: e0900000-e09fffff May 29 17:39:11 p34 [
50.018707] PCI: Bridge: 0000:00:1c.4 May 29 17:39:11 p34 [ 50.018792] IO
window: 2000-2fff May 29 17:39:11 p34 [ 50.018885] MEM window:
e0100000-e01fffff May 29 17:39:11 p34 [ 50.018976] PREFETCH window:
e0a00000-e0afffff May 29 17:39:11 p34 [ 50.019121] PCI: Bridge:
0000:00:1e.0 May 29 17:39:11 p34 [ 50.019234] IO window: 1000-1fff May 29
17:39:11 p34 [ 50.019325] MEM window: e0000000-e00fffff May 29 17:39:11
p34 [ 50.019436] PREFETCH window: e0b00000-e0bfffff May 29 17:39:11 p34 [
50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ
17 May 29 17:39:11 p34 [ 50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] ->
GSI 16 (level, low) -> IRQ 16 May 29 17:39:11 p34 [ 50.020251] ACPI: PCI
Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 May 29 17:39:11
p34 [ 50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low)
-> IRQ 19 May 29 17:39:11 p34 [ 50.020829] ACPI: PCI Interrupt
0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 May 29 17:39:11 p34 [
50.022111] NET: Registered protocol family 2 May 29 17:39:11 p34 [
50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes) May 29 17:39:11 p34 [ 50.041151] TCP established hash table entries:
131072 (order: 9, 3145728 bytes) May 29 17:39:11 p34 [ 50.053741] TCP bind
hash table entries: 65536 (order: 8, 1048576 bytes) May 29 17:39:11 p34 [
50.057942] TCP: Hash tables configured (established 131072 bind 65536) May 29
17:39:11 p34 [ 50.058031] TCP reno registered May 29 17:39:11 p34 [
50.104079] Installing knfsd (copyright (C) 1996 [email protected]). May 29
17:39:11 p34 [ 50.108290] SGI XFS with large block/inode numbers, no debug
enabled May 29 17:39:11 p34 [ 50.124796] io scheduler noop registered May
29 17:39:11 p34 [ 50.124877] io scheduler anticipatory registered (default)
May 29 17:39:11 p34 [ 50.130760] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.133909] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.136992] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.139916] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.142907] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.217615] lp: driver loaded but no devices found May
29 17:39:11 p34 [ 50.219124] Real Time Clock Driver v1.12ac May 29 17:39:11
p34 [ 50.221782] Linux agpgart interface v0.102 (c) Dave Jones May 29
17:39:11 p34 [ 50.223328] agpgart: Detected an Intel 965G Chipset. May 29
17:39:11 p34 [ 50.224565] agpgart: Detected 7676K stolen memory. May 29
17:39:11 p34 [ 50.243289] agpgart: AGP aperture is 256M @ 0xd0000000 May 29
17:39:11 p34 [ 50.243856] [drm] Initialized drm 1.1.0 20060810 May 29
17:39:11 p34 [ 50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16
(level, low) -> IRQ 16 May 29 17:39:11 p34 [ 50.246322] [drm] Initialized
i915 1.6.0 20060119 on minor 0 May 29 17:39:11 p34 [ 50.247415] parport:
PnPBIOS parport detected. May 29 17:39:11 p34 [ 50.247654] parport0:
PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] May
29 17:39:11 p34 [ 50.331362] lp0: using parport0 (interrupt-driven). May 29
17:39:11 p34 [ 50.341355] loop: loaded (max 8 devices) May 29 17:39:11 p34
[ 50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI May
29 17:39:11 p34 [ 50.341528] Copyright (c) 1999-2006 Intel Corporation. May
29 17:39:11 p34 [ 50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20
(level, low) -> IRQ 20 May 29 17:39:11 p34 [ 50.360685] e1000:
0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43
May 29 17:39:11 p34 [ 50.439132] e1000: eth0: e1000_probe: Intel(R)
PRO/1000 Network Connection May 29 17:39:11 p34 [ 50.439655] ACPI: PCI
Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21 May 29 17:39:11
p34 [ 50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit)
00:0e:0c:00:cd:b1 May 29 17:39:11 p34 [ 50.857482] e1000: eth1:
e1000_probe: Intel(R) PRO/1000 Network Connection May 29 17:39:11 p34 [
50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ
22 May 29 17:39:11 p34 [ 51.107171] e1000: 0000:06:01.0: e1000_probe:
(PCI:33MHz:32-bit) 00:07:e9:29:37:db May 29 17:39:11 p34 [ 51.136221]
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection May 29
17:39:11 p34 [ 51.138251] netconsole: device eth0 not up yet, forcing it
May 29 17:39:11 p34 [ 53.180364] e1000: eth0: e1000_watchdog: NIC Link is
Up 1000 Mbps Full Duplex, Flow Control: RX/TX May 29 17:39:11 p34 [
53.683096] netconsole: network logging started May 29 17:39:11 p34 [
53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] -> May 29 17:39:11 p34 GSI 19
(level, low) -> IRQ 19 May 29 17:39:12 p34 [ 54.687783] ahci 0000:00:1f.2:
AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode May 29 17:39:12
p34 [ 54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
May 29 17:39:12 p34 [ 54.690522] ata1: SATA max UDMA/133 cmd
0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.692552] ata2: SATA max UDMA/133 cmd
0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.694637] ata3: SATA max UDMA/133 cmd
0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.696669] ata4: SATA max UDMA/133 cmd
0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.698687] ata5: SATA max UDMA/133 cmd
0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.700726] ata6: SATA max UDMA/133 cmd
0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.701011] scsi0 : ahci May 29 17:39:13 p34 [
55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29
17:39:13 p34 [ 55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max
UDMA/133 May 29 17:39:13 p34 [ 55.165604] ata1.00: 145226112 sectors, multi
0: LBA48 May 29 17:39:13 p34 [ 55.169510] ata1.00: configured for UDMA/133
May 29 17:39:13 p34 [ 55.170050] scsi1 : ahci May 29 17:39:13 p34 [
55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29
17:39:13 p34 [ 55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max
UDMA/133 May 29 17:39:13 p34 [ 55.635625] ata2.00: 145226112 sectors, multi
0: LBA48 May 29 17:39:13 p34 [ 55.639563] ata2.00: configured for UDMA/133
May 29 17:39:13 p34 [ 55.639885] scsi2 : ahci May 29 17:39:14 p34 [
56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29
17:39:14 p34 [ 56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20,
max UDMA/133 May 29 17:39:14 p34 [ 56.102086] ata3.00: 293046768 sectors,
multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14 p34 [ 56.104825] ata3.00:
configured for UDMA/133 May 29 17:39:14 p34 [ 56.105036] scsi3 : ahci May
29 17:39:14 p34 [ 56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113
SControl 300) May 29 17:39:14 p34 [ 56.569281] ata4.00: ATA-7: WDC
WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:14 p34 [ 56.569423]
ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:14
p34 [ 56.572150] ata4.00: configured for UDMA/133 May 29 17:39:14 p34 [
56.572391] scsi4 : ahci May 29 17:39:15 p34 [ 57.032365] ata5: SATA link up
1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:15 p34 [ 57.034115]
ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:15
p34 [ 57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth
31/32) May 29 17:39:15 p34 [ 57.036865] ata5.00: configured for UDMA/133
May 29 17:39:15 p34 [ 57.037078] scsi5 : ahci May 29 17:39:15 p34 [
57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 29
17:39:15 p34 [ 57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20,
max UDMA/133 May 29 17:39:15 p34 [ 57.498438] ata6.00: 293046768 sectors,
multi 0: LBA48 NCQ (depth 31/32) May 29 17:39:15 p34 [ 57.501093] ata6.00:
configured for UDMA/133 May 29 17:39:15 p34 [ 57.502916] scsi 0:0:0:0:
Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29
17:39:15 p34 [ 57.505120] SCSI device sda: 145226112 512-byte hdwr sectors
(74356 MB) May 29 17:39:15 p34 [ 57.505456] sda: Write Protect is off May
29 17:39:15 p34 [ 57.506051] SCSI device sda: write cache: enabled, read
cache: enabled, doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.507023]
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15
p34 [ 57.507356] sda: Write Protect is off May 29 17:39:15 p34 [
57.507977] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.508155] sda:
May 29 17:39:15 p34 sda1
May 29 17:39:15 p34 sda2
May 29 17:39:15 p34 sda3
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.524234] sd 0:0:0:0: Attached
scsi disk sda May 29 17:39:15 p34 [ 57.526473] scsi 1:0:0:0: Direct-Access
ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [
57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29
17:39:15 p34 [ 57.528824] sdb: Write Protect is off May 29 17:39:15 p34 [
57.529324] SCSI device sdb: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.530179] SCSI device
sdb: 145226112 512-byte hdwr sectors (74356 MB) May 29 17:39:15 p34 [
57.530511] sdb: Write Protect is off May 29 17:39:15 p34 [ 57.531016] SCSI
device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:15 p34 [ 57.531162] sdb:
May 29 17:39:15 p34 sdb1
May 29 17:39:15 p34 sdb2
May 29 17:39:15 p34 sdb3
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.545063] sd 1:0:0:0: Attached
scsi disk sdb May 29 17:39:15 p34 [ 57.547103] scsi 2:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [
57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:15 p34 [ 57.549322] sdc: Write Protect is off May 29 17:39:15 p34
[ 57.549869] SCSI device sdc: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.550710] SCSI device
sdc: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [
57.551003] sdc: Write Protect is off May 29 17:39:15 p34 [ 57.551505] SCSI
device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:15 p34 [ 57.551726] sdc:
May 29 17:39:15 p34 sdc1
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.565362] sd 2:0:0:0: Attached
scsi disk sdc May 29 17:39:15 p34 [ 57.567447] scsi 3:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [
57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:15 p34 [ 57.569725] sdd: Write Protect is off May 29 17:39:15 p34
[ 57.570218] SCSI device sdd: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.571193] SCSI device
sdd: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [
57.571500] sdd: Write Protect is off May 29 17:39:15 p34 [ 57.572003] SCSI
device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:15 p34 [ 57.572162] sdd:
May 29 17:39:15 p34 sdd1
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.587442] sd 3:0:0:0: Attached
scsi disk sdd May 29 17:39:15 p34 [ 57.589470] scsi 4:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [
57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:15 p34 [ 57.591632] sde: Write Protect is off May 29 17:39:15 p34
[ 57.592147] SCSI device sde: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.593038] SCSI device
sde: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [
57.593357] sde: Write Protect is off May 29 17:39:15 p34 [ 57.593826] SCSI
device sde: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:15 p34 [ 57.594001] sde:
May 29 17:39:15 p34 sde1
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.605438] sd 4:0:0:0: Attached
scsi disk sde May 29 17:39:15 p34 [ 57.607617] scsi 5:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:15 p34 [
57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:15 p34 [ 57.609770] sdf: Write Protect is off May 29 17:39:15 p34
[ 57.610284] SCSI device sdf: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:15 p34 [ 57.611221] SCSI device
sdf: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:15 p34 [
57.611518] sdf: Write Protect is off May 29 17:39:15 p34 [ 57.612049] SCSI
device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:15 p34 [ 57.612225] sdf:
May 29 17:39:15 p34 sdf1
May 29 17:39:15 p34 May 29 17:39:15 p34 [ 57.623709] sd 5:0:0:0: Attached
scsi disk sdf May 29 17:39:15 p34 [ 57.626592] ACPI: PCI Interrupt
0000:03:00.0[A] -> May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18 May 29
17:39:15 p34 [ 57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000
ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [
57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 18 May 29 17:39:15 p34 [
57.630185] scsi6 : sata_sil24 May 29 17:39:16 p34 [ 58.036965] ata7: SATA
link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [
58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May
29 17:39:16 p34 [ 58.039153] ata7.00: 293046768 sectors, multi 16: LBA48
NCQ (depth 31/32) May 29 17:39:16 p34 [ 58.042162] ata7.00: configured for
UDMA/100 May 29 17:39:16 p34 [ 58.042345] scsi7 : sata_sil24 May 29
17:39:16 p34 [ 58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl
300) May 29 17:39:16 p34 [ 58.450325] ata8.00: ATA-7: WDC
WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:16 p34 [ 58.450480]
ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29 17:39:16
p34 [ 58.453526] ata8.00: configured for UDMA/100 May 29 17:39:16 p34 [
58.454693] scsi 6:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ:
0 ANSI: 5 May 29 17:39:16 p34 [ 58.456666] SCSI device sdg: 293046768
512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [ 58.456964] sdg:
Write Protect is off May 29 17:39:16 p34 [ 58.458045] SCSI device sdg:
write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29
17:39:16 p34 [ 58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors
(150040 MB) May 29 17:39:16 p34 [ 58.459203] sdg: Write Protect is off May
29 17:39:16 p34 [ 58.459754] SCSI device sdg: write cache: enabled, read
cache: enabled, doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.459918]
sdg:
May 29 17:39:16 p34 sdg1
May 29 17:39:16 p34 May 29 17:39:16 p34 [ 58.474199] sd 6:0:0:0: Attached
scsi disk sdg May 29 17:39:16 p34 [ 58.476416] scsi 7:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:16 p34 [
58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:16 p34 [ 58.478711] sdh: Write Protect is off May 29 17:39:16 p34
[ 58.479177] SCSI device sdh: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:16 p34 [ 58.480075] SCSI device
sdh: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:16 p34 [
58.480402] sdh: Write Protect is off May 29 17:39:16 p34 [ 58.480928] SCSI
device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:16 p34 [ 58.481075] sdh:
May 29 17:39:16 p34 sdh1
May 29 17:39:16 p34 May 29 17:39:16 p34 [ 58.495586] sd 7:0:0:0: Attached
scsi disk sdh May 29 17:39:16 p34 [ 58.496786] ACPI: PCI Interrupt
0000:04:00.0[A] -> May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19 May 29
17:39:16 p34 [ 58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000
ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [
58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 19 May 29 17:39:16 p34 [
58.499831] scsi8 : sata_sil24 May 29 17:39:16 p34 [ 58.906766] ata9: SATA
link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:16 p34 [
58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May
29 17:39:16 p34 [ 58.908698] ata9.00: 293046768 sectors, multi 16: LBA48
NCQ (depth 31/32) May 29 17:39:16 p34 [ 58.911323] ata9.00: configured for
UDMA/100 May 29 17:39:16 p34 [ 58.911545] scsi9 : sata_sil24 May 29
17:39:17 p34 [ 59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113
SControl 300) May 29 17:39:17 p34 [ 59.319759] ata10.00: ATA-7: WDC
WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:17 p34 [ 59.319892]
ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29
17:39:17 p34 [ 59.322532] ata10.00: configured for UDMA/100 May 29 17:39:17
p34 [ 59.323739] scsi 8:0:0:0: Direct-Access ATA WDC WD1500ADFD-0
20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [ 59.325657] SCSI device sdi:
293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [
59.325964] sdi: Write Protect is off May 29 17:39:17 p34 [ 59.326500] SCSI
device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:17 p34 [ 59.327388] SCSI device sdi: 293046768 512-byte
hdwr sectors (150040 MB) May 29 17:39:17 p34 [ 59.327707] sdi: Write
Protect is off May 29 17:39:17 p34 [ 59.328203] SCSI device sdi: write
cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29
17:39:17 p34 [ 59.328380] sdi:
May 29 17:39:17 p34 sdi1
May 29 17:39:17 p34 May 29 17:39:17 p34 [ 59.340639] sd 8:0:0:0: Attached
scsi disk sdi May 29 17:39:17 p34 [ 59.342775] scsi 9:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:17 p34 [
59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:17 p34 [ 59.345103] sdj: Write Protect is off May 29 17:39:17 p34
[ 59.345608] SCSI device sdj: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:17 p34 [ 59.346489] SCSI device
sdj: 293046768 5
May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB) May 29 17:39:17 p34 [
59.346850] sdj: Write Protect is off May 29 17:39:17 p34 [ 59.347393] SCSI
device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:17 p34 [ 59.347552] sdj:
May 29 17:39:17 p34 sdj1
May 29 17:39:17 p34 May 29 17:39:17 p34 [ 59.362148] sd 9:0:0:0: Attached
scsi disk sdj May 29 17:39:17 p34 [ 59.363387] ACPI: PCI Interrupt
0000:05:00.0[A] -> May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16 May 29
17:39:17 p34 [ 59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000
ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [
59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 16 May 29 17:39:17 p34 [
59.367432] scsi10 : sata_sil24 May 29 17:39:17 p34 [ 59.775363] ata11: SATA
link up 1.5 Gbps (SStatus 113 SControl 300) May 29 17:39:17 p34 [
59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May
29 17:39:17 p34 [ 59.777565] ata11.00: 293046768 sectors, multi 16: LBA48
NCQ (depth 31/32) May 29 17:39:17 p34 [ 59.780599] ata11.00: configured for
UDMA/100 May 29 17:39:17 p34 [ 59.780798] scsi11 : sata_sil24 May 29
17:39:18 p34 [ 60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113
SControl 300) May 29 17:39:18 p34 [ 60.189625] ata12.00: ATA-7: WDC
WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 May 29 17:39:18 p34 [ 60.189769]
ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) May 29
17:39:18 p34 [ 60.192796] ata12.00: configured for UDMA/100 May 29 17:39:18
p34 [ 60.193974] scsi 10:0:0:0: Direct-Access ATA WDC WD1500ADFD-0
20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [ 60.195832] SCSI device sdk:
293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [
60.196127] sdk: Write Protect is off May 29 17:39:18 p34 [ 60.196614] SCSI
device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:18 p34 [ 60.197514] SCSI device sdk: 293046768 512-byte
hdwr sectors (150040 MB) May 29 17:39:18 p34 [ 60.197845] sdk: Write
Protect is off May 29 17:39:18 p34 [ 60.198333] SCSI device sdk: write
cache: enabled, read cache: enabled, doesn't support DPO or FUA May 29
17:39:18 p34 [ 60.198507] sdk:
May 29 17:39:18 p34 sdk1
May 29 17:39:18 p34 May 29 17:39:18 p34 [ 60.212748] sd 10:0:0:0: Attached
scsi disk sdk May 29 17:39:18 p34 [ 60.214934] scsi 11:0:0:0: Direct-Access
ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 May 29 17:39:18 p34 [
60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB) May
29 17:39:18 p34 [ 60.217271] sdl: Write Protect is off May 29 17:39:18 p34
[ 60.217774] SCSI device sdl: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA May 29 17:39:18 p34 [ 60.218665] SCSI device
sdl: 293046768 512-byte hdwr sectors (150040 MB) May 29 17:39:18 p34 [
60.218974] sdl: Write Protect is off May 29 17:39:18 p34 [ 60.219497] SCSI
device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or
FUA May 29 17:39:18 p34 [ 60.219671] sdl:
May 29 17:39:18 p34 sdl1
May 29 17:39:18 p34 May 29 17:39:18 p34 [ 60.234367] sd 11:0:0:0: Attached
scsi disk sdl May 29 17:39:18 p34 [ 60.236317] ACPI: PCI Interrupt
0000:02:00.0[A] -> May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17 May 29
17:39:18 p34 [ 60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018
ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17 May 29 17:39:18 p34 [
60.237631] scsi12 : pata_marvell May 29 17:39:18 p34 [ 60.239266] BAR5:
May 29 17:39:18 p34 00:00 May 29 17:39:18 p34 01:7F May 29 17:39:18 p34 02:22
May 29 17:39:18 p34 03:CA May 29 17:39:18 p34 04:00 May 29 17:39:18 p34 05:00
May 29 17:39:18 p34 06:00 May 29 17:39:18 p34 07:00 May 29 17:39:18 p34 08:00
May 29 17:39:18 p34 09:00 May 29 17:39:18 p34 0A:00 May 29 17:39:18 p34 0B:00
May 29 17:39:18 p34 0C:01 May 29 17:39:18 p34 0D:00 May 29 17:39:18 p34 0E:00
May 29 17:39:18 p34 0F:00 May 29 17:39:18 p34 May 29 17:39:18 p34 [
60.545828] ata13.00: ATAPI, max UDMA/33 May 29 17:39:18 p34 [ 60.701530]
ata13.00: configured for UDMA/33 May 29 17:39:18 p34 [ 60.703942] scsi
12:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5 May
29 17:39:18 p34 [ 60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw
xa/form2 cdda tray May 29 17:39:18 p34 [ 60.711545] Uniform CD-ROM driver
Revision: 3.20 May 29 17:39:18 p34 [ 60.714694] ACPI: PCI Interrupt
0000:00:1a.7[C] -> May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18 May 29
17:39:18 p34 [ 60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller May
29 17:39:18 p34 [ 60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered,
assigned bus number 1 May 29 17:39:18 p34 [ 60.716562] ehci_hcd
0000:00:1a.7: debug port 1 May 29 17:39:18 p34 [ 60.716810] ehci_hcd
0000:00:1a.7: irq 18, io mem 0xe0625c00 May 29 17:39:18 p34 [ 60.720814]
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 29
17:39:18 p34 [ 60.723647] usb usb1: configuration #1 chosen from 1 choice
May 29 17:39:18 p34 [ 60.724706] hub 1-0:1.0: USB hub found May 29 17:39:18
p34 [ 60.724901] hub 1-0:1.0: 4 ports detected May 29 17:39:18 p34 [
60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] -> May 29 17:39:18 p34 GSI 23
(level, low) -> IRQ 23 May 29 17:39:18 p34 [ 60.829583] ehci_hcd
0000:00:1d.7: EHCI Host Controller May 29 17:39:18 p34 [ 60.830451]
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 May 29
17:39:18 p34 [ 60.830986] ehci_hcd 0000:00:1d.7: debug port 1 May 29
17:39:18 p34 [ 60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800
May 29 17:39:18 p34 [ 60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00, driver 10 Dec 2004 May 29 17:39:18 p34 [ 60.837971] usb usb2:
configuration #1 chosen from 1 choice May 29 17:39:18 p34 [ 60.839024] hub
2-0:1.0: USB hub found May 29 17:39:18 p34 [ 60.839241] hub 2-0:1.0: 6
ports detected May 29 17:39:19 p34 [ 60.942849] USB Universal Host
Controller Interface driver v3.0 May 29 17:39:19 p34 [ 60.943912] ACPI: PCI
Interrupt 0000:00:1a.0[A] -> May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ
16 May 29 17:39:19 p34 [ 60.944250] uhci_hcd 0000:00:1a.0: UHCI Host
Controller May 29 17:39:19 p34 [ 60.945081] uhci_hcd 0000:00:1a.0: new USB
bus registered, assigned bus number 3 May 29 17:39:19 p34 [ 60.945338]
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0 May 29 17:39:19 p34 [
60.948562] usb usb3: configuration #1 chosen from 1 choice May 29 17:39:19
p34 [ 60.949639] hub 3-0:1.0: USB hub found May 29 17:39:19 p34 [
60.949832] hub 3-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.053768]
ACPI: PCI Interrupt 0000:00:1a.1[B] -> May 29 17:39:19 p34 GSI 21 (level,
low) -> IRQ 21 May 29 17:39:19 p34 [ 61.054098] uhci_hcd 0000:00:1a.1: UHCI
Host Controller May 29 17:39:19 p34 [ 61.054937] uhci_hcd 0000:00:1a.1: new
USB bus registered, assigned bus number 4 May 29 17:39:19 p34 [ 61.055187]
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0 May 29 17:39:19 p34 [
61.058179] usb usb4: configuration #1 chosen from 1 choice May 29 17:39:19
p34 [ 61.059320] hub 4-0:1.0: USB hub found May 29 17:39:19 p34 [
61.059500] hub 4-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.162594]
ACPI: PCI Interrupt 0000:00:1d.0[A] -> May 29 17:39:19 p34 GSI 23 (level,
low) -> IRQ 23 May 29 17:39:19 p34 [ 61.162944] uhci_hcd 0000:00:1d.0: UHCI
Host Controller May 29 17:39:19 p34 [ 61.163751] uhci_hcd 0000:00:1d.0: new
USB bus registered, assigned bus number 5 May 29 17:39:19 p34 [ 61.164039]
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 May 29 17:39:19 p34 [
61.166996] usb usb5: configuration #1 chosen from 1 choice May 29 17:39:19
p34 [ 61.168132] hub 5-0:1.0: USB hub found May 29 17:39:19 p34 [
61.168320] hub 5-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.271253]
ACPI: PCI Interrupt 0000:00:1d.1[B] -> May 29 17:39:19 p34 GSI 19 (level,
low) -> IRQ 19 May 29 17:39:19 p34 [ 61.271587] uhci_hcd 0000:00:1d.1: UHCI
Host Controller May 29 17:39:19 p34 [ 61.272501] uhci_hcd 0000:00:1d.1: new
USB bus registered, assigned bus number 6 May 29 17:39:19 p34 [ 61.272757]
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 May 29 17:39:19 p34 [
61.275754] usb usb6: configuration #1 chosen from 1 choice May 29 17:39:19
p34 [ 61.276869] hub 6-0:1.0: USB hub found May 29 17:39:19 p34 [
61.277042] hub 6-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.379999]
ACPI: PCI Interrupt 0000:00:1d.2[C] -> May 29 17:39:19 p34 GSI 18 (level,
low) -> IRQ 18 May 29 17:39:19 p34 [ 61.380331] uhci_hcd 0000:00:1d.2: UHCI
Host Controller May 29 17:39:19 p34 [ 61.381211] uhci_hcd 0000:00:1d.2: new
USB bus registered, assigned bus number 7 May 29 17:39:19 p34 [ 61.381464]
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 May 29 17:39:19 p34 [
61.385027] usb usb7: configuration #1 chosen from 1 choice May 29 17:39:19
p34 [ 61.386139] hub 7-0:1.0: USB hub found May 29 17:39:19 p34 [
61.386313] hub 7-0:1.0: 2 ports detected May 29 17:39:19 p34 [ 61.477697]
usb 5-1: new low speed USB device using uhci_hcd and address 2 May 29
17:39:19 p34 [ 61.489915] Initializing USB Mass Storage driver... May 29
17:39:19 p34 [ 61.641966] usb 5-1: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.647974] usbcore: registered new interface driver
usb-storage May 29 17:39:19 p34 [ 61.648124] USB Mass Storage support
registered. May 29 17:39:19 p34 [ 61.649681] usbcore: registered new
interface driver hiddev May 29 17:39:20 p34 [ 62.146211] May 29 17:39:20
p34 hiddev96
May 29 17:39:20 p34 : USB HID v1.00 Device [ UPS] on
usb-0000:00:1d.0-1 May 29 17:39:20 p34 [ 62.146611] usbcore: registered new
interface driver usbhid May 29 17:39:20 p34 [ 62.146747]
drivers/usb/input/hid-core.c: v2.6:USB HID core driver May 29 17:39:20 p34 [
62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
1,12 May 29 17:39:20 p34 [ 62.152574] serio: i8042 KBD port at 0x60,0x64
irq 1 May 29 17:39:20 p34 [ 62.152739] serio: i8042 AUX port at 0x60,0x64
irq 12 May 29 17:39:20 p34 [ 62.153709] mice: PS/2 mouse device common for
all mice May 29 17:39:20 p34 [ 62.157353] input: PC Speaker as
/class/input/input0 May 29 17:39:20 p34 [ 62.157569] i2c /dev entries
driver May 29 17:39:20 p34 [ 62.158424] md: raid1 personality registered
for level 1 May 29 17:39:20 p34 [ 62.174745] raid6: int64x1 62 MB/s May
29 17:39:20 p34 [ 62.178692] input: AT Translated Set 2 keyboard as
/class/input/input1 May 29 17:39:20 p34 [ 62.192019] raid6: int64x2 89
MB/s May 29 17:39:20 p34 [ 62.209023] raid6: int64x4 31 MB/s May 29
17:39:20 p34 [ 62.225777] raid6: int64x8 11 MB/s May 29 17:39:20 p34 [
62.242854] raid6: sse2x1 148 MB/s May 29 17:39:20 p34 [ 62.259636]
raid6: sse2x2 269 MB/s May 29 17:39:20 p34 [ 62.276650] raid6: sse2x4
460 MB/s May 29 17:39:20 p34 [ 62.276789] raid6: using algorithm sse2x4
(460 MB/s) May 29 17:39:20 p34 [ 62.276937] md: raid6 personality
registered for level 6 May 29 17:39:20 p34 [ 62.277053] md: raid5
personality registered for level 5 May 29 17:39:20 p34 [ 62.277191] md:
raid4 personality registered for level 4 May 29 17:39:20 p34 [ 62.277346]
raid5: automatically using best checksumming function: generic_sse May 29
17:39:20 p34 [ 62.281657] generic_sse: 56.000 MB/sec May 29 17:39:20
p34 [ 62.281777] raid5: using function: generic_sse (56.000 MB/sec) May 29
17:39:20 p34 [ 62.282244] Advanced Linux Sound Architecture Driver Version
1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). May 29 17:39:20 p34 [ 62.288220]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> May 29 17:39:20 p34 GSI 22 (level,
low) -> IRQ 22 May 29 17:39:20 p34 [ 62.839554] input: ImPS/2 Generic Wheel
Mouse as /class/input/input2 May 29 17:39:21 p34 [ 63.412487] hda_intel:
azx_get_response timeout, switching to polling mode... May 29 17:39:21 p34 [
63.435772] ALSA device list: May 29 17:39:21 p34 [ 63.435876] #0: HDA
Intel at 0xe0620000 irq 22 May 29 17:39:21 p34 [ 63.436031] u32 classifier
May 29 17:39:21 p34 [ 63.436148] Actions configured May 29 17:39:21 p34
[ 63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) May 29
17:39:21 p34 [ 63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team May
29 17:39:21 p34 [ 63.439995] TCP cubic registered May 29 17:39:21 p34 [
63.440386] NET: Registered protocol family 1 May 29 17:39:21 p34 [
63.440507] NET: Registered protocol family 17 May 29 17:39:21 p34 [
63.445397] md: Autodetecting RAID arrays. May 29 17:39:21 p34 [ 63.572955]
md: autorun ... May 29 17:39:21 p34 [ 63.573095] md: considering sdl1 ...
May 29 17:39:21 p34 [ 63.573596] md: adding sdl1 ... May 29 17:39:21 p34 [
63.573924] md: adding sdk1 ... May 29 17:39:21 p34 [ 63.574312] md:
adding sdj1 ... May 29 17:39:21 p34 [ 63.574664] md: adding sdi1 ... May
29 17:39:21 p34 [ 63.575005] md: adding sdh1 ... May 29 17:39:21 p34 [
63.575396] md: adding sdg1 ... May 29 17:39:21 p34 [ 63.575754] md:
adding sdf1 ... May 29 17:39:21 p34 [ 63.576089] md: adding sde1 ... May
29 17:39:21 p34 [ 63.576472] md: adding sdd1 ... May 29 17:39:21 p34 [
63.576824] md: adding sdc1 ... May 29 17:39:21 p34 [ 63.577015] md: sdb3
has different UUID to sdl1 May 29 17:39:21 p34 [ 63.577204] md: sdb2 has
different UUID to sdl1 May 29 17:39:21 p34 [ 63.577446] md: sdb1 has
different UUID to sdl1 May 29 17:39:21 p34 [ 63.577647] md: sda3 has
different UUID to sdl1 May 29 17:39:21 p34 [ 63.577846] md: sda2 has
different UUID to sdl1 May 29 17:39:21 p34 [ 63.578043] md: sda1 has
different UUID to sdl1 May 29 17:39:21 p34 [ 63.579527] md: created md3 May
29 17:39:21 p34 [ 63.579639] md: bind<sdc1> May 29 17:39:21 p34 [
63.579956] md: bind<sdd1> May 29 17:39:21 p34 [ 63.580329] md: bind<sde1>
May 29 17:39:21 p34 [ 63.580627] md: bind<sdf1> May 29 17:39:21 p34 [
63.580933] md: bind<sdg1> May 29 17:39:21 p34 [ 63.581229] md: bind<sdh1>
May 29 17:39:21 p34 [ 63.581624] md: bind<sdi1> May 29 17:39:21 p34 [
63.582103] md: bind<sdj1> May 29 17:39:21 p34 [ 63.582436] md: bind<sdk1>
May 29 17:39:21 p34 [ 63.582776] md: bind<sdl1> May 29 17:39:21 p34 [
63.583100] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [
63.586384] raid5: device sdl1 operational as raid disk 2 May 29 17:39:21 p34
[ 63.586509] raid5: device sdk1 operational as raid disk 3 May 29 17:39:21
p34 [ 63.586656] raid5: device sdj1 operational as raid disk 0 May 29
17:39:21 p34 [ 63.586829] raid5: device sdi1 operational as raid disk 1 May
29 17:39:21 p34 [ 63.586973] raid5: device sdh1 operational as raid disk 6
May 29 17:39:21 p34 [ 63.587122] raid5: device sdg1 operational as raid
disk 5 May 29 17:39:21 p34 [ 63.587317] raid5: device sdf1 operational as
raid disk 4 May 29 17:39:21 p34 [ 63.587459] raid5: device sde1 operational
as raid disk 7 May 29 17:39:21 p34 [ 63.587603] raid5: device sdd1
operational as raid disk 8 May 29 17:39:21 p34 [ 63.587758] raid5: device
sdc1 operational as raid disk 9 May 29 17:39:21 p34 [ 63.608186] raid5:
allocated 10562kB for md3 May 29 17:39:21 p34 [ 63.608334] raid5: raid
level 5 set md3 active with 10 out of 10 devices, algorithm 2 May 29 17:39:21
p34 [ 63.608519] RAID5 conf printout: May 29 17:39:21 p34 [ 63.608639]
--- rd:10 wd:10 May 29 17:39:21 p34 [ 63.608767] disk 0, o:1, dev:sdj1 May
29 17:39:21 p34 [ 63.608897] disk 1, o:1, dev:sdi1 May 29 17:39:21 p34 [
63.609073] disk 2, o:1, dev:sdl1 May 29 17:39:21 p34 [ 63.609184] disk 3,
o:1, dev:sdk1 May 29 17:39:21 p34 [ 63.609346] disk 4, o:1, dev:sdf1 May
29 17:39:21 p34 [ 63.609507] disk 5, o:1, dev:sdg1 May 29 17:39:21 p34 [
63.609640] disk 6, o:1, dev:sdh1 May 29 17:39:21 p34 [ 63.609771] disk 7,
o:1, dev:sde1 May 29 17:39:21 p34 [ 63.609903] disk 8, o:1, dev:sdd1 May
29 17:39:21 p34 [ 63.610040] disk 9, o:1, dev:sdc1 May 29 17:39:21 p34 [
63.612460] md: considering sdb3 ... May 29 17:39:21 p34 [ 63.612835] md:
adding sdb3 ... May 29 17:39:21 p34 [ 63.613027] md: sdb2 has different
UUID to sdb3 May 29 17:39:21 p34 [ 63.613220] md: sdb1 has different UUID
to sdb3 May 29 17:39:21 p34 [ 63.613589] md: adding sda3 ... May 29
17:39:21 p34 [ 63.613801] md: sda2 has different UUID to sdb3 May 29
17:39:21 p34 [ 63.613997] md: sda1 has different UUID to sdb3 May 29
17:39:21 p34 [ 63.615606] md: created md2 May 29 17:39:21 p34 [
63.615720] md: bind<sda3> May 29 17:39:21 p34 [ 63.616094] md: bind<sdb3>
May 29 17:39:21 p34 [ 63.616575] md: running: May 29 17:39:21 p34 May 29
17:39:21 p34 [ 63.619316] raid1: raid set md2 active with 2 out of 2
mirrors May 29 17:39:21 p34 [ 63.620513] md: considering sdb2 ... May 29
17:39:21 p34 [ 63.620870] md: adding sdb2 ... May 29 17:39:21 p34 [
63.621082] md: sdb1 has different UUID to sdb2 May 29 17:39:21 p34 [
63.621465] md: adding sda2 ... May 29 17:39:21 p34 [ 63.621646] md: sda1
has different UUID to sdb2 May 29 17:39:21 p34 [ 63.623619] md: created md1
May 29 17:39:21 p34 [ 63.623733] md: bind<sda2> May 29 17:39:21 p34 [
63.624059] md: bind<sdb2> May 29 17:39:21 p34 [ 63.624439] md: running: May
29 17:39:21 p34 May 29 17:39:21 p34 [ 63.627438] raid1: raid set md1 active
with 2 out of 2 mirrors May 29 17:39:21 p34 [ 63.628555] md: considering
sdb1 ... May 29 17:39:21 p34 [ 63.628883] md: adding sdb1 ... May 29
17:39:21 p34 [ 63.629302] md: adding sda1 ... May 29 17:39:21 p34 [
63.629411] md: created md0 May 29 17:39:21 p34 [ 63.629576] md: bind<sda1>
May 29 17:39:21 p34 [ 63.629882] md: bind<sdb1> May 29 17:39:21 p34 [
63.630233] md: running: May 29 17:39:21 p34 May 29 17:39:21 p34 [
63.633438] raid1: raid set md0 active with 2 out of 2 mirrors May 29 17:39:21
p34 [ 63.634598] md: ... autorun DONE. May 29 17:39:21 p34 [ 63.695456]
UDF-fs: No VRS found May 29 17:39:21 p34 [ 63.699158] Filesystem "md2":
Disabling barriers, not supported by the underlying device May 29 17:39:21
p34 [ 63.713776] XFS mounting filesystem md2 May 29 17:39:21 p34 [
63.813743] VFS: Mounted root (xfs filesystem) readonly. May 29 17:39:21 p34 [
63.814115] Freeing unused kernel memory: 220k freed May 29 17:40:39 p34 [
141.447304] Adding 16787768k swap on /dev/md0. Priority:-1 extents:1
across:16787768k May 29 17:40:40 p34 [ 142.497721] Filesystem "md2":
Disabling barriers, not supported by the underlying device May 29 17:41:04
p34 [ 166.716017] kjournald starting. Commit interval 5 seconds May 29
17:41:04 p34 [ 166.729375] EXT3 FS on md1, May 29 17:41:04 p34 internal
journal May 29 17:41:04 p34 [ 166.729663] EXT3-fs: mounted filesystem with
ordered data mode. May 29 17:41:04 p34 [ 166.751799] Filesystem "md3":
Disabling barriers, not supported by the underlying device May 29 17:41:04
p34 [ 166.758717] XFS mounting filesystem md3 May 29 17:41:54 p34 [
216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex,
Flow Control: RX May 29 17:42:29 p34 [ 251.481399] process `syslogd' is
using obsolete setsockopt SO_BSDCOMPAT May 29 17:46:42 p34 [ 504.074171]
mtrr: no more MTRRs available
May 29 17:39:11 p34 [ 0.000000] Linux version 2.6.21.3 ([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 SMP Sun May 27 06:28:33 EDT 2007
May 29 17:39:11 p34 [ 0.000000] Command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 [email protected]/eth0,[email protected]/00:50:8D:ED:3C:E7 nmi_watchdog=1
May 29 17:39:11 p34 [ 0.000000] BIOS-provided physical RAM map:
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf58f000 (usable)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf58f000 - 00000000cf59c000 (reserved)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf59c000 - 00000000cf653000 (usable)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf653000 - 00000000cf6a5000 (ACPI NVS)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a5000 - 00000000cf6a8000 (ACPI data)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6a8000 - 00000000cf6ef000 (ACPI NVS)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6ef000 - 00000000cf6f1000 (ACPI data)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
May 29 17:39:11 p34 [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
May 29 17:39:11 p34 [ 0.000000] end_pfn_map = 2277376
May 29 17:39:11 p34 [ 0.000000] DMI 2.4 present.
May 29 17:39:11 p34 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
May 29 17:39:11 p34 [ 0.000000] ACPI: RSDT CF6FD038, 0050 (r1 INTEL DG965WH 64C 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: FACP CF6FC000, 0074 (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: DSDT CF6F7000, 40E9 (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: FACS CF6A8000, 0040
May 29 17:39:11 p34 [ 0.000000] ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: WDDT CF6F5000, 0040 (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: HPET CF6F2000, 0038 (r1 INTEL DG965WH 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6F0000, 01BC (r1 INTEL CpuPm 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6EF000, 0175 (r1 INTEL Cpu0Ist 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A7000, 0175 (r1 INTEL Cpu1Ist 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A6000, 0175 (r1 INTEL Cpu2Ist 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] ACPI: SSDT CF6A5000, 0175 (r1 INTEL Cpu3Ist 64C MSFT 1000013)
May 29 17:39:11 p34 [ 0.000000] Zone PFN ranges:
May 29 17:39:11 p34 [ 0.000000] DMA 0 -> 4096
May 29 17:39:11 p34 [ 0.000000] DMA32 4096 -> 1048576
May 29 17:39:11 p34 [ 0.000000] Normal 1048576 -> 2277376
May 29 17:39:11 p34 [ 0.000000] early_node_map[6] active PFN ranges
May 29 17:39:11 p34 [ 0.000000] 0: 0 -> 143
May 29 17:39:11 p34 [ 0.000000] 0: 256 -> 849295
May 29 17:39:11 p34 [ 0.000000] 0: 849308 -> 849491
May 29 17:39:11 p34 [ 0.000000] 0: 849649 -> 849650
May 29 17:39:11 p34 [ 0.000000] 0: 849663 -> 849664
May 29 17:39:11 p34 [ 0.000000] 0: 1048576 -> 2277376
May 29 17:39:11 p34 [ 0.000000] ACPI: PM-Timer IO Port: 0x408
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
May 29 17:39:11 p34 [ 0.000000] Processor #0 (Bootup-CPU)
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
May 29 17:39:11 p34 [ 0.000000] Processor #2
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
May 29 17:39:11 p34 [ 0.000000] Processor #1
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
May 29 17:39:11 p34 [ 0.000000] Processor #3
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
May 29 17:39:11 p34 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
May 29 17:39:11 p34 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 29 17:39:11 p34 [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
May 29 17:39:11 p34 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 29 17:39:11 p34 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
May 29 17:39:11 p34 [ 0.000000] Setting APIC routing to flat
May 29 17:39:11 p34 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
May 29 17:39:11 p34 [ 0.000000] Using ACPI (MADT) for SMP configuration information
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf58f000 - 00000000cf59c000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf653000 - 00000000cf6a5000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6a5000 - 00000000cf6a8000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6a8000 - 00000000cf6ef000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6ef000 - 00000000cf6f1000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf6f2000 - 00000000cf6ff000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000cf700000 - 00000000d0000000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000d0000000 - 00000000fff00000
May 29 17:39:11 p34 [ 0.000000] Nosave address range: 00000000fff00000 - 0000000100000000
May 29 17:39:11 p34 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000)
May 29 17:39:11 p34 [ 0.000000] PERCPU: Allocating 24512 bytes of per cpu data
May 29 17:39:11 p34 [ 0.000000] Built 1 zonelists. Total pages: 2045692
May 29 17:39:11 p34 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2.6.21.3-4 ro root=902 [email protected]/eth0,[email protected]/00:50:8D:ED:3C:E7 nmi_watchdog=1
May 29 17:39:11 p34 [ 0.000000] netconsole: local port 4444
May 29 17:39:11 p34 [ 0.000000] netconsole: local IP 192.168.168.253
May 29 17:39:11 p34 [ 0.000000] netconsole: interface eth0
May 29 17:39:11 p34 [ 0.000000] netconsole: remote port 514
May 29 17:39:11 p34 [ 0.000000] netconsole: remote IP 192.168.168.254
May 29 17:39:11 p34 [ 0.000000] netconsole: remote ethernet address 00:50:8d:ed:3c:e7
May 29 17:39:11 p34 [ 0.000000] Initializing CPU#0
May 29 17:39:11 p34 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
May 29 17:39:11 p34 [ 48.249507] time.c: Detected 2397.605 MHz processor.
May 29 17:39:11 p34 [ 48.250572] Console: colour VGA+ 80x25
May 29 17:39:11 p34 [ 48.258651] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
May 29 17:39:11 p34 [ 48.264855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
May 29 17:39:11 p34 [ 48.265963] Checking aperture...
May 29 17:39:11 p34 [ 48.266011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
May 29 17:39:11 p34 [ 48.302233] Placing software IO TLB between 0x95f6000 - 0xd5f6000
May 29 17:39:11 p34 [ 48.374061] Memory: 8103748k/9109504k available (3428k kernel code, 208464k reserved, 1270k data, 220k init)
May 29 17:39:11 p34 [ 48.434756] Calibrating delay using timer specific routine.. 4797.72 BogoMIPS (lpj=2398863)
May 29 17:39:11 p34 [ 48.435408] Mount-cache hash table entries: 256
May 29 17:39:11 p34 [ 48.436246] CPU: L1 I cache: 32K, L1 D cache: 32K
May 29 17:39:11 p34 [ 48.436307] CPU: L2 cache: 4096K
May 29 17:39:11 p34 [ 48.436347] using mwait in idle threads.
May 29 17:39:11 p34 [ 48.436389] CPU: Physical Processor ID: 0
May 29 17:39:11 p34 [ 48.436430] CPU: Processor Core ID: 0
May 29 17:39:11 p34 [ 48.436474] CPU0: Thermal monitoring enabled (TM2)
May 29 17:39:11 p34 [ 48.436526] Freeing SMP alternatives: 36k freed
May 29 17:39:11 p34 [ 48.436584] ACPI: Core revision 20070126
May 29 17:39:11 p34 [ 48.485666] activating NMI Watchdog ... done.
May 29 17:39:11 p34 [ 48.485786] Using local APIC timer interrupts.
May 29 17:39:11 p34 [ 48.527564] result 16650037
May 29 17:39:11 p34 [ 48.527642] Detected 16.650 MHz APIC timer.
May 29 17:39:11 p34 [ 48.529312] Booting processor 1/4 APIC 0x2
May 29 17:39:11 p34 [ 48.539943] Initializing CPU#1
May 29 17:39:11 p34 [ 48.600727] Calibrating delay using timer specific routine.. 4795.07 BogoMIPS (lpj=2397539)
May 29 17:39:11 p34 [ 48.600785] CPU: L1 I cache: 32K, L1 D cache: 32K
May 29 17:39:11 p34 [ 48.600822] CPU: L2 cache: 4096K
May 29 17:39:11 p34 [ 48.600852] CPU: Physical Processor ID: 0
May 29 17:39:11 p34 [ 48.600879] CPU: Processor Core ID: 2
May 29 17:39:11 p34 [ 48.600914] CPU1: Thermal monitoring enabled (TM2)
May 29 17:39:11 p34 [ 48.601348] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
May 29 17:39:11 p34 [ 48.601451] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
May 29 17:39:11 p34 [ 48.623998] Booting processor 2/4 APIC 0x1
May 29 17:39:11 p34 [ 48.635015] Initializing CPU#2
May 29 17:39:11 p34 [ 48.694729] Calibrating delay using timer specific routine.. 4796.63 BogoMIPS (lpj=2398315)
May 29 17:39:11 p34 [ 48.694791] CPU: L1 I cache: 32K, L1 D cache: 32K
May 29 17:39:11 p34 [ 48.694829] CPU: L2 cache: 4096K
May 29 17:39:11 p34 [ 48.694861] CPU: Physical Processor ID: 0
May 29 17:39:11 p34 [ 48.694891] CPU: Processor Core ID: 1
May 29 17:39:11 p34 [ 48.694928] CPU2: Thermal monitoring enabled (TM2)
May 29 17:39:11 p34 [ 48.695368] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
May 29 17:39:11 p34 [ 48.695508] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
May 29 17:39:11 p34 [ 48.717915] Booting processor 3/4 APIC 0x3
May 29 17:39:11 p34 [ 48.728547] Initializing CPU#3
May 29 17:39:11 p34 [ 48.788686] Calibrating delay using timer specific routine.. 4795.46 BogoMIPS (lpj=2397730)
May 29 17:39:11 p34 [ 48.788750] CPU: L1 I cache: 32K, L1 D cache: 32K
May 29 17:39:11 p34 [ 48.788787] CPU: L2 cache: 4096K
May 29 17:39:11 p34 [ 48.788817] CPU: Physical Processor ID: 0
May 29 17:39:11 p34 [ 48.788846] CPU: Processor Core ID: 3
May 29 17:39:11 p34 [ 48.788882] CPU3: Thermal monitoring enabled (TM2)
May 29 17:39:11 p34 [ 48.789318] Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
May 29 17:39:11 p34 [ 48.789446] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
May 29 17:39:11 p34 [ 48.810753] Brought up 4 CPUs
May 29 17:39:11 p34 [ 48.810941] testing NMI watchdog ... OK.
May 29 17:39:11 p34 [ 49.178287] migration_cost=156,193
May 29 17:39:11 p34 [ 49.182074] NET: Registered protocol family 16
May 29 17:39:11 p34 [ 49.183506] ACPI: bus type pci registered
May 29 17:39:11 p34 [ 49.183670] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
May 29 17:39:11 p34 [ 49.183764] PCI: Not using MMCONFIG.
May 29 17:39:11 p34 [ 49.183847] PCI: Using configuration type 1
May 29 17:39:11 p34 [ 49.324928] ACPI: Interpreter enabled
May 29 17:39:11 p34 [ 49.325010] ACPI: Using IOAPIC for interrupt routing
May 29 17:39:11 p34 [ 49.518427] ACPI: PCI Root Bridge [PCI0] (0000:00)
May 29 17:39:11 p34 [ 49.523873] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
May 29 17:39:11 p34 [ 49.523974] PCI quirk: region 0500-053f claimed by ICH6 GPIO
May 29 17:39:11 p34 [ 49.534492] PCI: Transparent bridge - 0000:00:1e.0
May 29 17:39:11 p34 [ 49.792346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
May 29 17:39:11 p34 [ 49.796475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
May 29 17:39:11 p34 [ 49.800543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
May 29 17:39:11 p34 [ 49.804653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
May 29 17:39:11 p34 [ 49.808781] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
May 29 17:39:11 p34 [ 49.812812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
May 29 17:39:11 p34 [ 49.816864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
May 29 17:39:11 p34 [ 49.820999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
May 29 17:39:11 p34 [ 49.824280] Linux Plug and Play Support v0.97 (c) Adam Belay
May 29 17:39:11 p34 [ 49.824569] pnp: PnP ACPI init
May 29 17:39:11 p34 [ 49.923406] pnp: PnP ACPI: found 12 devices
May 29 17:39:11 p34 [ 49.927655] SCSI subsystem initialized
May 29 17:39:11 p34 [ 49.935480] usbcore: registered new interface driver usbfs
May 29 17:39:11 p34 [ 49.936497] usbcore: registered new interface driver hub
May 29 17:39:11 p34 [ 49.939469] usbcore: registered new device driver usb
May 29 17:39:11 p34 [ 49.942750] PCI: Using ACPI for IRQ routing
May 29 17:39:11 p34 [ 49.942851] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
May 29 17:39:11 p34 [ 49.944223] PCI-GART: No AMD northbridge found.
May 29 17:39:11 p34 [ 49.944929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
May 29 17:39:11 p34 [ 49.945145] hpet0: 3 64-bit timers, 14318180 Hz
May 29 17:39:11 p34 [ 49.946417] Time: tsc clocksource has been installed.
May 29 17:39:11 p34 [ 49.947517] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
May 29 17:39:11 p34 [ 49.947640] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
May 29 17:39:11 p34 [ 49.947785] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
May 29 17:39:11 p34 [ 49.947943] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
May 29 17:39:11 p34 [ 49.948125] pnp: 00:06: ioport range 0x500-0x53f has been reserved
May 29 17:39:11 p34 [ 49.948231] pnp: 00:06: ioport range 0x400-0x47f has been reserved
May 29 17:39:11 p34 [ 49.948433] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
May 29 17:39:11 p34 [ 49.961379] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
May 29 17:39:11 p34 [ 50.015143] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0084000-e00847ff] Max Packet=[2048] IR/IT contexts=[4/8]
May 29 17:39:11 p34 [ 50.016694] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
May 29 17:39:11 p34 [ 50.017108] PCI: Bridge: 0000:00:1c.0
May 29 17:39:11 p34 [ 50.017203] IO window: disabled.
May 29 17:39:11 p34 [ 50.017295] MEM window: e0700000-e07fffff
May 29 17:39:11 p34 [ 50.017381] PREFETCH window: disabled.
May 29 17:39:11 p34 [ 50.017507] PCI: Bridge: 0000:00:1c.1
May 29 17:39:11 p34 [ 50.017598] IO window: 5000-5fff
May 29 17:39:11 p34 [ 50.017689] MEM window: e0400000-e04fffff
May 29 17:39:11 p34 [ 50.017776] PREFETCH window: disabled.
May 29 17:39:11 p34 [ 50.017882] PCI: Bridge: 0000:00:1c.2
May 29 17:39:11 p34 [ 50.017966] IO window: 4000-4fff
May 29 17:39:11 p34 [ 50.018071] MEM window: e0300000-e03fffff
May 29 17:39:11 p34 [ 50.018189] PREFETCH window: e0800000-e08fffff
May 29 17:39:11 p34 [ 50.018297] PCI: Bridge: 0000:00:1c.3
May 29 17:39:11 p34 [ 50.018382] IO window: 3000-3fff
May 29 17:39:11 p34 [ 50.018504] MEM window: e0200000-e02fffff
May 29 17:39:11 p34 [ 50.018598] PREFETCH window: e0900000-e09fffff
May 29 17:39:11 p34 [ 50.018707] PCI: Bridge: 0000:00:1c.4
May 29 17:39:11 p34 [ 50.018792] IO window: 2000-2fff
May 29 17:39:11 p34 [ 50.018885] MEM window: e0100000-e01fffff
May 29 17:39:11 p34 [ 50.018976] PREFETCH window: e0a00000-e0afffff
May 29 17:39:11 p34 [ 50.019121] PCI: Bridge: 0000:00:1e.0
May 29 17:39:11 p34 [ 50.019234] IO window: 1000-1fff
May 29 17:39:11 p34 [ 50.019325] MEM window: e0000000-e00fffff
May 29 17:39:11 p34 [ 50.019436] PREFETCH window: e0b00000-e0bfffff
May 29 17:39:11 p34 [ 50.019625] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
May 29 17:39:11 p34 [ 50.019912] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
May 29 17:39:11 p34 [ 50.020251] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
May 29 17:39:11 p34 [ 50.020556] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
May 29 17:39:11 p34 [ 50.020829] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
May 29 17:39:11 p34 [ 50.022111] NET: Registered protocol family 2
May 29 17:39:11 p34 [ 50.032134] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
May 29 17:39:11 p34 [ 50.041151] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
May 29 17:39:11 p34 [ 50.053741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
May 29 17:39:11 p34 [ 50.057942] TCP: Hash tables configured (established 131072 bind 65536)
May 29 17:39:11 p34 [ 50.058031] TCP reno registered
May 29 17:39:11 p34 [ 50.104079] Installing knfsd (copyright (C) 1996 [email protected]).
May 29 17:39:11 p34 [ 50.108290] SGI XFS with large block/inode numbers, no debug enabled
May 29 17:39:11 p34 [ 50.124796] io scheduler noop registered
May 29 17:39:11 p34 [ 50.124877] io scheduler anticipatory registered (default)
May 29 17:39:11 p34 [ 50.130760] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.133909] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.136992] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.139916] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.142907] assign_interrupt_mode Found MSI capability
May 29 17:39:11 p34 [ 50.217615] lp: driver loaded but no devices found
May 29 17:39:11 p34 [ 50.219124] Real Time Clock Driver v1.12ac
May 29 17:39:11 p34 [ 50.221782] Linux agpgart interface v0.102 (c) Dave Jones
May 29 17:39:11 p34 [ 50.223328] agpgart: Detected an Intel 965G Chipset.
May 29 17:39:11 p34 [ 50.224565] agpgart: Detected 7676K stolen memory.
May 29 17:39:11 p34 [ 50.243289] agpgart: AGP aperture is 256M @ 0xd0000000
May 29 17:39:11 p34 [ 50.243856] [drm] Initialized drm 1.1.0 20060810
May 29 17:39:11 p34 [ 50.244141] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
May 29 17:39:11 p34 [ 50.246322] [drm] Initialized i915 1.6.0 20060119 on minor 0
May 29 17:39:11 p34 [ 50.247415] parport: PnPBIOS parport detected.
May 29 17:39:11 p34 [ 50.247654] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
May 29 17:39:11 p34 [ 50.331362] lp0: using parport0 (interrupt-driven).
May 29 17:39:11 p34 [ 50.341355] loop: loaded (max 8 devices)
May 29 17:39:11 p34 [ 50.341437] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
May 29 17:39:11 p34 [ 50.341528] Copyright (c) 1999-2006 Intel Corporation.
May 29 17:39:11 p34 [ 50.342520] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
May 29 17:39:11 p34 [ 50.360685] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:6e:9d:43
May 29 17:39:11 p34 [ 50.439132] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
May 29 17:39:11 p34 [ 50.439655] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
May 29 17:39:11 p34 [ 50.705534] e1000: 0000:06:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:00:cd:b1
May 29 17:39:11 p34 [ 50.857482] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
May 29 17:39:11 p34 [ 50.857724] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22
May 29 17:39:11 p34 [ 51.107171] e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:29:37:db
May 29 17:39:11 p34 [ 51.136221] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
May 29 17:39:11 p34 [ 51.138251] netconsole: device eth0 not up yet, forcing it
May 29 17:39:11 p34 [ 53.180364] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
May 29 17:39:11 p34 [ 53.683096] netconsole: network logging started
May 29 17:39:11 p34 [ 53.686923] ACPI: PCI Interrupt 0000:00:1f.2[A] ->
May 29 17:39:11 p34 GSI 19 (level, low) -> IRQ 19
May 29 17:39:12 p34 [ 54.687783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
May 29 17:39:12 p34 [ 54.687956] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
May 29 17:39:12 p34 [ 54.690522] ata1: SATA max UDMA/133 cmd 0xffffc20000078100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.692552] ata2: SATA max UDMA/133 cmd 0xffffc20000078180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.694637] ata3: SATA max UDMA/133 cmd 0xffffc20000078200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.696669] ata4: SATA max UDMA/133 cmd 0xffffc20000078280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.698687] ata5: SATA max UDMA/133 cmd 0xffffc20000078300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.700726] ata6: SATA max UDMA/133 cmd 0xffffc20000078380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 377
May 29 17:39:12 p34 [ 54.701011] scsi0 : ahci
May 29 17:39:13 p34 [ 55.162816] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:13 p34 [ 55.165434] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
May 29 17:39:13 p34 [ 55.165604] ata1.00: 145226112 sectors, multi 0: LBA48
May 29 17:39:13 p34 [ 55.169510] ata1.00: configured for UDMA/133
May 29 17:39:13 p34 [ 55.170050] scsi1 : ahci
May 29 17:39:13 p34 [ 55.632888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:13 p34 [ 55.635466] ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
May 29 17:39:13 p34 [ 55.635625] ata2.00: 145226112 sectors, multi 0: LBA48
May 29 17:39:13 p34 [ 55.639563] ata2.00: configured for UDMA/133
May 29 17:39:13 p34 [ 55.639885] scsi2 : ahci
May 29 17:39:14 p34 [ 56.100111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:14 p34 [ 56.101908] ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:14 p34 [ 56.102086] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
May 29 17:39:14 p34 [ 56.104825] ata3.00: configured for UDMA/133
May 29 17:39:14 p34 [ 56.105036] scsi3 : ahci
May 29 17:39:14 p34 [ 56.567476] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:14 p34 [ 56.569281] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:14 p34 [ 56.569423] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
May 29 17:39:14 p34 [ 56.572150] ata4.00: configured for UDMA/133
May 29 17:39:14 p34 [ 56.572391] scsi4 : ahci
May 29 17:39:15 p34 [ 57.032365] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:15 p34 [ 57.034115] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:15 p34 [ 57.034245] ata5.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
May 29 17:39:15 p34 [ 57.036865] ata5.00: configured for UDMA/133
May 29 17:39:15 p34 [ 57.037078] scsi5 : ahci
May 29 17:39:15 p34 [ 57.496550] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:15 p34 [ 57.498270] ata6.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:15 p34 [ 57.498438] ata6.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
May 29 17:39:15 p34 [ 57.501093] ata6.00: configured for UDMA/133
May 29 17:39:15 p34 [ 57.502916] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.505120] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
May 29 17:39:15 p34 [ 57.505456] sda: Write Protect is off
May 29 17:39:15 p34 [ 57.506051] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.507023] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
May 29 17:39:15 p34 [ 57.507356] sda: Write Protect is off
May 29 17:39:15 p34 [ 57.507977] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.508155] sda:
May 29 17:39:15 p34 sda1
May 29 17:39:15 p34 sda2
May 29 17:39:15 p34 sda3
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.524234] sd 0:0:0:0: Attached scsi disk sda
May 29 17:39:15 p34 [ 57.526473] scsi 1:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.528478] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
May 29 17:39:15 p34 [ 57.528824] sdb: Write Protect is off
May 29 17:39:15 p34 [ 57.529324] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.530179] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
May 29 17:39:15 p34 [ 57.530511] sdb: Write Protect is off
May 29 17:39:15 p34 [ 57.531016] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.531162] sdb:
May 29 17:39:15 p34 sdb1
May 29 17:39:15 p34 sdb2
May 29 17:39:15 p34 sdb3
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.545063] sd 1:0:0:0: Attached scsi disk sdb
May 29 17:39:15 p34 [ 57.547103] scsi 2:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.549007] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.549322] sdc: Write Protect is off
May 29 17:39:15 p34 [ 57.549869] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.550710] SCSI device sdc: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.551003] sdc: Write Protect is off
May 29 17:39:15 p34 [ 57.551505] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.551726] sdc:
May 29 17:39:15 p34 sdc1
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.565362] sd 2:0:0:0: Attached scsi disk sdc
May 29 17:39:15 p34 [ 57.567447] scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.569384] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.569725] sdd: Write Protect is off
May 29 17:39:15 p34 [ 57.570218] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.571193] SCSI device sdd: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.571500] sdd: Write Protect is off
May 29 17:39:15 p34 [ 57.572003] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.572162] sdd:
May 29 17:39:15 p34 sdd1
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.587442] sd 3:0:0:0: Attached scsi disk sdd
May 29 17:39:15 p34 [ 57.589470] scsi 4:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.591359] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.591632] sde: Write Protect is off
May 29 17:39:15 p34 [ 57.592147] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.593038] SCSI device sde: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.593357] sde: Write Protect is off
May 29 17:39:15 p34 [ 57.593826] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.594001] sde:
May 29 17:39:15 p34 sde1
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.605438] sd 4:0:0:0: Attached scsi disk sde
May 29 17:39:15 p34 [ 57.607617] scsi 5:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:15 p34 [ 57.609437] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.609770] sdf: Write Protect is off
May 29 17:39:15 p34 [ 57.610284] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.611221] SCSI device sdf: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:15 p34 [ 57.611518] sdf: Write Protect is off
May 29 17:39:15 p34 [ 57.612049] SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:15 p34 [ 57.612225] sdf:
May 29 17:39:15 p34 sdf1
May 29 17:39:15 p34
May 29 17:39:15 p34 [ 57.623709] sd 5:0:0:0: Attached scsi disk sdf
May 29 17:39:15 p34 [ 57.626592] ACPI: PCI Interrupt 0000:03:00.0[A] ->
May 29 17:39:15 p34 GSI 18 (level, low) -> IRQ 18
May 29 17:39:15 p34 [ 57.628562] ata7: SATA max UDMA/100 cmd 0xffffc20000108000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18
May 29 17:39:15 p34 [ 57.629915] ata8: SATA max UDMA/100 cmd 0xffffc2000010a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 18
May 29 17:39:15 p34 [ 57.630185] scsi6 : sata_sil24
May 29 17:39:16 p34 [ 58.036965] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:16 p34 [ 58.039003] ata7.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:16 p34 [ 58.039153] ata7.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:16 p34 [ 58.042162] ata7.00: configured for UDMA/100
May 29 17:39:16 p34 [ 58.042345] scsi7 : sata_sil24
May 29 17:39:16 p34 [ 58.448234] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:16 p34 [ 58.450325] ata8.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:16 p34 [ 58.450480] ata8.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:16 p34 [ 58.453526] ata8.00: configured for UDMA/100
May 29 17:39:16 p34 [ 58.454693] scsi 6:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:16 p34 [ 58.456666] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:16 p34 [ 58.456964] sdg: Write Protect is off
May 29 17:39:16 p34 [ 58.458045] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:16 p34 [ 58.458913] SCSI device sdg: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:16 p34 [ 58.459203] sdg: Write Protect is off
May 29 17:39:16 p34 [ 58.459754] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:16 p34 [ 58.459918] sdg:
May 29 17:39:16 p34 sdg1
May 29 17:39:16 p34
May 29 17:39:16 p34 [ 58.474199] sd 6:0:0:0: Attached scsi disk sdg
May 29 17:39:16 p34 [ 58.476416] scsi 7:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:16 p34 [ 58.478356] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:16 p34 [ 58.478711] sdh: Write Protect is off
May 29 17:39:16 p34 [ 58.479177] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:16 p34 [ 58.480075] SCSI device sdh: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:16 p34 [ 58.480402] sdh: Write Protect is off
May 29 17:39:16 p34 [ 58.480928] SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:16 p34 [ 58.481075] sdh:
May 29 17:39:16 p34 sdh1
May 29 17:39:16 p34
May 29 17:39:16 p34 [ 58.495586] sd 7:0:0:0: Attached scsi disk sdh
May 29 17:39:16 p34 [ 58.496786] ACPI: PCI Interrupt 0000:04:00.0[A] ->
May 29 17:39:16 p34 GSI 19 (level, low) -> IRQ 19
May 29 17:39:16 p34 [ 58.498258] ata9: SATA max UDMA/100 cmd 0xffffc20000110000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
May 29 17:39:16 p34 [ 58.499601] ata10: SATA max UDMA/100 cmd 0xffffc20000112000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
May 29 17:39:16 p34 [ 58.499831] scsi8 : sata_sil24
May 29 17:39:16 p34 [ 58.906766] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:16 p34 [ 58.908540] ata9.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:16 p34 [ 58.908698] ata9.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:16 p34 [ 58.911323] ata9.00: configured for UDMA/100
May 29 17:39:16 p34 [ 58.911545] scsi9 : sata_sil24
May 29 17:39:17 p34 [ 59.317958] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:17 p34 [ 59.319759] ata10.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:17 p34 [ 59.319892] ata10.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:17 p34 [ 59.322532] ata10.00: configured for UDMA/100
May 29 17:39:17 p34 [ 59.323739] scsi 8:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:17 p34 [ 59.325657] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:17 p34 [ 59.325964] sdi: Write Protect is off
May 29 17:39:17 p34 [ 59.326500] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:17 p34 [ 59.327388] SCSI device sdi: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:17 p34 [ 59.327707] sdi: Write Protect is off
May 29 17:39:17 p34 [ 59.328203] SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:17 p34 [ 59.328380] sdi:
May 29 17:39:17 p34 sdi1
May 29 17:39:17 p34
May 29 17:39:17 p34 [ 59.340639] sd 8:0:0:0: Attached scsi disk sdi
May 29 17:39:17 p34 [ 59.342775] scsi 9:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:17 p34 [ 59.344776] SCSI device sdj: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:17 p34 [ 59.345103] sdj: Write Protect is off
May 29 17:39:17 p34 [ 59.345608] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:17 p34 [ 59.346489] SCSI device sdj: 293046768 5
May 29 17:39:17 p34 12-byte hdwr sectors (150040 MB)
May 29 17:39:17 p34 [ 59.346850] sdj: Write Protect is off
May 29 17:39:17 p34 [ 59.347393] SCSI device sdj: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:17 p34 [ 59.347552] sdj:
May 29 17:39:17 p34 sdj1
May 29 17:39:17 p34
May 29 17:39:17 p34 [ 59.362148] sd 9:0:0:0: Attached scsi disk sdj
May 29 17:39:17 p34 [ 59.363387] ACPI: PCI Interrupt 0000:05:00.0[A] ->
May 29 17:39:17 p34 GSI 16 (level, low) -> IRQ 16
May 29 17:39:17 p34 [ 59.365179] ata11: SATA max UDMA/100 cmd 0xffffc20000118000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
May 29 17:39:17 p34 [ 59.367143] ata12: SATA max UDMA/100 cmd 0xffffc2000011a000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
May 29 17:39:17 p34 [ 59.367432] scsi10 : sata_sil24
May 29 17:39:17 p34 [ 59.775363] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:17 p34 [ 59.777435] ata11.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:17 p34 [ 59.777565] ata11.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:17 p34 [ 59.780599] ata11.00: configured for UDMA/100
May 29 17:39:17 p34 [ 59.780798] scsi11 : sata_sil24
May 29 17:39:18 p34 [ 60.187580] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 29 17:39:18 p34 [ 60.189625] ata12.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
May 29 17:39:18 p34 [ 60.189769] ata12.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
May 29 17:39:18 p34 [ 60.192796] ata12.00: configured for UDMA/100
May 29 17:39:18 p34 [ 60.193974] scsi 10:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:18 p34 [ 60.195832] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:18 p34 [ 60.196127] sdk: Write Protect is off
May 29 17:39:18 p34 [ 60.196614] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:18 p34 [ 60.197514] SCSI device sdk: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:18 p34 [ 60.197845] sdk: Write Protect is off
May 29 17:39:18 p34 [ 60.198333] SCSI device sdk: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:18 p34 [ 60.198507] sdk:
May 29 17:39:18 p34 sdk1
May 29 17:39:18 p34
May 29 17:39:18 p34 [ 60.212748] sd 10:0:0:0: Attached scsi disk sdk
May 29 17:39:18 p34 [ 60.214934] scsi 11:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
May 29 17:39:18 p34 [ 60.216923] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:18 p34 [ 60.217271] sdl: Write Protect is off
May 29 17:39:18 p34 [ 60.217774] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:18 p34 [ 60.218665] SCSI device sdl: 293046768 512-byte hdwr sectors (150040 MB)
May 29 17:39:18 p34 [ 60.218974] sdl: Write Protect is off
May 29 17:39:18 p34 [ 60.219497] SCSI device sdl: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 29 17:39:18 p34 [ 60.219671] sdl:
May 29 17:39:18 p34 sdl1
May 29 17:39:18 p34
May 29 17:39:18 p34 [ 60.234367] sd 11:0:0:0: Attached scsi disk sdl
May 29 17:39:18 p34 [ 60.236317] ACPI: PCI Interrupt 0000:02:00.0[A] ->
May 29 17:39:18 p34 GSI 17 (level, low) -> IRQ 17
May 29 17:39:18 p34 [ 60.237365] ata13: PATA max UDMA/100 cmd 0x0000000000015018 ctl 0x0000000000015026 bmdma 0x0000000000015000 irq 17
May 29 17:39:18 p34 [ 60.237631] scsi12 : pata_marvell
May 29 17:39:18 p34 [ 60.239266] BAR5:
May 29 17:39:18 p34 00:00
May 29 17:39:18 p34 01:7F
May 29 17:39:18 p34 02:22
May 29 17:39:18 p34 03:CA
May 29 17:39:18 p34 04:00
May 29 17:39:18 p34 05:00
May 29 17:39:18 p34 06:00
May 29 17:39:18 p34 07:00
May 29 17:39:18 p34 08:00
May 29 17:39:18 p34 09:00
May 29 17:39:18 p34 0A:00
May 29 17:39:18 p34 0B:00
May 29 17:39:18 p34 0C:01
May 29 17:39:18 p34 0D:00
May 29 17:39:18 p34 0E:00
May 29 17:39:18 p34 0F:00
May 29 17:39:18 p34
May 29 17:39:18 p34 [ 60.545828] ata13.00: ATAPI, max UDMA/33
May 29 17:39:18 p34 [ 60.701530] ata13.00: configured for UDMA/33
May 29 17:39:18 p34 [ 60.703942] scsi 12:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
May 29 17:39:18 p34 [ 60.711411] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
May 29 17:39:18 p34 [ 60.711545] Uniform CD-ROM driver Revision: 3.20
May 29 17:39:18 p34 [ 60.714694] ACPI: PCI Interrupt 0000:00:1a.7[C] ->
May 29 17:39:18 p34 GSI 18 (level, low) -> IRQ 18
May 29 17:39:18 p34 [ 60.715083] ehci_hcd 0000:00:1a.7: EHCI Host Controller
May 29 17:39:18 p34 [ 60.716069] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
May 29 17:39:18 p34 [ 60.716562] ehci_hcd 0000:00:1a.7: debug port 1
May 29 17:39:18 p34 [ 60.716810] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625c00
May 29 17:39:18 p34 [ 60.720814] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 29 17:39:18 p34 [ 60.723647] usb usb1: configuration #1 chosen from 1 choice
May 29 17:39:18 p34 [ 60.724706] hub 1-0:1.0: USB hub found
May 29 17:39:18 p34 [ 60.724901] hub 1-0:1.0: 4 ports detected
May 29 17:39:18 p34 [ 60.829165] ACPI: PCI Interrupt 0000:00:1d.7[A] ->
May 29 17:39:18 p34 GSI 23 (level, low) -> IRQ 23
May 29 17:39:18 p34 [ 60.829583] ehci_hcd 0000:00:1d.7: EHCI Host Controller
May 29 17:39:18 p34 [ 60.830451] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
May 29 17:39:18 p34 [ 60.830986] ehci_hcd 0000:00:1d.7: debug port 1
May 29 17:39:18 p34 [ 60.831229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0625800
May 29 17:39:18 p34 [ 60.835261] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
May 29 17:39:18 p34 [ 60.837971] usb usb2: configuration #1 chosen from 1 choice
May 29 17:39:18 p34 [ 60.839024] hub 2-0:1.0: USB hub found
May 29 17:39:18 p34 [ 60.839241] hub 2-0:1.0: 6 ports detected
May 29 17:39:19 p34 [ 60.942849] USB Universal Host Controller Interface driver v3.0
May 29 17:39:19 p34 [ 60.943912] ACPI: PCI Interrupt 0000:00:1a.0[A] ->
May 29 17:39:19 p34 GSI 16 (level, low) -> IRQ 16
May 29 17:39:19 p34 [ 60.944250] uhci_hcd 0000:00:1a.0: UHCI Host Controller
May 29 17:39:19 p34 [ 60.945081] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
May 29 17:39:19 p34 [ 60.945338] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
May 29 17:39:19 p34 [ 60.948562] usb usb3: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 60.949639] hub 3-0:1.0: USB hub found
May 29 17:39:19 p34 [ 60.949832] hub 3-0:1.0: 2 ports detected
May 29 17:39:19 p34 [ 61.053768] ACPI: PCI Interrupt 0000:00:1a.1[B] ->
May 29 17:39:19 p34 GSI 21 (level, low) -> IRQ 21
May 29 17:39:19 p34 [ 61.054098] uhci_hcd 0000:00:1a.1: UHCI Host Controller
May 29 17:39:19 p34 [ 61.054937] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
May 29 17:39:19 p34 [ 61.055187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
May 29 17:39:19 p34 [ 61.058179] usb usb4: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.059320] hub 4-0:1.0: USB hub found
May 29 17:39:19 p34 [ 61.059500] hub 4-0:1.0: 2 ports detected
May 29 17:39:19 p34 [ 61.162594] ACPI: PCI Interrupt 0000:00:1d.0[A] ->
May 29 17:39:19 p34 GSI 23 (level, low) -> IRQ 23
May 29 17:39:19 p34 [ 61.162944] uhci_hcd 0000:00:1d.0: UHCI Host Controller
May 29 17:39:19 p34 [ 61.163751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
May 29 17:39:19 p34 [ 61.164039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
May 29 17:39:19 p34 [ 61.166996] usb usb5: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.168132] hub 5-0:1.0: USB hub found
May 29 17:39:19 p34 [ 61.168320] hub 5-0:1.0: 2 ports detected
May 29 17:39:19 p34 [ 61.271253] ACPI: PCI Interrupt 0000:00:1d.1[B] ->
May 29 17:39:19 p34 GSI 19 (level, low) -> IRQ 19
May 29 17:39:19 p34 [ 61.271587] uhci_hcd 0000:00:1d.1: UHCI Host Controller
May 29 17:39:19 p34 [ 61.272501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
May 29 17:39:19 p34 [ 61.272757] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
May 29 17:39:19 p34 [ 61.275754] usb usb6: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.276869] hub 6-0:1.0: USB hub found
May 29 17:39:19 p34 [ 61.277042] hub 6-0:1.0: 2 ports detected
May 29 17:39:19 p34 [ 61.379999] ACPI: PCI Interrupt 0000:00:1d.2[C] ->
May 29 17:39:19 p34 GSI 18 (level, low) -> IRQ 18
May 29 17:39:19 p34 [ 61.380331] uhci_hcd 0000:00:1d.2: UHCI Host Controller
May 29 17:39:19 p34 [ 61.381211] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
May 29 17:39:19 p34 [ 61.381464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
May 29 17:39:19 p34 [ 61.385027] usb usb7: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.386139] hub 7-0:1.0: USB hub found
May 29 17:39:19 p34 [ 61.386313] hub 7-0:1.0: 2 ports detected
May 29 17:39:19 p34 [ 61.477697] usb 5-1: new low speed USB device using uhci_hcd and address 2
May 29 17:39:19 p34 [ 61.489915] Initializing USB Mass Storage driver...
May 29 17:39:19 p34 [ 61.641966] usb 5-1: configuration #1 chosen from 1 choice
May 29 17:39:19 p34 [ 61.647974] usbcore: registered new interface driver usb-storage
May 29 17:39:19 p34 [ 61.648124] USB Mass Storage support registered.
May 29 17:39:19 p34 [ 61.649681] usbcore: registered new interface driver hiddev
May 29 17:39:20 p34 [ 62.146211]
May 29 17:39:20 p34 hiddev96
May 29 17:39:20 p34 : USB HID v1.00 Device [ UPS] on usb-0000:00:1d.0-1
May 29 17:39:20 p34 [ 62.146611] usbcore: registered new interface driver usbhid
May 29 17:39:20 p34 [ 62.146747] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May 29 17:39:20 p34 [ 62.148329] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
May 29 17:39:20 p34 [ 62.152574] serio: i8042 KBD port at 0x60,0x64 irq 1
May 29 17:39:20 p34 [ 62.152739] serio: i8042 AUX port at 0x60,0x64 irq 12
May 29 17:39:20 p34 [ 62.153709] mice: PS/2 mouse device common for all mice
May 29 17:39:20 p34 [ 62.157353] input: PC Speaker as /class/input/input0
May 29 17:39:20 p34 [ 62.157569] i2c /dev entries driver
May 29 17:39:20 p34 [ 62.158424] md: raid1 personality registered for level 1
May 29 17:39:20 p34 [ 62.174745] raid6: int64x1 62 MB/s
May 29 17:39:20 p34 [ 62.178692] input: AT Translated Set 2 keyboard as /class/input/input1
May 29 17:39:20 p34 [ 62.192019] raid6: int64x2 89 MB/s
May 29 17:39:20 p34 [ 62.209023] raid6: int64x4 31 MB/s
May 29 17:39:20 p34 [ 62.225777] raid6: int64x8 11 MB/s
May 29 17:39:20 p34 [ 62.242854] raid6: sse2x1 148 MB/s
May 29 17:39:20 p34 [ 62.259636] raid6: sse2x2 269 MB/s
May 29 17:39:20 p34 [ 62.276650] raid6: sse2x4 460 MB/s
May 29 17:39:20 p34 [ 62.276789] raid6: using algorithm sse2x4 (460 MB/s)
May 29 17:39:20 p34 [ 62.276937] md: raid6 personality registered for level 6
May 29 17:39:20 p34 [ 62.277053] md: raid5 personality registered for level 5
May 29 17:39:20 p34 [ 62.277191] md: raid4 personality registered for level 4
May 29 17:39:20 p34 [ 62.277346] raid5: automatically using best checksumming function: generic_sse
May 29 17:39:20 p34 [ 62.281657] generic_sse: 56.000 MB/sec
May 29 17:39:20 p34 [ 62.281777] raid5: using function: generic_sse (56.000 MB/sec)
May 29 17:39:20 p34 [ 62.282244] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
May 29 17:39:20 p34 [ 62.288220] ACPI: PCI Interrupt 0000:00:1b.0[A] ->
May 29 17:39:20 p34 GSI 22 (level, low) -> IRQ 22
May 29 17:39:20 p34 [ 62.839554] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
May 29 17:39:21 p34 [ 63.412487] hda_intel: azx_get_response timeout, switching to polling mode...
May 29 17:39:21 p34 [ 63.435772] ALSA device list:
May 29 17:39:21 p34 [ 63.435876] #0: HDA Intel at 0xe0620000 irq 22
May 29 17:39:21 p34 [ 63.436031] u32 classifier
May 29 17:39:21 p34 [ 63.436148] Actions configured
May 29 17:39:21 p34 [ 63.436279] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
May 29 17:39:21 p34 [ 63.438882] ip_tables: (C) 2000-2006 Netfilter Core Team
May 29 17:39:21 p34 [ 63.439995] TCP cubic registered
May 29 17:39:21 p34 [ 63.440386] NET: Registered protocol family 1
May 29 17:39:21 p34 [ 63.440507] NET: Registered protocol family 17
May 29 17:39:21 p34 [ 63.445397] md: Autodetecting RAID arrays.
May 29 17:39:21 p34 [ 63.572955] md: autorun ...
May 29 17:39:21 p34 [ 63.573095] md: considering sdl1 ...
May 29 17:39:21 p34 [ 63.573596] md: adding sdl1 ...
May 29 17:39:21 p34 [ 63.573924] md: adding sdk1 ...
May 29 17:39:21 p34 [ 63.574312] md: adding sdj1 ...
May 29 17:39:21 p34 [ 63.574664] md: adding sdi1 ...
May 29 17:39:21 p34 [ 63.575005] md: adding sdh1 ...
May 29 17:39:21 p34 [ 63.575396] md: adding sdg1 ...
May 29 17:39:21 p34 [ 63.575754] md: adding sdf1 ...
May 29 17:39:21 p34 [ 63.576089] md: adding sde1 ...
May 29 17:39:21 p34 [ 63.576472] md: adding sdd1 ...
May 29 17:39:21 p34 [ 63.576824] md: adding sdc1 ...
May 29 17:39:21 p34 [ 63.577015] md: sdb3 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.577204] md: sdb2 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.577446] md: sdb1 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.577647] md: sda3 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.577846] md: sda2 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.578043] md: sda1 has different UUID to sdl1
May 29 17:39:21 p34 [ 63.579527] md: created md3
May 29 17:39:21 p34 [ 63.579639] md: bind<sdc1>
May 29 17:39:21 p34 [ 63.579956] md: bind<sdd1>
May 29 17:39:21 p34 [ 63.580329] md: bind<sde1>
May 29 17:39:21 p34 [ 63.580627] md: bind<sdf1>
May 29 17:39:21 p34 [ 63.580933] md: bind<sdg1>
May 29 17:39:21 p34 [ 63.581229] md: bind<sdh1>
May 29 17:39:21 p34 [ 63.581624] md: bind<sdi1>
May 29 17:39:21 p34 [ 63.582103] md: bind<sdj1>
May 29 17:39:21 p34 [ 63.582436] md: bind<sdk1>
May 29 17:39:21 p34 [ 63.582776] md: bind<sdl1>
May 29 17:39:21 p34 [ 63.583100] md: running:
May 29 17:39:21 p34
May 29 17:39:21 p34 [ 63.586384] raid5: device sdl1 operational as raid disk 2
May 29 17:39:21 p34 [ 63.586509] raid5: device sdk1 operational as raid disk 3
May 29 17:39:21 p34 [ 63.586656] raid5: device sdj1 operational as raid disk 0
May 29 17:39:21 p34 [ 63.586829] raid5: device sdi1 operational as raid disk 1
May 29 17:39:21 p34 [ 63.586973] raid5: device sdh1 operational as raid disk 6
May 29 17:39:21 p34 [ 63.587122] raid5: device sdg1 operational as raid disk 5
May 29 17:39:21 p34 [ 63.587317] raid5: device sdf1 operational as raid disk 4
May 29 17:39:21 p34 [ 63.587459] raid5: device sde1 operational as raid disk 7
May 29 17:39:21 p34 [ 63.587603] raid5: device sdd1 operational as raid disk 8
May 29 17:39:21 p34 [ 63.587758] raid5: device sdc1 operational as raid disk 9
May 29 17:39:21 p34 [ 63.608186] raid5: allocated 10562kB for md3
May 29 17:39:21 p34 [ 63.608334] raid5: raid level 5 set md3 active with 10 out of 10 devices, algorithm 2
May 29 17:39:21 p34 [ 63.608519] RAID5 conf printout:
May 29 17:39:21 p34 [ 63.608639] --- rd:10 wd:10
May 29 17:39:21 p34 [ 63.608767] disk 0, o:1, dev:sdj1
May 29 17:39:21 p34 [ 63.608897] disk 1, o:1, dev:sdi1
May 29 17:39:21 p34 [ 63.609073] disk 2, o:1, dev:sdl1
May 29 17:39:21 p34 [ 63.609184] disk 3, o:1, dev:sdk1
May 29 17:39:21 p34 [ 63.609346] disk 4, o:1, dev:sdf1
May 29 17:39:21 p34 [ 63.609507] disk 5, o:1, dev:sdg1
May 29 17:39:21 p34 [ 63.609640] disk 6, o:1, dev:sdh1
May 29 17:39:21 p34 [ 63.609771] disk 7, o:1, dev:sde1
May 29 17:39:21 p34 [ 63.609903] disk 8, o:1, dev:sdd1
May 29 17:39:21 p34 [ 63.610040] disk 9, o:1, dev:sdc1
May 29 17:39:21 p34 [ 63.612460] md: considering sdb3 ...
May 29 17:39:21 p34 [ 63.612835] md: adding sdb3 ...
May 29 17:39:21 p34 [ 63.613027] md: sdb2 has different UUID to sdb3
May 29 17:39:21 p34 [ 63.613220] md: sdb1 has different UUID to sdb3
May 29 17:39:21 p34 [ 63.613589] md: adding sda3 ...
May 29 17:39:21 p34 [ 63.613801] md: sda2 has different UUID to sdb3
May 29 17:39:21 p34 [ 63.613997] md: sda1 has different UUID to sdb3
May 29 17:39:21 p34 [ 63.615606] md: created md2
May 29 17:39:21 p34 [ 63.615720] md: bind<sda3>
May 29 17:39:21 p34 [ 63.616094] md: bind<sdb3>
May 29 17:39:21 p34 [ 63.616575] md: running:
May 29 17:39:21 p34
May 29 17:39:21 p34 [ 63.619316] raid1: raid set md2 active with 2 out of 2 mirrors
May 29 17:39:21 p34 [ 63.620513] md: considering sdb2 ...
May 29 17:39:21 p34 [ 63.620870] md: adding sdb2 ...
May 29 17:39:21 p34 [ 63.621082] md: sdb1 has different UUID to sdb2
May 29 17:39:21 p34 [ 63.621465] md: adding sda2 ...
May 29 17:39:21 p34 [ 63.621646] md: sda1 has different UUID to sdb2
May 29 17:39:21 p34 [ 63.623619] md: created md1
May 29 17:39:21 p34 [ 63.623733] md: bind<sda2>
May 29 17:39:21 p34 [ 63.624059] md: bind<sdb2>
May 29 17:39:21 p34 [ 63.624439] md: running:
May 29 17:39:21 p34
May 29 17:39:21 p34 [ 63.627438] raid1: raid set md1 active with 2 out of 2 mirrors
May 29 17:39:21 p34 [ 63.628555] md: considering sdb1 ...
May 29 17:39:21 p34 [ 63.628883] md: adding sdb1 ...
May 29 17:39:21 p34 [ 63.629302] md: adding sda1 ...
May 29 17:39:21 p34 [ 63.629411] md: created md0
May 29 17:39:21 p34 [ 63.629576] md: bind<sda1>
May 29 17:39:21 p34 [ 63.629882] md: bind<sdb1>
May 29 17:39:21 p34 [ 63.630233] md: running:
May 29 17:39:21 p34
May 29 17:39:21 p34 [ 63.633438] raid1: raid set md0 active with 2 out of 2 mirrors
May 29 17:39:21 p34 [ 63.634598] md: ... autorun DONE.
May 29 17:39:21 p34 [ 63.695456] UDF-fs: No VRS found
May 29 17:39:21 p34 [ 63.699158] Filesystem "md2": Disabling barriers, not supported by the underlying device
May 29 17:39:21 p34 [ 63.713776] XFS mounting filesystem md2
May 29 17:39:21 p34 [ 63.813743] VFS: Mounted root (xfs filesystem) readonly.
May 29 17:39:21 p34 [ 63.814115] Freeing unused kernel memory: 220k freed
May 29 17:40:39 p34 [ 141.447304] Adding 16787768k swap on /dev/md0. Priority:-1 extents:1 across:16787768k
May 29 17:40:40 p34 [ 142.497721] Filesystem "md2": Disabling barriers, not supported by the underlying device
May 29 17:41:04 p34 [ 166.716017] kjournald starting. Commit interval 5 seconds
May 29 17:41:04 p34 [ 166.729375] EXT3 FS on md1,
May 29 17:41:04 p34 internal journal
May 29 17:41:04 p34 [ 166.729663] EXT3-fs: mounted filesystem with ordered data mode.
May 29 17:41:04 p34 [ 166.751799] Filesystem "md3": Disabling barriers, not supported by the underlying device
May 29 17:41:04 p34 [ 166.758717] XFS mounting filesystem md3
May 29 17:41:54 p34 [ 216.821357] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
May 29 17:42:29 p34 [ 251.481399] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
May 29 17:46:42 p34 [ 504.074171] mtrr: no more MTRRs available
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
