Re: PCIE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Roland Dreier wrote:
>>> Uncompressing Linux .. Ok, booting the kernel.
>>> BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
>>> PCI: Failed to allocate mem resource #6:20000@30000000 for 0000:01:00.0
> 
> This message is about device 01:00.0 as it says (your nvidia video
> card based on later lspci output).
> 
>  > The device is a new DTV bridge from NXP (SAA7162E) with a PCIe interface.
>  > 
>  > 06:00.0 Multimedia controller: Philips Semiconductors Unknown device
>  > 7162 (rev 01)
>  >         Subsystem: Twinhan Technology Co. Ltd Unknown device 0027
> 
> This is device 06:00.0, so it's not related to that earlier message at
> all.  You didn't say what problem you're having with your driver for
> this device... 


If i uncomment the saa716x_read or write, what i get is a solid freeze
on module load. If i leave it commented out, the module loads fine.

static irqreturn_t saa716x_pcie_irq(int irq, void *dev_id)
{
	struct saa716x *saa716x;
	u32 stat, mask;

	if (unlikely((saa716x = (struct saa716x *) dev_id) == NULL)) {
		printk(KERN_ERR "%s: Aeie NULL ptr\n", __func__);
		return IRQ_NONE;
	}
//	stat = saa716x_read(0x500);
	dprintk(verbose, SAA716x_DEBUG, 0, "=== Interrupts[%04x] [", stat);

	dprintk(verbose, SAA716x_DEBUG, 0, "] ==\n");

	return IRQ_HANDLED;
}

int saa716x_pcie_init(struct saa716x *saa716x)
{
	struct pci_dev *pdev = saa716x->pdev;
	int err = 0;
	u8 latency, revision;

	printk(KERN_INFO "%s: found a %s device\n", __func__,
saa716x->hwconfig->model_name);
	pci_set_drvdata(pdev, saa716x);

	if ((err = pci_enable_device(pdev)) != 0) {
		printk(KERN_ERR "%s ERROR: pci enable failed (%i)\n", __func__, err);
		goto fail0;
	}
	if (request_mem_region(pci_resource_start(pdev, 0),
			       pci_resource_len(pdev, 0), DRIVER_NAME) == NULL) {

		printk(KERN_ERR "%s ERROR: mem region request failed\n", __func__);
		err = -ENOMEM;
		goto fail1;
	}

	saa716x->mmio = ioremap(pci_resource_start(pdev, 0), 0x1000); // FIXME:
check this size

	if ((err = request_irq(pdev->irq, saa716x_pcie_irq, IRQF_SHARED |
IRQF_DISABLED,
			       DRIVER_NAME, (void *) saa716x)) != 0) {
		printk(KERN_ERR "%s ERROR: irq request failed (%i)\n", err, __func__);
		goto fail2;
	}
	pci_set_master(pdev);
	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);

	dprintk(verbose, SAA716x_ERROR, 0, "     SAA7160/1/2 Rev %d [%04x:%04x], ",
		revision,
		saa716x->pdev->subsystem_vendor, saa716x->pdev->subsystem_device);

	dprintk(verbose, SAA716x_ERROR, 0,
		"irq: %d, latency: %d\n     memory: 0x%04x, mmio: 0x%p\n",
		saa716x->pdev->irq, latency, pci_resource_start(pdev, 0), saa716x->mmio);

	saa716x->verbose = verbose;
//	init_waitqueue_head(&saa716x->i2c_queue);
	/* Disable all interrupts here */
//	saa716x_write(0, 0x500);
	return 0;

fail2:
	iounmap(saa716x->mmio);
	release_mem_region(pci_resource_start(saa716x->pdev, 0),
			   pci_resource_len(saa716x->pdev, 0));
fail1:
	pci_disable_device(pdev);
fail0:
	pci_set_drvdata(pdev, NULL);
	return err;
}
EXPORT_SYMBOL_GPL(saa716x_pcie_init);



> but all standard PCI stuff should work fine for PCIe
> devices -- the normal PCI driver stuff is all you should need for
> everything but exotic cases.

That part is then fine. Does MSI require any special tinkering ?


Thanks,
Manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux