[PATCH] serial: set RTS and DTR if flow is 'r' --- resend

[Yinghai Lu <Yinghai.Lu@Sun.COM>]

[PATCH] serial: set RTS and DTR if flow is 'r'

if the serial console flow is set to 'r', We need to set RTS and DTR.
Some UARTs on other side need these bit set, otherwise will not send 
char to or
receive char from the host that kernel is runing esp for kernel boot stage.

BTW:
earlyprintk and early_uart are hard coded to set DTR/RTS.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 48e259a..4e6f8be 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2154,6 +2154,15 @@ serial8250_set_termios(struct uart_port *port, 
struct ktermios *termios,
}
serial_outp(up, UART_FCR, fcr); /* set fcr */
}
+
+ /* if serial console flow is 'r', we need to set RTS and DTR to MCR.
+ * some uarts on other side don't support no flow control. So we state
+ * console=ttyS0,9600n8r in kernel command line to make those uart can
+ * work.
+ */
+ if (termios->c_cflag & CRTSCTS)
+ up->port.mctrl |= TIOCM_RTS | TIOCM_DTR;
+
serial8250_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/