Applied,
and thanks for turning over the rocks in sysfs to see what wiggled out:-)
thanks,
-Len
On Tuesday 03 April 2007 20:41, David Brownell wrote:
> This updates /proc/acpi/wakeup to be more informative, primarily by showing
> the sysfs node associated with each wakeup-enabled device. Example:
>
> Device S-state Status Sysfs node
> PCI0 S4 disabled no-bus:pci0000:00
> PS2M S4 disabled pnp:00:05
> PS2K S4 disabled pnp:00:06
> UAR1 S4 disabled pnp:00:08
> USB1 S3 disabled pci:0000:00:03.0
> USB2 S3 disabled pci:0000:00:03.1
> USB3 S3 disabled
> USB4 S3 disabled pci:0000:00:03.3
> S139 S4 disabled
> LAN S4 disabled pci:0000:00:04.0
> MDM S4 disabled
> AUD S4 disabled pci:0000:00:02.7
> SLPB S4 *enabled
>
> Eventually this file should be removed, but until then it's almost the only
> way we have to tell how the relevant ACPI tables are broken (and cope). In
> that example, two devices don't actually exist (USB3, S139), one can't issue
> wakeup events (PCI0), and two seem harmlessly (?) confused (MDM and AUD are
> the same PCI device, but it's the _modem_ that does wake-on-ring).
>
> In particular, we need to be sure driver model nodes are properly hooked
> up before we can get rid of this ACPI-only interface for wakeup events.
>
> Signed-off-by: David Brownell <[email protected]>
>
> --- g26.orig/drivers/acpi/sleep/proc.c 2007-04-03 16:27:22.000000000 -0700
> +++ g26/drivers/acpi/sleep/proc.c 2007-04-03 16:43:26.000000000 -0700
> @@ -360,21 +360,31 @@ acpi_system_wakeup_device_seq_show(struc
> {
> struct list_head *node, *next;
>
> - seq_printf(seq, "Device Sleep state Status\n");
> + seq_printf(seq, "Device\tS-state\t Status Sysfs node\n");
>
> spin_lock(&acpi_device_lock);
> list_for_each_safe(node, next, &acpi_wakeup_device_list) {
> struct acpi_device *dev =
> container_of(node, struct acpi_device, wakeup_list);
> + struct device *ldev;
>
> if (!dev->wakeup.flags.valid)
> continue;
> spin_unlock(&acpi_device_lock);
> - seq_printf(seq, "%4s %4d %s%8s\n",
> +
> + ldev = acpi_get_physical_device(dev->handle);
> + seq_printf(seq, "%s\t S%d\t%c%-8s ",
> dev->pnp.bus_id,
> (u32) dev->wakeup.sleep_state,
> - dev->wakeup.flags.run_wake ? "*" : "",
> + dev->wakeup.flags.run_wake ? '*' : ' ',
> dev->wakeup.state.enabled ? "enabled" : "disabled");
> + if (ldev)
> + seq_printf(seq, "%s:%s",
> + ldev->bus ? ldev->bus->name : "no-bus",
> + ldev->bus_id);
> + seq_printf(seq, "\n");
> + put_device(ldev);
> +
> spin_lock(&acpi_device_lock);
> }
> spin_unlock(&acpi_device_lock);
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
