Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter

Karsten Vieth wrote:

I can't report this problem from a new kernel, but i have the same
problem with the kernel 2.6.20.1-33x from f7-test3.

I managed to boot with these options:
linux noapic acpi=off pci=nomsi irqpoll

Can you narrow down the options?

Hopefully pci=nomsi or similar should do it.

irqpoll in particular is heavyweight and to be avoided if possible.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

---

• References:
  • Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
    • From: Karsten Vieth <[email protected]>

• Prev by Date: Re: [ANNOUNCE][PATCH] Kcli - Kernel command line interface.
• Next by Date: Re: [PATCH] Return EPERM not ECHILD on security_task_wait failure
• Previous by thread: Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
• Next by thread: [RFC] another scheduler beater
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]