Re: via irq quirk breakage

[Jean Delvare <jdelvare@suse.de>]

Hi Nick,

Thanks for testing and reporting.

Le Mardi 30 Janvier 2007 03:35, Nick Piggin a écrit :
> Jean Delvare wrote:
> > Here is the patch I have come up with. It might not qualify as elegant,
> > but at least it appears to solve the issue. Nick, can you please give it
> > a try and confirm it works for you as well?
>
> This does not work for me. Again, it boots and runs, but USB interrupts
> don't seem to be getting delivered. Attached is the dmesg. Let me know
> if you need any other info or tests done.

You have an old VT82C686 south bridge, which was tagged as "special" by
Alan. For this chip, Alan's code only allows devices 00:00.x to be quirked.
As my code was merely a reimplementation of Alan's idea, it does the same.
Your USB controllers are at 00:07.x, so I'm not surprised they weren't
quirked.

Alan, why were dev_lo and dev_hi both set to 0 for the VT82C868 in your
implementation? Is it a typo, or...?

Nick, I guess the following patch would work better for you? I've listed
devices 00:07.x as quirkable for the VT82C686.

* * * * *

Fix VIA quirks that were recently broken by Alan Cox in the upstream
kernel (commit 1597cacbe39802d86656d1f2e6329895bd2ef531).

My understanding is that pci_find_present() doesn't work yet at the
time the quirks are run. So I used a two-step quirk as is done for
some other quirks already. First we detect the VIA south bridges
and set the right low and high device limits, then we are ready to
actually run the quirks on the affected devices.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
---
 drivers/pci/quirks.c |   78 ++++++++++++++++++++++++++------------------------
 1 files changed, 42 insertions(+), 36 deletions(-)

--- linux-2.6.20-rc6.orig/drivers/pci/quirks.c	2007-01-26 09:08:14.000000000 +0100
+++ linux-2.6.20-rc6/drivers/pci/quirks.c	2007-01-29 15:33:30.000000000 +0100
@@ -654,19 +654,40 @@
  *	VIA bridges which have VLink
  */
 
-static const struct pci_device_id via_vlink_fixup_tbl[] = {
-	/* Internal devices need IRQ line routing, pre VLink */
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686), 0 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8231), 17 },
-	/* Devices with VLink */
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
-	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
-	{ 0, },
-};
+static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
+
+static void quirk_via_bridge(struct pci_dev *dev)
+{
+	/* See what bridge we have and find the device ranges */
+	switch (dev->device) {
+	case PCI_DEVICE_ID_VIA_82C686:
+		/* 82C686 is special */
+		via_vlink_dev_lo = 7;
+		via_vlink_dev_hi = 7;
+		break;
+	case PCI_DEVICE_ID_VIA_8237:
+	case PCI_DEVICE_ID_VIA_8237A:
+		via_vlink_dev_lo = 15;
+		break;
+	case PCI_DEVICE_ID_VIA_8235:
+		via_vlink_dev_lo = 16;
+		break;
+	case PCI_DEVICE_ID_VIA_8231:
+	case PCI_DEVICE_ID_VIA_8233_0:
+	case PCI_DEVICE_ID_VIA_8233A:
+	case PCI_DEVICE_ID_VIA_8233C_0:
+		via_vlink_dev_lo = 17;
+		break;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686,	quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8231,		quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8233_0,	quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8233A,	quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8233C_0,	quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,		quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237,		quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237A,	quirk_via_bridge);
 
 /**
  *	quirk_via_vlink		-	VIA VLink IRQ number update
@@ -675,35 +696,20 @@
  *	If the device we are dealing with is on a PIC IRQ we need to
  *	ensure that the IRQ line register which usually is not relevant
  *	for PCI cards, is actually written so that interrupts get sent
- *	to the right place
+ *	to the right place.
+ *	We only do this on systems where a VIA south bridge was detected,
+ *	and only for VIA devices on the motherboard (see quirk_via_bridge
+ *	above).
  */
 
 static void quirk_via_vlink(struct pci_dev *dev)
 {
-	const struct pci_device_id *via_vlink_fixup;
-	static int dev_lo = -1, dev_hi = 18;
 	u8 irq, new_irq;
 
-	/* Check if we have VLink and cache the result */
-
-	/* Checked already - no */
-	if (dev_lo == -2)
+	/* Check if we have VLink at all */
+	if (via_vlink_dev_lo == -1)
 		return;
 
-	/* Not checked - see what bridge we have and find the device
-	   ranges */
-
-	if (dev_lo == -1) {
-		via_vlink_fixup = pci_find_present(via_vlink_fixup_tbl);
-		if (via_vlink_fixup == NULL) {
-			dev_lo = -2;
-			return;
-		}
-		dev_lo = via_vlink_fixup->driver_data;
-		/* 82C686 is special - 0/0 */
-		if (dev_lo == 0)
-			dev_hi = 0;
-	}
 	new_irq = dev->irq;
 
 	/* Don't quirk interrupts outside the legacy IRQ range */
@@ -711,8 +717,8 @@
 		return;
 
 	/* Internal device ? */
-	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > dev_hi ||
-		PCI_SLOT(dev->devfn) < dev_lo)
+	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
+	    PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
 		return;
 
 	/* This is an internal VLink device on a PIC interrupt. The BIOS


-- 
Jean Delvare
Suse L3
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/