>>>>> "Tony" == Tony Foiani <[email protected]> writes:
Tony> How fast is your Ethernet port? 100Mbps or 95.37Mbps?
>>>>> "Jan" == Jan Engelhardt <[email protected]> writes:
Jan> Same lie like with harddrives. It's around 80, not 100. But it
Jan> depends on how you look at it. 80 for Layer3, possibly a little
Jan> more for Layer2/1.
No, it's not the same lie. The physical media -- as presented to the
next higher layer -- really has 100Mbps capability. Likewise, the
"physical media" of a hard drive (as seen outside the controller on
the disk) really is 500GB/465GiB (or whatever). [1]
The overhead caused by Ethernet frames (level 2) and then IP packets
(level 3) and then TCP or UDP (level 4) are more closely related to
the losses you get on filesystem overhead (superblock, inodes,
directories) and "slack" in block-allocated systems (having to round
sizes up to the next 512 or whatever). [2]
The problem is that a drive labelled "500GB" on its packaging is
displayed as "465GB" on the computer. The fix is to have the computer
display either "500GB" or "465GiB".
t.
[1] SFAIK, what's really on hard drive platters anymore is something
much closer to "symbols", not just 1s and 0s. In the same way
that "baud" is "symbols per second", the actual thingies on the
platters are symbols, and it's up to the drive electronics to make
sense of them.
[2] Level numbers from: http://en.wikipedia.org/wiki/TCP/IP_model
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
