Re: [PATCH 2/3] atiixp.c: sb600 ide only has one channel

["Conke Hu" <conke.hu@gmail.com>]

On 1/7/07, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
> On 1/6/07, Conke Hu <conke.hu@gmail.com> wrote:
> > AMD/ATI SB600 IDE/PATA controller only has one channel.
> >
> > Signed-off-by: Conke Hu <conke.hu@amd.com>
>
> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>
> [ but the patch is line wrapped ]

Hi Bart,
   Thank you!
   I've re-created the patch based on 2.6.20-rc4, pls see below.
   I've sent out 3 patches for the same file atiixp.c, pls apply it
after the [patch 1/3] :)
-------------------
--- linux-2.6.20-rc4/drivers/ide/pci/atiixp.c.2	2007-01-09
15:21:29.000000000 +0800
+++ linux-2.6.20-rc4/drivers/ide/pci/atiixp.c	2007-01-09
15:25:15.000000000 +0800
@@ -328,7 +328,14 @@ static ide_pci_device_t atiixp_pci_info[
		.autodma	= AUTODMA,
		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
		.bootable	= ON_BOARD,
-	},
+	},{	/* 1 */
+		.name		= "SB600_PATA",
+		.init_hwif	= init_hwif_atiixp,
+		.channels	= 1,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
+ 		.bootable	= ON_BOARD,
+ 	},
};

/**
@@ -349,7 +356,7 @@ static struct pci_device_id atiixp_pci_t
	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 1},
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/