[PATCH 3/3] atiixp.c: add cable detection support for ATI IDE

["Conke Hu" <conke.hu@gmail.com>]

IDE HDD does not work if it uses a 40-pin PATA cable on ATI chipset.
This patch fixes the bug.

Signed-off-by: Conke Hu <conke.hu@amd.com>
-----------------------
--- linux-2.6.20-rc3-git4/drivers/ide/pci/atiixp.c.2	2007-01-06
19:19:35.000000000 +0800
+++ linux-2.6.20-rc3-git4/drivers/ide/pci/atiixp.c	2007-01-06
19:22:34.000000000 +0800
@@ -289,8 +289,12 @@ fast_ata_pio:

static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
+	u8 udma_mode = 0;
+	u8 ch = hwif->channel;
+	struct pci_dev *pdev = hwif->pci_dev;
+
	if (!hwif->irq)
-		hwif->irq = hwif->channel ? 15 : 14;
+		hwif->irq = ch ? 15 : 14;

	hwif->autodma = 0;
	hwif->tuneproc = &atiixp_tuneproc;
@@ -306,8 +310,12 @@ static void __devinit init_hwif_atiixp(i
	hwif->mwdma_mask = 0x06;
	hwif->swdma_mask = 0x04;

-	/* FIXME: proper cable detection needed */
-	hwif->udma_four = 1;
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+	if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+		hwif->udma_four = 1;
+	else
+		hwif->udma_four = 0;
+
	hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
	hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
	hwif->ide_dma_check = &atiixp_dma_check;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/