Re: libata and sata?

[John Richard Moser <nigelenki@comcast.net>]

Alan wrote:
>> I no longer have two kernels to test through; I can't tell if the speed
>> is back or not.  Nothing in dmesg tells me if SATA is using DMA or
>> 32-bit IO support though, so I don't know... lack of knowledge over here
>> is killing me for troubleshooting this on my own.
> 
> The dmesg message shows the mode selected. It should be the highest speed
> but in one or two cases it selects UDMA33 only. I've fixed one of those
> caused by us relying on a bit not defined in older controllers. We've
> still got a case in the newer chips where BIOS setup doesn't set the
> flags properly. Old IDE has a hackish workaround for that and I'll
> probably end up porting it over.
> 
> 

It seems the highest speed here is UDMA/133.  That should be right...

I've let this go for now; except someone just brought up that copying
from one SATA drive to another slows Ubuntu to a crawl (which is what
I'm using, hence my dmesg should be relevant).  On my end I'm not
noticing; VLC used to hang the system horribly while trying to read like
20M videos (hard disk light on the whole time), now it behaves.


[   25.411977] sata_via 0000:00:0f.0: version 2.0
[   25.411992] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI
20 (level, low) -> IRQ 18
[   25.412004] sata_via 0000:00:0f.0: routed to hard irq line 11
[   25.412057] ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9802 bmdma
0xA400 irq 18
[   25.412363] ata4: SATA max UDMA/133 cmd 0x9C00 ctl 0xA002 bmdma
0xA408 irq 18
[   25.412380] scsi2 : sata_via
[   25.415286] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   25.598514] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0000000000000000]
[   25.613389] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   25.738290] usb 2-1: device not accepting address 2, error -71
[   25.764951] ata3.00: ATA-7, max UDMA/133, 240121728 sectors: LBA
[   25.764954] ata3.00: ata3: dev 0 multi count 16
[   25.765730] ata3.00: configured for UDMA/133
[   25.765741] scsi3 : sata_via
[   25.967113] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   25.977712] ATA: abnormal status 0x7F on port 0x9C07
[   25.977852] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0
 YAR5 PQ: 0 ANSI: 5

-- 
    We will enslave their women, eat their children and rape their
    cattle!
                  -- Bosc, Evil alien overlord from the fifth dimension
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/