Okay, thanks.
Best regards
Luca Risolia
Scrive Ralf Baechle <[email protected]>:
> Both use __SC. Since __* is sort of private namespace I've choosen to
> fix this in the driver. For consistency I decieded to also change
> __UNSC to UNSC.
>
> Signed-off-by: Ralf Baechle <[email protected]>
>
> diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
> index ddce2fb..9f403af 100644
> --- a/drivers/media/video/w9968cf.c
> +++ b/drivers/media/video/w9968cf.c
> @@ -1827,8 +1827,8 @@ w9968cf_set_window(struct w9968cf_device
> int err = 0;
>
> /* Work around to avoid FP arithmetics */
> - #define __SC(x) ((x) << 10)
> - #define __UNSC(x) ((x) >> 10)
> + #define SC(x) ((x) << 10)
> + #define UNSC(x) ((x) >> 10)
>
> /* Make sure we are using a supported resolution */
> if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
> @@ -1836,15 +1836,15 @@ w9968cf_set_window(struct w9968cf_device
> goto error;
>
> /* Scaling factors */
> - fw = __SC(win.width) / cam->maxwidth;
> - fh = __SC(win.height) / cam->maxheight;
> + fw = SC(win.width) / cam->maxwidth;
> + fh = SC(win.height) / cam->maxheight;
>
> /* Set up the width and height values used by the chip */
> if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
> cam->vpp_flag |= VPP_UPSCALE;
> /* Calculate largest w,h mantaining the same w/h ratio */
> - w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
> - h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
> + w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
> + h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
> if (w < cam->minwidth) /* just in case */
> w = cam->minwidth;
> if (h < cam->minheight) /* just in case */
> @@ -1861,8 +1861,8 @@ w9968cf_set_window(struct w9968cf_device
>
> /* Calculate cropped area manteining the right w/h ratio */
> if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
> - cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
> - ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
> + cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh;
> + ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight;
> } else {
> cw = w;
> ch = h;
> @@ -1901,8 +1901,8 @@ w9968cf_set_window(struct w9968cf_device
> /* We have to scale win.x and win.y offsets */
> if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
> || (cam->vpp_flag & VPP_UPSCALE) ) {
> - ax = __SC(win.x)/fw;
> - ay = __SC(win.y)/fh;
> + ax = SC(win.x)/fw;
> + ay = SC(win.y)/fh;
> } else {
> ax = win.x;
> ay = win.y;
> @@ -1917,8 +1917,8 @@ w9968cf_set_window(struct w9968cf_device
> /* Adjust win.x, win.y */
> if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
> || (cam->vpp_flag & VPP_UPSCALE) ) {
> - win.x = __UNSC(ax*fw);
> - win.y = __UNSC(ay*fh);
> + win.x = UNSC(ax*fw);
> + win.y = UNSC(ay*fh);
> } else {
> win.x = ax;
> win.y = ay;
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
