RE: [PATCH] Add IDE mode support for SB600 SATA

["Conke Hu" <conke.hu@amd.com>]

-----Original Message-----
From: Arjan van de Ven [mailto:arjan@infradead.org] 
Sent: Thursday, November 23, 2006 4:06 PM
To: Conke Hu
Cc: linux-kernel@vger.kernel.org; alan@lxorguk.ukuu.org.uk; Andrew Morton; Jeff Garzik
Subject: Re: [PATCH] Add IDE mode support for SB600 SATA

On Thu, 2006-11-23 at 12:20 +0800, Conke Hu wrote:
> ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native IDE, AHCI and RAID. Legacy/Native IDE mode is designed for compatibility with some old OS without AHCI driver but looses SATAII/AHCI features such as NCQ. This patch will make SB600 SATA run in AHCI mode even if it was set as IDE mode by system BIOS.


is this really the right thing? You're overriding a user chosen configuration here.... while that might be justifiable.. it's probably a good idea to at least provide a safety-valve for this one. The user might have made that selection very deliberately.

--
if you want to mail me at work (you don't), use arjan (at) linux.intel.com Test the interaction between Linux and your BIOS via http://www.linuxfirmwarekit.org

---------------------------------------------------------------------------------


Hi all,
    For all your convenience, I paste 2 patches here, pls see following. 
    For the chip view, I think, either of them is reasonable, but kernel module maintainers maybe have more consideration, so if the module maintainers (Alan Cox?) have any advice, please let me know and I will modify my patch as soon as possible :) Thanks!

=============== solution 1 ==================

diff -Nur linux-2.6.19-rc6-git4.orig/drivers/ata/ahci.c linux-2.6.19-rc6-git4/drivers/ata/ahci.c
--- linux-2.6.19-rc6-git4.orig/drivers/ata/ahci.c	2006-11-23 13:36:52.000000000 +0800
+++ linux-2.6.19-rc6-git4/drivers/ata/ahci.c	2006-11-23 13:50:13.000000000 +0800
@@ -323,7 +323,14 @@
 	{ PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */
 
 	/* ATI */
+#ifdef CONFIG_SB600_AHCI_IDE
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
+#else
+	{ PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID<<8, 0xffff00, 
+	  board_ahci },
+	{ PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0x010600, 0xffff00, 
+	  board_ahci },
+#endif
 	{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
 
 	/* VIA */
diff -Nur linux-2.6.19-rc6-git4.orig/drivers/ata/Kconfig linux-2.6.19-rc6-git4/drivers/ata/Kconfig
--- linux-2.6.19-rc6-git4.orig/drivers/ata/Kconfig	2006-11-23 13:36:52.000000000 +0800
+++ linux-2.6.19-rc6-git4/drivers/ata/Kconfig	2006-11-23 13:37:50.000000000 +0800
@@ -27,6 +27,18 @@
 
 	  If unsure, say N.
 
+config SB600_AHCI_IDE
+	bool "ATI SB600 IDE mode of SATA controller support"
+	depends on SATA_AHCI
+	default y
+	help
+	  ATI SB600 SATA controller supports 4 modes: Legacy IDE, Native 
+	  IDE, AHCI and RAID. If this option is enabled, the contoller 
+	  will run in AHCI mode and use ahci.ko as it's driver, otherwise
+	  it will work as an IDE controller using atiixp.ko as it's driver.
+
+	  If unsure, say y.
+
 config SATA_SVW
 	tristate "ServerWorks Frodo / Apple K2 SATA support"
 	depends on PCI
diff -Nur linux-2.6.19-rc6-git4.orig/drivers/ide/pci/atiixp.c linux-2.6.19-rc6-git4/drivers/ide/pci/atiixp.c
--- linux-2.6.19-rc6-git4.orig/drivers/ide/pci/atiixp.c	2006-11-23 13:36:51.000000000 +0800
+++ linux-2.6.19-rc6-git4/drivers/ide/pci/atiixp.c	2006-11-23 13:38:08.000000000 +0800
@@ -318,7 +318,8 @@
 	hwif->drives[0].autodma = hwif->autodma;  }
 
-static void __devinit init_hwif_sb600_legacy(ide_hwif_t *hwif)
+#ifndef CONFIG_SB600_AHCI_IDE
+static void __devinit init_hwif_sb600_sata(ide_hwif_t *hwif)
 {
 
 	hwif->atapi_dma = 1;
@@ -331,6 +332,7 @@
 	hwif->drives[0].autodma = hwif->autodma;
 	hwif->drives[1].autodma = hwif->autodma;  }
+#endif
 
 static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
 	{	/* 0 */
@@ -340,13 +342,16 @@
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
 		.bootable	= ON_BOARD,
-	},{	/* 1 */
-		.name		= "ATI SB600 SATA Legacy IDE",
-		.init_hwif	= init_hwif_sb600_legacy,
+	},
+#ifndef CONFIG_SB600_AHCI_IDE
+	{	/* 1 */
+		.name		= "ATI SB600 SATA (IDE mode)",
+		.init_hwif	= init_hwif_sb600_sata,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.bootable	= ON_BOARD,
 	}
+#endif
 };
 
 /**
@@ -368,7 +373,9 @@
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, PCI_ANY_ID, (PCI_CLASS_STORAGE_IDE<<8)|0x8a, 0xffff05, 1},
+#ifndef CONFIG_SB600_AHCI_IDE
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, PCI_ANY_ID, 
+PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, 1}, #endif
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff -Nur linux-2.6.19-rc6-git4.orig/drivers/pci/quirks.c linux-2.6.19-rc6-git4/drivers/pci/quirks.c
--- linux-2.6.19-rc6-git4.orig/drivers/pci/quirks.c	2006-11-23 13:36:52.000000000 +0800
+++ linux-2.6.19-rc6-git4/drivers/pci/quirks.c	2006-11-23 13:38:17.000000000 +0800
@@ -796,6 +796,25 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
 
+#ifdef CONFIG_SB600_AHCI_IDE
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev) {
+	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+		u8 tmp;
+
+		pci_read_config_byte(pdev, 0x40, &tmp);
+		pci_write_config_byte(pdev, 0x40, tmp|1);
+		pci_write_config_byte(pdev, 0x9, 1);
+		pci_write_config_byte(pdev, 0xa, 6);
+		pci_write_config_byte(pdev, 0x40, tmp);
+		
+		pdev->class = 0x010601;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 
+PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata); #endif
+
+
 /*
  * As per PCI spec, ignore base address registers 0-3 of the IDE controllers
  * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and



===================== solution 2 ========================

--- linux-2.6.19-rc6-git4/drivers/pci/quirks.c.orig	2006-11-23 19:45:49.000000000 +0800
+++ linux-2.6.19-rc6-git4/drivers/pci/quirks.c	2006-11-23 19:34:23.000000000 +0800
@@ -795,6 +795,25 @@ static void __init quirk_mediagx_master(
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+ 
+#if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE) 
+static void __devinit quirk_sb600_sata(struct pci_dev *pdev) {
+	/* set sb600 sata to ahci mode */
+	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+		u8 tmp;
+
+		pci_read_config_byte(pdev, 0x40, &tmp);
+		pci_write_config_byte(pdev, 0x40, tmp|1);
+		pci_write_config_byte(pdev, 0x9, 1);
+		pci_write_config_byte(pdev, 0xa, 6);
+		pci_write_config_byte(pdev, 0x40, tmp);
+		
+		pdev->class = 0x010601;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 
+PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata); #endif
 
 /*
  * As per PCI spec, ignore base address registers 0-3 of the IDE controllers

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/