re: pdc202xx_old+suspend+smartctl -> hard lockup

["Tobias Oed" <tobiasoed@hotmail.com>]

> >Hi!
> >
> > > Hello, if I run
> > > smartctl -s on /dev/hde
> > > after suspending my machine to ram (echo mem > /sys/power/state), it 
> >locks
> > > up with nothing on serial console, and no sysrq.
> > > If I move hde to hdd, I don't have the problem, so I suspect the 
> problem
> > > comes from my (on board) pdc20265 ide controller and not the drive.
> > > This is a fc6 system running a vanilla 2.6.18 kernel (the fc kernels 
> >have
> > > the same issue) and smartd disabled.
> >
> >Does suspend-to-disk work on same machine?
> >                                                                       
> Pavel
>
> Both suspend to disk and standby survive the smartctl -s on /dev/hde. It's 
> only after resuming from suspend to ram that smartctl will hang the box.
> Tobias.

Quick note to report that this problem is gone with 2.6.19-rc5
Thanks for a great kernel!
Tobias

_________________________________________________________________
Share your latest news with your friends with the Windows Live Spaces 
friends module. 
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mk

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/