Re: pdc202xx_old+suspend+smartctl -> hard lockup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> Hello, if I run
> smartctl -s on /dev/hde
> after suspending my machine to ram (echo mem > /sys/power/state), it locks
> up with nothing on serial console, and no sysrq.
> If I move hde to hdd, I don't have the problem, so I suspect the problem
> comes from my (on board) pdc20265 ide controller and not the drive.
> This is a fc6 system running a vanilla 2.6.18 kernel (the fc kernels have
> the same issue) and smartd disabled.

Does suspend-to-disk work on same machine?
									Pavel

Both suspend to disk and standby survive the smartctl -s on /dev/hde. It's only after resuming from suspend to ram that smartctl will hang the box.
Tobias.

_________________________________________________________________
Stay in touch with old friends and meet new ones with Windows Live Spaces http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux