On 10/28/06, Adrian Bunk <[email protected]> wrote:
Greg, is this 2.6.19-rc1 regression anything you've already heard about,
or should Jeff bisect for the commit that broke it?
So it's a PCI problem, not a tg3 issue.
And tg3 is even not the first driver that fails after this...
Adrian, thanks for the lead, so I decided to try different PCI setting.
Setting to "BIOS" make tg3 works again.
Up to 2.6.18, I was using "PCI access mode (Any)" and had no problem,
but from 2.6.19-rc1 onwards, setting to "ANY" doesn't seem to work
anymore.
I've just tested all 2.6.19-rc[123] and all are working with the
"BIOS" setting, but not "ANY".
New setting in .config ...
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOANY is not set
Thanks for all your help!
Jeff.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
