[PATCH] s2io: add PCI error recovery support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Koushik, Raju,
Please review, comment, and if you find this acceptable, 
please forward upstream.

--linas

This patch adds PCI error recovery support to the 
s2io 10-Gigabit ethernet device driver.

Tested, seems to work well.

Signed-off-by: Linas Vepstas <[email protected]>
Cc: Raghavendra Koushik <[email protected]>
Cc: Ananda Raju <[email protected]>
Cc: Wen Xiong <[email protected]>

----
 drivers/net/s2io.c |   77 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/s2io.h |    5 +++
 2 files changed, 82 insertions(+)

Index: linux-2.6.19-rc1-git11/drivers/net/s2io.c
===================================================================
--- linux-2.6.19-rc1-git11.orig/drivers/net/s2io.c	2006-10-20 12:24:17.000000000 -0500
+++ linux-2.6.19-rc1-git11/drivers/net/s2io.c	2006-10-24 16:19:49.000000000 -0500
@@ -434,11 +434,18 @@ static struct pci_device_id s2io_tbl[] _
 
 MODULE_DEVICE_TABLE(pci, s2io_tbl);
 
+static struct pci_error_handlers s2io_err_handler = {
+	.error_detected = s2io_io_error_detected,
+	.slot_reset = s2io_io_slot_reset,
+	.resume = s2io_io_resume,
+};
+
 static struct pci_driver s2io_driver = {
       .name = "S2IO",
       .id_table = s2io_tbl,
       .probe = s2io_init_nic,
       .remove = __devexit_p(s2io_rem_nic),
+      .err_handler = &s2io_err_handler,
 };
 
 /* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -7564,3 +7571,73 @@ static void lro_append_pkt(nic_t *sp, lr
 	sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
 	return;
 }
+
+/**
+ * s2io_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	nic_t *sp = netdev->priv;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		/* Reset card */
+		s2io_card_down(sp);
+		sp->device_close_flag = TRUE;	/* Device is shut down. */
+	}
+	pci_disable_device(pdev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * s2io_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	nic_t *sp = netdev->priv;
+
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR "s2io: Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+	s2io_reset(sp);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * s2io_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void s2io_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	nic_t *sp = netdev->priv;
+
+	if (netif_running(netdev)) {
+		if (s2io_card_up(sp)) {
+			printk(KERN_ERR "s2io: can't bring device back up after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+	netif_wake_queue(netdev);
+}
Index: linux-2.6.19-rc1-git11/drivers/net/s2io.h
===================================================================
--- linux-2.6.19-rc1-git11.orig/drivers/net/s2io.h	2006-10-20 12:24:17.000000000 -0500
+++ linux-2.6.19-rc1-git11/drivers/net/s2io.h	2006-10-20 12:41:39.000000000 -0500
@@ -1013,6 +1013,11 @@ static void queue_rx_frame(struct sk_buf
 static void update_L3L4_header(nic_t *sp, lro_t *lro);
 static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len);
 
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
+					                      pci_channel_state_t state);
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev);
+static void s2io_io_resume(struct pci_dev *pdev);
+
 #define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
 #define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size
 #define s2io_offload_type(skb) skb_shinfo(skb)->gso_type
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux