On Thu, Oct 19, 2006 at 10:14:11AM -0700, Andrew Morton wrote:
> On Thu, 19 Oct 2006 08:48:10 -0600
> [email protected] (Eric W. Biederman) wrote:
>
> > >
> > > There are already three interrupt sources on 201, so they are all happy to
> > > share.
> > >
> > > It's e1000. Jesse, you fibbed ;)
> > >
> > > static int e1000_request_irq(struct e1000_adapter *adapter)
> > > {
> > > ...
> > > if (adapter->have_msi)
> > > flags &= ~IRQF_SHARED;
> >
> > Well MSI irqs can't be shared, as they are edged triggered.
> > Is the e1000 really trying to use irq 201? That would indicate
> > a logic failure in the msi irq allocator. It should never allocate
> > an inuse irq.
>
> It's gone very bad. See
> http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.boot
> http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.out
>
> > I have to ask what is the state in 2.6.19-rc2? I'm wondering if
> > my turning of the msi irq allocator inside out has fixed this problem.
>
> Martin, please try CONFIG_PCI_MSI=n. I'd expect that to fix it (it always does)
>
> > Does this situation work if MSI is disabled, in 2.6.18?
> >
> > The backwards msi irq allocator in 2.6.18 is so convoluted it may have
> > a corner case where it fails, and that is triggering this mess.
> >
> > If 2.6.19 works with MSI's enabled and 2.6.18 works with MSI disabled
> > I'm inclined to say I have done all that is reasonable.
>
> oh, we haven't tried 2.6.19-rc2 yet? Please do that, with CONFIG_PCI_MSI=y.
ok...
I compliled and installed the latest git yesterday evening and another one
this morning because of a configuration mistake I made
there are new DWARFs but the one I reported for 2.6.18 seem to be fixed
at least I diden't succeed in triggering it
the new ones are in
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty.run
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty.boot
http://www.lorenz.eu.org/~mlo/kernel/interrupts_2.6.19-rc2-tp-ie-e1-42.5+0737-gce9e3d99-dirty
is there too
http://www.lorenz.eu.org/~mlo/kernel/?C=M;O=D
for a list of files I uploaded
[ 64.655000] kobject_add failed for vcs6 with -EEXIST, don't try to register things with the same name in the same directory.
[ 64.655000] [<c0103bfd>] dump_trace+0x69/0x1af
[ 64.655000] [<c0103d5b>] show_trace_log_lvl+0x18/0x2c
[ 64.656000] [<c01043fa>] show_trace+0xf/0x11
[ 64.656000] [<c01044fd>] dump_stack+0x15/0x17
[ 64.656000] [<c01fbf3d>] kobject_add+0x160/0x189
[ 64.657000] [<c0250fec>] class_device_add+0xa2/0x3d8
[ 64.658000] [<c02513ae>] class_device_create+0x7c/0x9c
[ 64.659000] [<c0237858>] vcs_make_sysfs+0x3c/0x7e
[ 64.659000] [<c023c641>] con_open+0x6f/0x7c
[ 64.660000] [<c023259b>] tty_open+0x179/0x2f0
[ 64.661000] [<c016226e>] chrdev_open+0x124/0x13f
[ 64.662000] [<c015e665>] __dentry_open+0xc7/0x1ab
[ 64.662000] [<c015e7c3>] nameidata_to_filp+0x24/0x33
[ 64.662000] [<c015e804>] do_filp_open+0x32/0x39
[ 64.663000] [<c015e84d>] do_sys_open+0x42/0xc3
[ 64.663000] [<c015e907>] sys_open+0x1c/0x1e
[ 64.664000] [<c0102de7>] syscall_call+0x7/0xb
[ 64.664000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[ 64.664000]
[ 64.664000] Leftover inexact backtrace:
[ 64.664000]
[ 64.664000] =======================
[ 64.666000] kobject_add failed for vcsa6 with -EEXIST, don't try to register things with the same name in the same directory.
[ 64.666000] [<c0103bfd>] dump_trace+0x69/0x1af
[ 64.666000] [<c0103d5b>] show_trace_log_lvl+0x18/0x2c
[ 64.666000] [<c01043fa>] show_trace+0xf/0x11
[ 64.666000] [<c01044fd>] dump_stack+0x15/0x17
[ 64.667000] [<c01fbf3d>] kobject_add+0x160/0x189
[ 64.667000] [<c0250fec>] class_device_add+0xa2/0x3d8
[ 64.668000] [<c02513ae>] class_device_create+0x7c/0x9c
[ 64.668000] [<c0237895>] vcs_make_sysfs+0x79/0x7e
[ 64.669000] [<c023c641>] con_open+0x6f/0x7c
[ 64.670000] [<c023259b>] tty_open+0x179/0x2f0
[ 64.670000] [<c016226e>] chrdev_open+0x124/0x13f
[ 64.670000] [<c015e665>] __dentry_open+0xc7/0x1ab
[ 64.671000] [<c015e7c3>] nameidata_to_filp+0x24/0x33
[ 64.671000] [<c015e804>] do_filp_open+0x32/0x39
[ 64.671000] [<c015e84d>] do_sys_open+0x42/0xc3
[ 64.672000] [<c015e907>] sys_open+0x1c/0x1e
[ 64.673000] [<c0102de7>] syscall_call+0x7/0xb
[ 64.673000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[ 64.673000]
[ 64.673000] Leftover inexact backtrace:
[ 64.673000]
[ 64.673000] =======================
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]