just got the following on resume:
[87026.242000] usb 4-2: USB disconnect, address 18
[87026.448000] usb 4-2: new full speed USB device using uhci_hcd and address
20
[87026.613000] usb 4-2: configuration #1 chosen from 1 choice
[87026.704000] IRQ handler type mismatch for IRQ 90
[87026.704000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87026.704000] [<c01044cb>] show_trace+0xf/0x11
[87026.705000] [<c01045ce>] dump_stack+0x15/0x17
[87026.705000] [<c01403d7>] setup_irq+0x17d/0x190
[87026.705000] [<c0140466>] request_irq+0x7c/0x98
[87026.706000] [<c0251745>] e1000_open+0xcd/0x1a4
[87026.707000] [<c029565c>] dev_open+0x2b/0x62
[87026.708000] [<c0294181>] dev_change_flags+0x47/0xe4
[87026.709000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87026.711000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87026.712000] [<c016b6af>] do_ioctl+0x1f/0x62
[87026.712000] [<c016b937>] vfs_ioctl+0x245/0x257
[87026.713000] [<c016b995>] sys_ioctl+0x4c/0x67
[87026.714000] [<c0102db3>] syscall_call+0x7/0xb
[87026.714000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87026.715000] Leftover inexact backtrace:
[87026.715000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87027.026000] usb 4-1: new full speed USB device using uhci_hcd and address
21
[87027.055000] ata1: waiting for device to spin up (7 secs)
[87027.186000] usb 4-1: configuration #1 chosen from 1 choice
[87027.757000] IRQ handler type mismatch for IRQ 98
[87027.757000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87027.757000] [<c01044cb>] show_trace+0xf/0x11
[87027.758000] [<c01045ce>] dump_stack+0x15/0x17
[87027.758000] [<c01403d7>] setup_irq+0x17d/0x190
[87027.758000] [<c0140466>] request_irq+0x7c/0x98
[87027.759000] [<c0251745>] e1000_open+0xcd/0x1a4
[87027.760000] [<c029565c>] dev_open+0x2b/0x62
[87027.761000] [<c0294181>] dev_change_flags+0x47/0xe4
[87027.762000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87027.764000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87027.765000] [<c016b6af>] do_ioctl+0x1f/0x62
[87027.766000] [<c016b937>] vfs_ioctl+0x245/0x257
[87027.766000] [<c016b995>] sys_ioctl+0x4c/0x67
[87027.767000] [<c0102db3>] syscall_call+0x7/0xb
[87027.767000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87027.767000] Leftover inexact backtrace:
[87027.767000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87028.810000] IRQ handler type mismatch for IRQ 106
[87028.810000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87028.810000] [<c01044cb>] show_trace+0xf/0x11
[87028.811000] [<c01045ce>] dump_stack+0x15/0x17
[87028.811000] [<c01403d7>] setup_irq+0x17d/0x190
[87028.811000] [<c0140466>] request_irq+0x7c/0x98
[87028.812000] [<c0251745>] e1000_open+0xcd/0x1a4
[87028.813000] [<c029565c>] dev_open+0x2b/0x62
[87028.814000] [<c0294181>] dev_change_flags+0x47/0xe4
[87028.815000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87028.817000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87028.818000] [<c016b6af>] do_ioctl+0x1f/0x62
[87028.818000] [<c016b937>] vfs_ioctl+0x245/0x257
[87028.819000] [<c016b995>] sys_ioctl+0x4c/0x67
[87028.820000] [<c0102db3>] syscall_call+0x7/0xb
[87028.820000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87028.820000] Leftover inexact backtrace:
[87028.820000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87029.863000] IRQ handler type mismatch for IRQ 114
[87029.863000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87029.863000] [<c01044cb>] show_trace+0xf/0x11
[87029.864000] [<c01045ce>] dump_stack+0x15/0x17
[87029.864000] [<c01403d7>] setup_irq+0x17d/0x190
[87029.864000] [<c0140466>] request_irq+0x7c/0x98
[87029.865000] [<c0251745>] e1000_open+0xcd/0x1a4
[87029.866000] [<c029565c>] dev_open+0x2b/0x62
[87029.867000] [<c0294181>] dev_change_flags+0x47/0xe4
[87029.868000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87029.870000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87029.871000] [<c016b6af>] do_ioctl+0x1f/0x62
[87029.871000] [<c016b937>] vfs_ioctl+0x245/0x257
[87029.872000] [<c016b995>] sys_ioctl+0x4c/0x67
[87029.873000] [<c0102db3>] syscall_call+0x7/0xb
[87029.873000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87029.873000] Leftover inexact backtrace:
[87029.873000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87030.917000] IRQ handler type mismatch for IRQ 122
[87030.917000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87030.917000] [<c01044cb>] show_trace+0xf/0x11
[87030.918000] [<c01045ce>] dump_stack+0x15/0x17
[87030.918000] [<c01403d7>] setup_irq+0x17d/0x190
[87030.918000] [<c0140466>] request_irq+0x7c/0x98
[87030.919000] [<c0251745>] e1000_open+0xcd/0x1a4
[87030.920000] [<c029565c>] dev_open+0x2b/0x62
[87030.921000] [<c0294181>] dev_change_flags+0x47/0xe4
[87030.922000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87030.924000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87030.925000] [<c016b6af>] do_ioctl+0x1f/0x62
[87030.925000] [<c016b937>] vfs_ioctl+0x245/0x257
[87030.926000] [<c016b995>] sys_ioctl+0x4c/0x67
[87030.927000] [<c0102db3>] syscall_call+0x7/0xb
[87030.927000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87030.927000] Leftover inexact backtrace:
[87030.927000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87031.970000] IRQ handler type mismatch for IRQ 130
[87031.970000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87031.970000] [<c01044cb>] show_trace+0xf/0x11
[87031.971000] [<c01045ce>] dump_stack+0x15/0x17
[87031.971000] [<c01403d7>] setup_irq+0x17d/0x190
[87031.971000] [<c0140466>] request_irq+0x7c/0x98
[87031.972000] [<c0251745>] e1000_open+0xcd/0x1a4
[87031.973000] [<c029565c>] dev_open+0x2b/0x62
[87031.974000] [<c0294181>] dev_change_flags+0x47/0xe4
[87031.975000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87031.977000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87031.978000] [<c016b6af>] do_ioctl+0x1f/0x62
[87031.978000] [<c016b937>] vfs_ioctl+0x245/0x257
[87031.979000] [<c016b995>] sys_ioctl+0x4c/0x67
[87031.980000] [<c0102db3>] syscall_call+0x7/0xb
[87031.980000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87031.980000] Leftover inexact backtrace:
[87031.980000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87034.525000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
full dmesg is at
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.boot
(boot time) and
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.out
(runtime)
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]