On Tuesday 17 October 2006 15:50, John Philips wrote:
> Hi,
>
> I recently upgraded some router/NAT devices from 2.4.25 to 2.6.17.8.
> They're using VIA C3 processors and NatSemi DP83815 NICs.
>
> Right after the upgrade I started noticing these error messages on one of
> the heavier-loaded boxes. This particular box routes and does NAT for
> around 400 users, peaking at 6Mb/sec of throughput.
>
> The errors were happening about every 3-5 minutes. I statically set eth6
> to 100baseTX-FD with mii-tool, and now the errors appear every few hours
> for 10-20 minute stretches.
>
> I searched Google and couldn't find any insight (FYI, I'm NOT using the
> CIPE patches).
>
> Any ideas?
Could you send us, once your machine is handling its typical load :
lspci -v
ethtool -S eth6
tc -s -d qdisc
cat /proc/slabinfo
cat /proc/meminfo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
