Re: "qc timeout" error in sata_sil 3114 driver, 2.6.18

[cc'ing linux-ide]

Timur Tabi wrote:

I'm working on a new PowerPC board (8349 based) with a Silicon Image 3114 SATA controller connected to a Hitachi drive. When the sata_sil driver loads and tries to find the device, I get "qc timeout" errors. I don't know a lot about SATA. Can anyone give me a clue as

to what could be wrong?

Several questions.

1. does any previous kernel version work?  say, 2.6.17?
2. can your ppc board do byte-aligned mmio access?
3. it could be irq routing problem.  can you verify that?

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

---

• References:
  • "qc timeout" error in sata_sil 3114 driver, 2.6.18
    • From: Timur Tabi <[email protected]>

• Prev by Date: Improvements in 2.6.18 will help SATA?
• Next by Date: Re: [PATCH] restore __iomem annotations in e1000
• Previous by thread: "qc timeout" error in sata_sil 3114 driver, 2.6.18
• Next by thread: Freecom DVB-T tuner firmware load with ohci(ehci) driver
• Index(es):
  • Date
  • Thread

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]