[Patch 1/7] megaraid_sas FW transition and q size changes

This patch has the following enhancements :
	- handles new transition states of FW to support controller hotplug. 
	- It reduces by 1 the maximum cmds that the driver may send to FW. 
	- Sends "Stop Processing" cmd to FW before returning failure from reset routine
	- Adds print in megasas_transition routine
	- Sends "RESET" flag to FW to do a soft reset of controller 
to move from Operational to Ready state, 
	  
	This patch has been generated on latest scsi-misc git.

Signed-off-by: Sumant Patro <[email protected]>

diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c 2006-09-20 10:20:40.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c 2006-09-20 10:26:56.000000000 -0700
@@ -832,6 +832,12 @@ static int megasas_wait_for_outstanding(
  }
 
  if (atomic_read(&instance->fw_outstanding)) {
+  /*
+  * Send signal to FW to stop processing any pending cmds.
+  * The controller will be taken offline by the OS now.
+  */
+  writel(MFI_STOP_ADP,
+    &instance->reg_set->inbound_doorbell);
   instance->hw_crit_error = 1;
   return FAILED;
  }
@@ -1229,10 +1235,12 @@ megasas_transition_to_ready(struct megas
 
  fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
 
+ if (fw_state != MFI_STATE_READY) 
+   printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+          " state\n");
+
  while (fw_state != MFI_STATE_READY) {
 
-  printk(KERN_INFO "megasas: Waiting for FW to come to ready"
-         " state\n");
   switch (fw_state) {
 
   case MFI_STATE_FAULT:
@@ -1244,19 +1252,27 @@ megasas_transition_to_ready(struct megas
    /*
     * Set the CLR bit in inbound doorbell
     */
-   writel(MFI_INIT_CLEAR_HANDSHAKE,
+   writel(MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
     &instance->reg_set->inbound_doorbell);
 
    max_wait = 2;
    cur_state = MFI_STATE_WAIT_HANDSHAKE;
    break;
 
+  case MFI_STATE_BOOT_MESSAGE_PENDING: 
+   writel(MFI_INIT_HOTPLUG,
+    &instance->reg_set->inbound_doorbell);
+
+   max_wait = 10;
+   cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
+   break;
+
   case MFI_STATE_OPERATIONAL:
    /*
-    * Bring it to READY state; assuming max wait 2 secs
+    * Bring it to READY state; assuming max wait 10 secs
     */
    megasas_disable_intr(instance);
-   writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
+   writel(MFI_RESET_FLAGS, &instance->reg_set->inbound_doorbell);
 
    max_wait = 10;
    cur_state = MFI_STATE_OPERATIONAL;
@@ -1323,6 +1339,7 @@ megasas_transition_to_ready(struct megas
    return -ENODEV;
   }
  };
+  printk(KERN_INFO "megasas: FW now in Ready state\n");
 
  return 0;
 }
@@ -1690,6 +1707,12 @@ static int megasas_init_mfi(struct megas
   * Get various operational parameters from status register
   */
  instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ /*
+  * Reduce the max supported cmds by 1. This is to ensure that the 
+  * reply_q_sz (1 more than the max cmd that driver may send)
+  * does not exceed max cmds that the FW can support
+  */
+ instance->max_fw_cmds = instance->max_fw_cmds-1;
  instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 
      0x10;
  /*
diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h 2006-09-20 10:20:40.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h 2006-09-20 10:33:31.000000000 -0700
@@ -50,6 +50,7 @@
 #define MFI_STATE_WAIT_HANDSHAKE  0x60000000
 #define MFI_STATE_FW_INIT_2   0x70000000
 #define MFI_STATE_DEVICE_SCAN   0x80000000
+#define MFI_STATE_BOOT_MESSAGE_PENDING  0x90000000
 #define MFI_STATE_FLUSH_CACHE   0xA0000000
 #define MFI_STATE_READY    0xB0000000
 #define MFI_STATE_OPERATIONAL   0xC0000000
@@ -64,12 +65,18 @@
  * READY : Move from OPERATIONAL to READY state; discard queue info
  * MFIMODE : Discard (possible) low MFA posted in 64-bit mode (??)
  * CLR_HANDSHAKE: FW is waiting for HANDSHAKE from BIOS or Driver
+ * HOTPLUG : Resume from Hotplug
+ * MFI_STOP_ADP : Send signal to FW to stop processing
  */
-#define MFI_INIT_ABORT    0x00000000
+#define MFI_INIT_ABORT    0x00000001
 #define MFI_INIT_READY    0x00000002
 #define MFI_INIT_MFIMODE   0x00000004
 #define MFI_INIT_CLEAR_HANDSHAKE  0x00000008
-#define MFI_RESET_FLAGS    MFI_INIT_READY|MFI_INIT_MFIMODE
+#define MFI_INIT_HOTPLUG   0x00000010
+#define MFI_STOP_ADP    0x00000020
+#define MFI_RESET_FLAGS    MFI_INIT_READY| \
+      MFI_INIT_MFIMODE| \
+      MFI_INIT_ABORT
 
 /**
  * MFI frame flags

diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.c	2006-09-20 10:20:40.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.c	2006-09-20 10:26:56.000000000 -0700
@@ -832,6 +832,12 @@ static int megasas_wait_for_outstanding(
 	}
 
 	if (atomic_read(&instance->fw_outstanding)) {
+		/*
+		* Send signal to FW to stop processing any pending cmds.
+		* The controller will be taken offline by the OS now.
+		*/
+		writel(MFI_STOP_ADP,
+				&instance->reg_set->inbound_doorbell);
 		instance->hw_crit_error = 1;
 		return FAILED;
 	}
@@ -1229,10 +1235,12 @@ megasas_transition_to_ready(struct megas
 
 	fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
 
+	if (fw_state != MFI_STATE_READY) 
+ 		printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+ 		       " state\n");
+
 	while (fw_state != MFI_STATE_READY) {
 
-		printk(KERN_INFO "megasas: Waiting for FW to come to ready"
-		       " state\n");
 		switch (fw_state) {
 
 		case MFI_STATE_FAULT:
@@ -1244,19 +1252,27 @@ megasas_transition_to_ready(struct megas
 			/*
 			 * Set the CLR bit in inbound doorbell
 			 */
-			writel(MFI_INIT_CLEAR_HANDSHAKE,
+			writel(MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
 				&instance->reg_set->inbound_doorbell);
 
 			max_wait = 2;
 			cur_state = MFI_STATE_WAIT_HANDSHAKE;
 			break;
 
+		case MFI_STATE_BOOT_MESSAGE_PENDING:	
+			writel(MFI_INIT_HOTPLUG,
+				&instance->reg_set->inbound_doorbell);
+
+			max_wait = 10;
+			cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
+			break;
+
 		case MFI_STATE_OPERATIONAL:
 			/*
-			 * Bring it to READY state; assuming max wait 2 secs
+			 * Bring it to READY state; assuming max wait 10 secs
 			 */
 			megasas_disable_intr(instance);
-			writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
+			writel(MFI_RESET_FLAGS, &instance->reg_set->inbound_doorbell);
 
 			max_wait = 10;
 			cur_state = MFI_STATE_OPERATIONAL;
@@ -1323,6 +1339,7 @@ megasas_transition_to_ready(struct megas
 			return -ENODEV;
 		}
 	};
+ 	printk(KERN_INFO "megasas: FW now in Ready state\n");
 
 	return 0;
 }
@@ -1690,6 +1707,12 @@ static int megasas_init_mfi(struct megas
 	 * Get various operational parameters from status register
 	 */
 	instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+	/*
+	 * Reduce the max supported cmds by 1. This is to ensure that the 
+	 * reply_q_sz (1 more than the max cmd that driver may send)
+	 * does not exceed max cmds that the FW can support
+	 */
+	instance->max_fw_cmds = instance->max_fw_cmds-1;
 	instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 
 					0x10;
 	/*
diff -uprN linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6orig/drivers/scsi/megaraid/megaraid_sas.h	2006-09-20 10:20:40.000000000 -0700
+++ linux-2.6new/drivers/scsi/megaraid/megaraid_sas.h	2006-09-20 10:33:31.000000000 -0700
@@ -50,6 +50,7 @@
 #define MFI_STATE_WAIT_HANDSHAKE		0x60000000
 #define MFI_STATE_FW_INIT_2			0x70000000
 #define MFI_STATE_DEVICE_SCAN			0x80000000
+#define MFI_STATE_BOOT_MESSAGE_PENDING		0x90000000
 #define MFI_STATE_FLUSH_CACHE			0xA0000000
 #define MFI_STATE_READY				0xB0000000
 #define MFI_STATE_OPERATIONAL			0xC0000000
@@ -64,12 +65,18 @@
  * READY	: Move from OPERATIONAL to READY state; discard queue info
  * MFIMODE	: Discard (possible) low MFA posted in 64-bit mode (??)
  * CLR_HANDSHAKE: FW is waiting for HANDSHAKE from BIOS or Driver
+ * HOTPLUG	: Resume from Hotplug
+ * MFI_STOP_ADP	: Send signal to FW to stop processing
  */
-#define MFI_INIT_ABORT				0x00000000
+#define MFI_INIT_ABORT				0x00000001
 #define MFI_INIT_READY				0x00000002
 #define MFI_INIT_MFIMODE			0x00000004
 #define MFI_INIT_CLEAR_HANDSHAKE		0x00000008
-#define MFI_RESET_FLAGS				MFI_INIT_READY|MFI_INIT_MFIMODE
+#define MFI_INIT_HOTPLUG			0x00000010
+#define MFI_STOP_ADP				0x00000020
+#define MFI_RESET_FLAGS				MFI_INIT_READY| \
+						MFI_INIT_MFIMODE| \
+						MFI_INIT_ABORT
 
 /**
  * MFI frame flags

Prev by Date: ZONE_DMA (was: Re: 2.6.19 -mm merge plans)
Next by Date: Re: [patch02/05]: Containers(V2)- Generic Linux kernel changes
Previous by thread: [PATCH] Linux Markers 0.4 (+dynamic probe loader) for 2.6.17
Next by thread: Request kernel 2.6.18 ..
Index(es):
- Date
- Thread

[Index of Archives] [Kernel Newbies] [Netfilter] [Bugtraq] [Photo] [Stuff] [Gimp] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux Security] [Linux RAID] [Video 4 Linux] [Linux for the blind] [Linux Resources]