Hello,
On Sat, Sep 16, 2006 at 04:24:02PM -0700, Chris Frost wrote:
> [1.] One line summary of the problem:
> 2.4.32 proc_pid_stat() repeatedly segfaults.
>
> [2.] Full description of the problem/report:
> 2.4.32 kernel, after being up for a few days to a few weeks, repeatedly
> segfaults in proc_pid_stat(), triggered by w, ps, and other programs.
>
> [3.] Keywords (i.e., modules, networking, kernel):
> kernel proc_pid_stat()
>
> [4.] Kernel version (from /proc/version):
> $ cat /proc/version
> Linux version 2.4.32 (root@tiger) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Dec 21 10:57:37 CST 2005
>
> [5.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
> See attached oops.w.log (triggered by w) and oops.ps.log (triggered by ps).
>
> [6.] A small shell script or example program which triggers the
> problem (if possible)
> Once it starts oopsing, "w" and "ps aux" trigger an oops every time.
>
> [7.] Environment
> i386 Debian sarge on a network server in a closet.
>
> [7.1.] Software (add the output of the ver_linux script here)
> $ sh /usr/src/linux-2.4.32/scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux tiger 2.4.32 #1 Wed Dec 21 10:57:37 CST 2005 i686 GNU/Linux
>
> Gnu C 3.3.5
> Gnu make 3.80
> util-linux 2.12p
> mount 2.12p
> modutils 2.4.26
> e2fsprogs 1.37
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.2.1
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 5.2.1
> Modules Loaded sg
>
> [7.2.] Processor information (from /proc/cpuinfo):
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 4
> model name : AMD Athlon(tm) Processor
> stepping : 2
> cpu MHz : 902.069
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3
>
> [7.3.] Module information (from /proc/modules):
> $ cat /proc/modules
> sg 26460 0 (unused)
>
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> $ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(set)
> 0376-0376 : ide1
> 0378-037a : parport0
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> 0400-040f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0800-08ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0c00-0c7f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0cf8-0cff : PCI conf1
> 9000-9fff : PCI Bus #01
> b800-b8ff : Lite-On Communications Inc LNE100TX (#2)
> b800-b8ff : tulip
> bc00-bcff : Lite-On Communications Inc LNE100TX
> bc00-bcff : tulip
> c000-c01f : VIA Technologies, Inc. USB
> c000-c01f : usb-uhci
> c400-c41f : VIA Technologies, Inc. USB (#2)
> c400-c41f : usb-uhci
> c800-c803 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
> c800-c803 : via82cxxx_audio
> cc00-cc03 : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
> cc00-cc03 : via82cxxx_audio
> d000-d0ff : VIA Technologies, Inc. VT82C686 AC97 Audio Controller
> d000-d0ff : via82cxxx_audio
> ffa0-ffaf : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
>
> $ cat /proc/iomem
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-27feffff : System RAM
> 00100000-0036fe16 : Kernel code
> 0036fe17-004443c3 : Kernel data
> 27ff0000-27ff7fff : ACPI Tables
> 27ff8000-27ffffff : ACPI Non-volatile Storage
> d9b00000-ddbfffff : PCI Bus #01
> da000000-dbffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
> ddd00000-dfdfffff : PCI Bus #01
> de000000-deffffff : nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
> dffffe00-dffffeff : Lite-On Communications Inc LNE100TX (#2)
> dffffe00-dffffeff : tulip
> dfffff00-dfffffff : Lite-On Communications Inc LNE100TX
> dfffff00-dfffffff : tulip
> e0000000-e3ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
> ffff0000-ffffffff : reserved
>
> [7.5.] PCI information ('lspci -vvv' as root)
> # lspci -vvv
> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 8
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: ddd00000-dfdfffff
> Prefetchable memory behind bridge: d9b00000-ddbfffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
> Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 4: I/O ports at ffa0 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin D routed to IRQ 9
> Region 4: I/O ports at c000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin D routed to IRQ 9
> Region 4: I/O ports at c400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
> Subsystem: Giga-byte Technology Onboard Audio
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin C routed to IRQ 10
> Region 0: I/O ports at d000 [size=256]
> Region 1: I/O ports at cc00 [size=4]
> Region 2: I/O ports at c800 [size=4]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
> Subsystem: Netgear FA310TX
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at bc00 [size=256]
> Region 1: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at dff80000 [disabled] [size=256K]
>
> 0000:00:0f.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
> Subsystem: Netgear FA310TX
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at b800 [size=256]
> Region 1: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at dff40000 [disabled] [size=256K]
>
> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 11) (prog-if 00 [VGA])
> Subsystem: Creative Labs: Unknown device 103a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at da000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at dfdf0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
> $ cat /proc/scsi/scsi
> Attached devices: none
>
> [7.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
> ls -lR /proc does not trigger an oops.
>
> [X.] Other notes, patches, fixes, workarounds:
> I am not familiar with this aspect of linux, but 2.4.33.3's proc_pid_stat()
> appears to be identical. It also appears there have been several bug fixes
> in 2.6 (including race condition corrections); perhaps there are issues
> fixed in 2.6 but whose patches not been backported to 2.4?
The code in 2.6 is quite different. Your problem here does not seem related
to locking, because you can repeat it at will. I rather think that one of
your tasks is going ill. I looked at the oops and compared with the code.
In your case, the task->sig pointer equals 0x170, which is clearly wrong.
I suspect it's a kernel thread which goes mad, because user tasks should
not be able to write anything there.
When this problem happens, could you try to identify the wrong task ?
Basically, this should help :
# cd /proc
# for i in [0-9]*; do
echo "Trying pid $i..."
if ! cat $i/stat > /dev/null; then
echo "!!! BAD PID : $i !!!"
fi
done
If it is a kernel thread (low pid), you will not be able to find
which one until you reboot, because the only other entry which
might return its name is "status" which also uses collect_sigign_sigcatch().
Otherwise, it is easy to find the full command line of the process :
# echo $(tr '\000' ' ' < /proc/$BADPID/cmdline)
> The machine in question become unstable, about a year ago, when an additional
> harddrive and ram were added and the kernel upgraded from 2.2.19 (with ext3)
> to 2.4.31. There, there may certainly be a hardware issue playing a role
> here. However, since the problem is completely reliable once it starts within
> a given boot and occurs, given time, across reboots, it seems likely
> that a software bug may be involved.
To be honnest, I'm skeptical. This is the first report of such an easily
reproductible problem. Since you added RAM in your system, I would strongly
suggest passing memtest on it during a full night. Random bit flips might
turn a null into non-null, causing some unexpected code paths to be taken.
> --
> Chris Frost | <http://www.frostnet.net/chris/>
> -------------+----------------------------------
> Public PGP Key:
> Email [email protected] with the subject "retrieve pgp key"
> or visit <http://www.frostnet.net/chris/about/pgp_key.phtml>
Regards,
Willy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]