Re: (Another?) Seagate / Sil3112a problem...

[Philippe Grenard <philippe.grenard@m4x.org>]

Ok,

here are more informations, and i believe now this is not a software problem 
of any kind...

3 things i remarked : 

1/ when changing cables, i still had problems with ata1 : for me, this would 
sound like the controller "ata1" has maybe issues, as ata2 worked before...
2/ when swapping cables, I had problems with ata2 too : this would mean the 
cable had also some issues...
3/ maybe, (but i'm not sure...) the drive needs its own power cable : I mean, 
when the power cable , which contains a "sata plug" and a "ide plug" is 
connected to sata alone, it seems to work better than when the cable is 
connected to both a ide and a sata drive , or the graphic card and the sata 
drive....
since I got a 430 W True Power PSU from Antec, i don't really believe the 
problem is a power problem, but maybe it was too much on one cable??

I'll stop at it, since it seems to work fine, with a config like "1drive -  
ata2 - own power cable". If I go into more troubles, i will try more tests 
and if I arrive to any kind of conclusion, i will let you know about it!

thanks again for the help,

Philippe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/