[PATCH 0/6] Sizing zones and holes in an architecture independent manner V9

[Mel Gorman <mel@csn.ul.ie>]

This is V9 of the patchset to size zones and memory holes in an
architecture-independent manner. It booted successfully on 5 different
machines (arches were x86, x86_64, ppc64 and ia64) in a number of different
configurations and successfully built a kernel. If it fails on any machine,
booting with loglevel=8 and the console log should tell me what went wrong.

Changelog since V8
o Rebase to 2.6.17-rc4-mm1
o Make dma_reserve static
o Use enumerated zone numbers

Changelog since V7
o Rebase to 2.6.17-mm6
o Account for mem_map as a memory hole
o Adjust mem_map when arch independent zone-sizing is used and PFN 0 is in
  a memory hole not accounted for by ARCH_PFN_OFFSET

Changelog since V6
o MAX_ACTIVE_REGIONS is really maximum active regions, not MAX_ACTIVE_REGIONS-1
o MAX_ACTIVE_REGIONS is 256 unless the architecture specifically asks for
  a different number or MAX_NUMNODES is >= 32
o nr_nodemap_entries tracks the number of entries rather than terminating with
  end_pfn == 0
o Add number of documentation-related comments. Functions exposed by headers
  may potentially be picked up by kerneldoc
o Changed misleading zone_present_pages_in_node() name to
  zone_spanned_pages_in_node()
o Be a bit more verbose to help debugging when things go wrong.
o On x86_64, end_pfn_map now gets updated properly or ACPI tables get "lost"
o Signoffs added to patches 1 and 5 by Bob Picco related to contributions,
  fixes and reviews

Changelog since V5
o Add a missing #include to mm/mem_init.c
o Drop the verbose debugging part of the set
o Report active range registration when loglevel is set for KERN_DEBUG

Changelog since V4
o Rebase to 2.6.17-rc3-mm1
o Calculate holes on x86 with SRAT correctly

Changelog since V3
o Rebase to 2.6.17-rc2
o Allow the active regions to be cleared. Needed by x86_64 when it decides
  the SRAT table is bad half way through the registering of active regions
o Fix for flatmem x86_64 machines booting

Changelog since V2
o Fix a bug where holes in lower zones get double counted
o Catch the case where a new range is registered that is within an range
o Catch the case where a zone boundary is within a hole
o Use the EFI map for registering ranges on x86_64+numa
o On IA64+NUMA, add the active ranges before rounding for granules
o On x86_64, remove e820_hole_size and e820_bootmem_free and use
  arch-independent equivalents
o On x86_64, remove the map walk in e820_end_of_ram()
o Rename memory_present_with_active_regions, name ambiguous
o Add absent_pages_in_range() for arches to call

Changelog since V1
o Correctly convert virtual and physical addresses to PFNs on ia64
o Correctly convert physical addresses to PFN on older ppc 
o When add_active_range() is called with overlapping pfn ranges, merge them
o When a zone boundary occurs within a memory hole, account correctly
o Minor whitespace damage cleanup
o Debugging patch temporarily included

At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate
zone sizes and holes in each architecture is very similar.  Some of this
zone and hole sizing code is difficult to read for no good reason. This
set of patches eliminates the similar-looking architecture-specific code.

The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas
have been discovered, free_area_init_nodes() is called to initialise
the pgdat and zones. The zone sizes and holes are then calculated in an
architecture independent manner.

Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
	It adjusts the watermarks slightly

Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged
on IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.

There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory
holes but the architecture-independent code accounts the memory as present.

The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for
zone and hole sizing but I lack the hardware to test on.

Additional credit;
	Dave Hansen for the initial suggestion and comments on early patches
	Andy Whitcroft for reviewing early versions and catching numerous
		errors
	Tony Luck for testing and debugging on IA64
	Bob Picco for fixing bugs related to pfn registration, reviewing a
		number of patch revisions, providing a number of suggestions
		on future direction and testing heavily
	Jack Steiner and Robin Holt for testing on IA64 and clarifying
		issues related to memory holes
	Yasunori for testing on IA64
	Andi Kleen for reviewing and feeding back about x86_64
	Christian Kujau for providing valuable information related to ACPI
		problems on x86_64 and testing potential fixes
-- 
-- 
Mel Gorman
Part-time Phd Student                          Linux Technology Center
University of Limerick                         IBM Dublin Software Lab
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/