Re: Random scsi disk disappearing

[Matthew Wilcox <matthew@wil.cx>]

On Thu, Aug 17, 2006 at 02:55:58PM +0400, Michael Tokarev wrote:
> From time to time, an scsi disk just disappears from
> the bus, without any [error] messages whatsoever.
> The only relevant stuff in dmesg is logging from md
> (softraid) layer, about "error updating superblock"
> and later "giving up and removing the disk from the
> array" - not even error number.
> 
> When I try to access such a disk (/dev/sdX device),
> I got "No such device or address" error back.
> 
> It's still listed in /sys/block and /proc/scsi/scsi,
> but any access to the device gives this error.
> 
> But the disk is here, I know it is.  Deleting it from
> kernel:
> 
>   echo y > /sys/block/sdX/device/delete
> 
> and adding it back:
> 
>   echo scsi add-single-device x y z > /proc/scsi/scsi
> 
> works just fine, linux finds "new" scsi device and it
> happily works again.
> 
> This happens on alot of different machines, with different
> disk drives (ok, most of them are from Seagate, but not
> all).  I can't say for sure that it happens on different
> scsi controllers - at least majority of them are adaptecs,
> using aic7xxx or aix79xx driver.
> 
> I suspected the disks are too hot - nope, according to
> smartctrl, the themp is far from bad (typically about
> 25..35 Celsius, and the themperature is not changing much).
> Bad cables, bad power supply, bad anything else?  Not sure
> either, at least I can't guess more: the machines are
> really different, some has good, under-loaded power supplies
> (and server chassis/motherboards/allthestuff) some has less
> good ones - makes no difference.  And the thing is - having
> in mind really sporadic disappearing, not depending on current
> load, time of day (eg, during nights, there's no one on site
> so no one to touch cables etc), ...  Well, I just can't think
> of any reason, at all.
> 
> But one thing bothers me most: there's NO LOGGING from scsi
> layer.  None, zero, not at all.
> 
> Has anyone else seen something similar?  Any pointers on how
> to debug the issue?

I'd recommend turning on scsi logging; it might give you a clue about
which bit of scanning is failing to work properly.

Try booting with scsi_mod.scsi_logging_level = 448 (I think I have that
number right; 7 shifted left by 6) and then you can compare failing and
non-failing runs and see if there's any difference.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/