Re: [PATCH] OMAP: I2C driver for TI OMAP boards #3

[Tony Lindgren <tony@atomide.com>]

* Jean Delvare <khali@linux-fr.org> [060810 11:30]:
> Hi Tony, Komal,
> 
> > Hmmm, this sounds like a bug somewhere. TRM for 5912 says the I2C clock
> > must be prescaled to be between 7 - 12 MHz [1]. The XOR input clock is
> > typically 12, 13 or 19.2 MHz. So we should have code that produces:
> > 
> > XOR Mhz	Divider	Prescaler
> > 12		1	0
> > 13		2	1
> > 19.2		2	1
> 
> Not that 13 MHz cannot actually be prescaled between 7 and 12 MHz, no
> matter how you look at it.

True :) But that's what the docs say..
 
> > Then again the original old code produces something different too [2]...
> > 
> > I suspect the original code had some hw workarounds and and later code
> > may have a conversion bug somewhere :)
> > 
> > I suggest we keep the code as is for now since it's known to work on
> > all omaps, and then submit a follow-up patch later once we have
> > verified that that code based on the TRM works on all omaps.
> 
> I've now taken Komal's patch (#4). Here is a proposed patch which brings
> the prescaler computation formula in line with your comment and table
> above. It could be applied on top of Komal's patch unless it causes a
> problem on some of the OMAP systems. For XOR = 13 MHz, it changes the
> prescaler from 0 to 1. For XOR = 19.2 MHz it changes the prescaler from
> 2 to 1.

OK cool. As far as I'm concerned, I'm fine with it too:
Signed-off-by: Tony Lindgren <tony@atomide.com>
 
> I don't have any hardware to test it, though. If it happens to be
> better to be slightly over 12 MHz than slightly below 7 MHz, the
> "> 12000000" condition below can be replaced with "> 14000000".

Thanks, we'll test it on various omaps and let you know if it works.

Tony
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/