Re: 3ware 9550 using 3w-9xxx driver lockups ?

["Jeff V. Merkey" <jmerkey@wolfmountaingroup.com>]

adam radford wrote:

> Looks to me like you have a bad drive (or several bad drives, if
> other drives on other machines are reallocating sectors as well).
>
> Many reallocated sectors could be a sign that your drive is about to 
> die...
> Are you booting off this disk?
>
> Have you run smartmontools on those bad disks?
>
> You fail to mention your raid configuration.
>
> Are you running the latest 3ware firmware for that controller?  There
> is a Linux specific userspace firmware update utility.
>
> Also, this topic is better served on the linux-scsi email list.
>
> -Adam
>
> On 8/8/06, Andy Davidson <andy@nosignal.org> wrote:
>
> > Hi,
> >
> > One of our servers locked up (no kernel panic, but no response to
> > console/network) with the following output on console :
> >
> > Aug  8 14:10:34 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x4383A7F.
> > Aug  8 14:10:39 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x438C4D9.
> > Aug  8 14:10:41 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x438C4DC.
> > Aug  8 14:10:47 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x438FB34.
> > Aug  8 14:10:49 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x438FB36.
> > Aug  8 14:10:52 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x439051D.
> > Aug  8 14:11:08 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
> > (0x04:0x0023): Sector repair completed:port=1,LBA=0x4378D8A.
> >
> > I'd put this down to bad hardware until an identically spec'd machine
> > (with fresh disks) did the same thing.
> >
> >
> > Anyone else noticed any issues using the newer 3-ware 9550S cards with
> > the 3w-9xxx driver ?
> >
> >
> > Other details :
> > Linux how-mail-1 2.6.16-2-686-smp #1 SMP Sat Jul 15 22:33:00 UTC 2006 
> > i686
> >
> > from lspci:
> > 03:03.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID
> >
> >
> > 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
> > ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 24 (level, low) -> IRQ 177
> > scsi0 : 3ware 9000 Storage Controller
> > 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda300000,
> > IRQ: 177.
> > 3w-9xxx: scsi0: Firmware FE9X 3.01.01.028, BIOS BE9X 3.01.00.024, Ports:
> > 4. Vendor: AMCC      Model: 9550SX-4LP DISK
> > Rev: 3.01 Type:   Direct-Access                      ANSI SCSI 
> > revision: 03f
> >
> >
> > We'd welcome any help ?
> >
> > Thanks,
> > Andy
> > -
> > To unsubscribe from this list: send the line "unsubscribe 
> > linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
Adam,

Have him check the cables as well unless he using the multi-lane 
controller.  I see this a lot with loose ATA cables
on units, but since we moved over to the multi-lane architecture -- 
great work on the multi-lane version of the adapters, BTW.
He should also check is he's getting -2 bio errors.  I see -2 bio errors 
in parallel with this if its a bad cable.

Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/