Re: 3ware 9550 using 3w-9xxx driver lockups ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looks to me like you have a bad drive (or several bad drives, if
other drives on other machines are reallocating sectors as well).

Many reallocated sectors could be a sign that your drive is about to die...
Are you booting off this disk?

Have you run smartmontools on those bad disks?

You fail to mention your raid configuration.

Are you running the latest 3ware firmware for that controller?  There
is a Linux specific userspace firmware update utility.

Also, this topic is better served on the linux-scsi email list.

-Adam

On 8/8/06, Andy Davidson <[email protected]> wrote:


Hi,

One of our servers locked up (no kernel panic, but no response to
console/network) with the following output on console :

Aug  8 14:10:34 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x4383A7F.
Aug  8 14:10:39 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x438C4D9.
Aug  8 14:10:41 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x438C4DC.
Aug  8 14:10:47 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x438FB34.
Aug  8 14:10:49 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x438FB36.
Aug  8 14:10:52 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x439051D.
Aug  8 14:11:08 how-mail-1 kernel: 3w-9xxx: scsi0: AEN: WARNING
(0x04:0x0023): Sector repair completed:port=1,LBA=0x4378D8A.

I'd put this down to bad hardware until an identically spec'd machine
(with fresh disks) did the same thing.


Anyone else noticed any issues using the newer 3-ware 9550S cards with
the 3w-9xxx driver ?


Other details :
Linux how-mail-1 2.6.16-2-686-smp #1 SMP Sat Jul 15 22:33:00 UTC 2006 i686

from lspci:
03:03.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID


3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 24 (level, low) -> IRQ 177
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda300000,
IRQ: 177.
3w-9xxx: scsi0: Firmware FE9X 3.01.01.028, BIOS BE9X 3.01.00.024, Ports:
4. Vendor: AMCC      Model: 9550SX-4LP DISK
Rev: 3.01 Type:   Direct-Access                      ANSI SCSI revision: 03f


We'd welcome any help ?

Thanks,
Andy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux