raid10d has toooo many nested block, so take the fix_read_error
functionality out into a separate function.
Signed-off-by: Neil Brown <[email protected]>
### Diffstat output
./drivers/md/raid10.c | 213 ++++++++++++++++++++++++++------------------------
1 file changed, 115 insertions(+), 98 deletions(-)
diff .prev/drivers/md/raid10.c ./drivers/md/raid10.c
--- .prev/drivers/md/raid10.c 2006-07-31 17:23:57.000000000 +1000
+++ ./drivers/md/raid10.c 2006-07-31 17:24:34.000000000 +1000
@@ -1350,9 +1350,119 @@ static void recovery_request_write(mddev
*
* 1. Retries failed read operations on working mirrors.
* 2. Updates the raid superblock when problems encounter.
- * 3. Performs writes following reads for array syncronising.
+ * 3. Performs writes following reads for array synchronising.
*/
+static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio)
+{
+ int sect = 0; /* Offset from r10_bio->sector */
+ int sectors = r10_bio->sectors;
+ mdk_rdev_t*rdev;
+ while(sectors) {
+ int s = sectors;
+ int sl = r10_bio->read_slot;
+ int success = 0;
+ int start;
+
+ if (s > (PAGE_SIZE>>9))
+ s = PAGE_SIZE >> 9;
+
+ rcu_read_lock();
+ do {
+ int d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ success = sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9,
+ conf->tmppage, READ);
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ if (success)
+ break;
+ }
+ sl++;
+ if (sl == conf->copies)
+ sl = 0;
+ } while (!success && sl != r10_bio->read_slot);
+ rcu_read_unlock();
+
+ if (!success) {
+ /* Cannot read from anywhere -- bye bye array */
+ int dn = r10_bio->devs[r10_bio->read_slot].devnum;
+ md_error(mddev, conf->mirrors[dn].rdev);
+ break;
+ }
+
+ start = sl;
+ /* write it back and re-read */
+ rcu_read_lock();
+ while (sl != r10_bio->read_slot) {
+ int d;
+ if (sl==0)
+ sl = conf->copies;
+ sl--;
+ d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ atomic_add(s, &rdev->corrected_errors);
+ if (sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9, conf->tmppage, WRITE)
+ == 0)
+ /* Well, this device is dead */
+ md_error(mddev, rdev);
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ }
+ }
+ sl = start;
+ while (sl != r10_bio->read_slot) {
+ int d;
+ if (sl==0)
+ sl = conf->copies;
+ sl--;
+ d = r10_bio->devs[sl].devnum;
+ rdev = rcu_dereference(conf->mirrors[d].rdev);
+ if (rdev &&
+ test_bit(In_sync, &rdev->flags)) {
+ char b[BDEVNAME_SIZE];
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ if (sync_page_io(rdev->bdev,
+ r10_bio->devs[sl].addr +
+ sect + rdev->data_offset,
+ s<<9, conf->tmppage, READ) == 0)
+ /* Well, this device is dead */
+ md_error(mddev, rdev);
+ else
+ printk(KERN_INFO
+ "raid10:%s: read error corrected"
+ " (%d sectors at %llu on %s)\n",
+ mdname(mddev), s,
+ (unsigned long long)sect+
+ rdev->data_offset,
+ bdevname(rdev->bdev, b));
+
+ rdev_dec_pending(rdev, mddev);
+ rcu_read_lock();
+ }
+ }
+ rcu_read_unlock();
+
+ sectors -= s;
+ sect += s;
+ }
+}
+
static void raid10d(mddev_t *mddev)
{
r10bio_t *r10_bio;
@@ -1413,105 +1523,12 @@ static void raid10d(mddev_t *mddev)
* This is all done synchronously while the array is
* frozen.
*/
- int sect = 0; /* Offset from r10_bio->sector */
- int sectors = r10_bio->sectors;
- freeze_array(conf);
- if (mddev->ro == 0) while(sectors) {
- int s = sectors;
- int sl = r10_bio->read_slot;
- int success = 0;
-
- if (s > (PAGE_SIZE>>9))
- s = PAGE_SIZE >> 9;
-
- rcu_read_lock();
- do {
- int d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- success = sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9,
- conf->tmppage, READ);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- if (success)
- break;
- }
- sl++;
- if (sl == conf->copies)
- sl = 0;
- } while (!success && sl != r10_bio->read_slot);
- rcu_read_unlock();
-
- if (success) {
- int start = sl;
- /* write it back and re-read */
- rcu_read_lock();
- while (sl != r10_bio->read_slot) {
- int d;
- if (sl==0)
- sl = conf->copies;
- sl--;
- d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- atomic_add(s, &rdev->corrected_errors);
- if (sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9, conf->tmppage, WRITE) == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- sl = start;
- while (sl != r10_bio->read_slot) {
- int d;
- if (sl==0)
- sl = conf->copies;
- sl--;
- d = r10_bio->devs[sl].devnum;
- rdev = rcu_dereference(conf->mirrors[d].rdev);
- if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
- if (sync_page_io(rdev->bdev,
- r10_bio->devs[sl].addr +
- sect + rdev->data_offset,
- s<<9, conf->tmppage, READ) == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- else
- printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
- mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b));
-
- rdev_dec_pending(rdev, mddev);
- rcu_read_lock();
- }
- }
- rcu_read_unlock();
- } else {
- /* Cannot read from anywhere -- bye bye array */
- md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);
- break;
- }
- sectors -= s;
- sect += s;
+ if (mddev->ro == 0) {
+ freeze_array(conf);
+ fix_read_error(conf, mddev, r10_bio);
+ unfreeze_array(conf);
}
- unfreeze_array(conf);
-
bio = r10_bio->devs[r10_bio->read_slot].bio;
r10_bio->devs[r10_bio->read_slot].bio =
mddev->ro ? IO_BLOCKED : NULL;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
