Re: why does nforce pata controller need ide0=ata66 ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ar Gwe, 2006-07-21 am 16:30 +0200, ysgrifennodd Jimmy Jazz:
> What puzzles me is the kernel message: ide_setup: ide0=ata66 -- OBSOLETE
> OPTION, WILL BE REMOVED SOON!
> 
> So, i guess, if the option will be removed soon, it is no more necessary
> to worry about it because PATA drives are "end of life" or the option
> will certainly (hopefully) be replaced with a new one ;).

The current plan is that drivers/ide goes away and libata takes over.

> Would it be a way in the future to make ata66 drives and over work at
> their nominal speed when the chipset capabilities are not well
> recognized by the kernel driver ?

They should always be correctly detected.

> Have i simply misconfigured anything ?

Probably not. Make sure the cable itself is the right way around and can
you also send me an lspci -vxxx, as that will let me see the cable and
udma setup bits on your machine and investigate further.

Alan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux