Please review which of these changes do make sense and which do
conflict with pending patches.
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/net/e1000/e1000_hw.c | 89 ++++++++++++++++++++++++---------
drivers/net/e1000/e1000_hw.h | 32 -----------
drivers/net/e1000/e1000_main.c | 2
3 files changed, 67 insertions(+), 56 deletions(-)
--- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.h.old 2006-07-06 21:17:20.000000000 +0200
+++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.h 2006-07-06 21:57:18.000000000 +0200
@@ -323,13 +323,8 @@
int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
int32_t e1000_phy_reset(struct e1000_hw *hw);
void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
-int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
-int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
-int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
-int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
-int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
/* EEPROM Functions */
int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
@@ -400,13 +395,8 @@
int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
int32_t e1000_read_mac_addr(struct e1000_hw * hw);
-int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
-void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
-void e1000_release_software_flag(struct e1000_hw *hw);
-int32_t e1000_get_software_flag(struct e1000_hw *hw);
/* Filters (multicast, vlan, receive) */
-void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr);
void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value);
void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index);
@@ -431,31 +421,9 @@
void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
/* Port I/O is only supported on 82544 and newer */
-uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port);
-uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
-void e1000_enable_pciex_master(struct e1000_hw *hw);
int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
-int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
-void e1000_release_software_semaphore(struct e1000_hw *hw);
int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
-int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
-
-int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
- uint8_t *data);
-int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
- uint8_t byte);
-int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
- uint8_t byte);
-int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
- uint16_t *data);
-int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
- uint32_t size, uint16_t *data);
-int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
- uint16_t words, uint16_t *data);
-int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
- uint16_t words, uint16_t *data);
-int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
#define E1000_READ_REG_IO(a, reg) \
--- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.c.old 2006-07-06 21:16:17.000000000 +0200
+++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.c 2006-07-06 21:39:03.000000000 +0200
@@ -105,6 +105,33 @@
uint16_t duplex);
static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw,
+ uint32_t segment);
+static int32_t e1000_get_software_flag(struct e1000_hw *hw);
+static int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
+static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+ uint16_t words, uint16_t *data);
+static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+ uint8_t* data);
+static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+ uint16_t *data);
+static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
+ uint16_t *data);
+static void e1000_release_software_flag(struct e1000_hw *hw);
+static void e1000_release_software_semaphore(struct e1000_hw *hw);
+static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw,
+ uint32_t no_snoop);
+static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw,
+ uint32_t index, uint8_t byte);
+static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+ uint16_t words, uint16_t *data);
+static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+ uint8_t data);
+static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
+ uint16_t data);
+
/* IGP cable length table */
static const
uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
@@ -3233,7 +3260,7 @@
return data;
}
-int32_t
+static int32_t
e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
{
uint32_t swfw_sync = 0;
@@ -3277,7 +3304,7 @@
return E1000_SUCCESS;
}
-void
+static void
e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
{
uint32_t swfw_sync;
@@ -3575,7 +3602,7 @@
return E1000_SUCCESS;
}
-int32_t
+static int32_t
e1000_read_kmrn_reg(struct e1000_hw *hw,
uint32_t reg_addr,
uint16_t *data)
@@ -3608,7 +3635,7 @@
return E1000_SUCCESS;
}
-int32_t
+static int32_t
e1000_write_kmrn_reg(struct e1000_hw *hw,
uint32_t reg_addr,
uint16_t data)
@@ -3839,7 +3866,7 @@
*
* hw - struct containing variables accessed by shared code
******************************************************************************/
-int32_t
+static int32_t
e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
{
int32_t ret_val;
@@ -4086,7 +4113,7 @@
* hw - Struct containing variables accessed by shared code
* phy_info - PHY information structure
******************************************************************************/
-int32_t
+static int32_t
e1000_phy_ife_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info)
{
@@ -5643,6 +5670,7 @@
* for the first 15 multicast addresses, and hashes the rest into the
* multicast table.
*****************************************************************************/
+#if 0
void
e1000_mc_addr_list_update(struct e1000_hw *hw,
uint8_t *mc_addr_list,
@@ -5719,6 +5747,7 @@
}
DEBUGOUT("MC Update Complete\n");
}
+#endif /* 0 */
/******************************************************************************
* Hashes an address to determine its location in the multicast table
@@ -6587,6 +6616,7 @@
* hw - Struct containing variables accessed by shared code
* offset - offset to read from
*****************************************************************************/
+#if 0
uint32_t
e1000_read_reg_io(struct e1000_hw *hw,
uint32_t offset)
@@ -6597,6 +6627,7 @@
e1000_io_write(hw, io_addr, offset);
return e1000_io_read(hw, io_data);
}
+#endif /* 0 */
/******************************************************************************
* Writes a value to one of the devices registers using port I/O (as opposed to
@@ -7909,6 +7940,7 @@
* returns: - none.
*
***************************************************************************/
+#if 0
void
e1000_enable_pciex_master(struct e1000_hw *hw)
{
@@ -7923,6 +7955,7 @@
ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
E1000_WRITE_REG(hw, CTRL, ctrl);
}
+#endif /* 0 */
/*******************************************************************************
*
@@ -8148,7 +8181,7 @@
* E1000_SUCCESS at any other case.
*
***************************************************************************/
-int32_t
+static int32_t
e1000_get_software_semaphore(struct e1000_hw *hw)
{
int32_t timeout = hw->eeprom.word_size + 1;
@@ -8183,7 +8216,7 @@
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
-void
+static void
e1000_release_software_semaphore(struct e1000_hw *hw)
{
uint32_t swsm;
@@ -8265,7 +8298,7 @@
* returns: E1000_SUCCESS
*
*****************************************************************************/
-int32_t
+static int32_t
e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
{
uint32_t gcr_reg = 0;
@@ -8306,7 +8339,7 @@
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
-int32_t
+static int32_t
e1000_get_software_flag(struct e1000_hw *hw)
{
int32_t timeout = PHY_CFG_TIMEOUT;
@@ -8345,7 +8378,7 @@
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
-void
+static void
e1000_release_software_flag(struct e1000_hw *hw)
{
uint32_t extcnf_ctrl;
@@ -8369,6 +8402,7 @@
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
+#if 0
int32_t
e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
{
@@ -8388,6 +8422,7 @@
return ret_val;
}
+#endif /* 0 */
/***************************************************************************
*
@@ -8397,6 +8432,7 @@
* hw: Struct containing variables accessed by shared code
*
***************************************************************************/
+#if 0
int32_t
e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
{
@@ -8416,6 +8452,7 @@
return ret_val;
}
+#endif /* 0 */
/******************************************************************************
* Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
@@ -8426,7 +8463,7 @@
* data - word read from the EEPROM
* words - number of words to read
*****************************************************************************/
-int32_t
+static int32_t
e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
uint16_t *data)
{
@@ -8482,7 +8519,7 @@
* words - number of words to write
* data - words to write to the EEPROM
*****************************************************************************/
-int32_t
+static int32_t
e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
uint16_t *data)
{
@@ -8529,7 +8566,7 @@
*
* hw - The pointer to the hw structure
****************************************************************************/
-int32_t
+static int32_t
e1000_ich8_cycle_init(struct e1000_hw *hw)
{
union ich8_hws_flash_status hsfsts;
@@ -8596,7 +8633,7 @@
*
* hw - The pointer to the hw structure
****************************************************************************/
-int32_t
+static int32_t
e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
{
union ich8_hws_flash_ctrl hsflctl;
@@ -8631,7 +8668,7 @@
* size - Size of data to read, 1=byte 2=word
* data - Pointer to the word to store the value read.
*****************************************************************************/
-int32_t
+static int32_t
e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
uint32_t size, uint16_t* data)
{
@@ -8710,7 +8747,7 @@
* size - Size of data to read, 1=byte 2=word
* data - The byte(s) to write to the NVM.
*****************************************************************************/
-int32_t
+static int32_t
e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
uint16_t data)
{
@@ -8785,7 +8822,7 @@
* index - The index of the byte to read.
* data - Pointer to a byte to store the value read.
*****************************************************************************/
-int32_t
+static int32_t
e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
{
int32_t status = E1000_SUCCESS;
@@ -8808,7 +8845,7 @@
* index - The index of the byte to write.
* byte - The byte to write to the NVM.
*****************************************************************************/
-int32_t
+static int32_t
e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
{
int32_t error = E1000_SUCCESS;
@@ -8839,7 +8876,7 @@
* index - The index of the byte to read.
* data - The byte to write to the NVM.
*****************************************************************************/
-int32_t
+static int32_t
e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
{
int32_t status = E1000_SUCCESS;
@@ -8857,7 +8894,7 @@
* index - The starting byte index of the word to read.
* data - Pointer to a word to store the value read.
*****************************************************************************/
-int32_t
+static int32_t
e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
{
int32_t status = E1000_SUCCESS;
@@ -8872,6 +8909,7 @@
* index - The starting byte index of the word to read.
* data - The word to write to the NVM.
*****************************************************************************/
+#if 0
int32_t
e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
{
@@ -8879,6 +8917,7 @@
status = e1000_write_ich8_data(hw, index, 2, data);
return status;
}
+#endif /* 0 */
/******************************************************************************
* Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
@@ -8887,7 +8926,7 @@
* hw - pointer to e1000_hw structure
* segment - 0 for first segment, 1 for second segment, etc.
*****************************************************************************/
-int32_t
+static int32_t
e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
{
union ich8_hws_flash_status hsfsts;
@@ -8984,6 +9023,7 @@
* hw: Struct containing variables accessed by shared code
*
*****************************************************************************/
+#if 0
int32_t
e1000_duplex_reversal(struct e1000_hw *hw)
{
@@ -9012,8 +9052,9 @@
return ret_val;
}
+#endif /* 0 */
-int32_t
+static int32_t
e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
uint32_t cnf_base_addr, uint32_t cnf_size)
{
@@ -9047,7 +9088,7 @@
}
-int32_t
+static int32_t
e1000_init_lcd_from_nvm(struct e1000_hw *hw)
{
uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
--- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_main.c.old 2006-07-06 21:57:45.000000000 +0200
+++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_main.c 2006-07-06 21:58:01.000000000 +0200
@@ -4387,11 +4387,13 @@
pci_write_config_word(adapter->pdev, reg, *value);
}
+#if 0
uint32_t
e1000_io_read(struct e1000_hw *hw, unsigned long port)
{
return inl(port);
}
+#endif /* 0 */
void
e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
