RE: Please pull from 'for_paulus' branch of powerpc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Jun 28, 2006, at 10:33 PM, Zhang Wei-r63237 wrote:
> >> On Jun 28, 2006, at 1:26 AM, Zhang Wei-r63237 wrote:
> >>
> >>> Hi, Kumar,
> >>>
> >>> Why moving these codes from pci.c to mpc86xx_hpcn.c? It's
> >> not must be.
> >>> These functions relate to PCI device of MPC8641D HPCn platform.
> >>> And we can also see the 'DECLARE_PCI_FIXUP_HEADER()' 
> declaration in 
> >>> pci.c of Powermac platform.
> >>
> >> The point for moving is 86xx/pci.c should apply to all 
> 86xx systems, 
> >> not just the HPCn system.
> >>
> >> - kumar
> >
> > The codes of moving is for PCI devices, it's for HPCn 
> system now, but 
> > it's also fit for the same PCI chips in the other 86xx 
> system and the 
> > same chip should keep the same setting in 86xx platforms, I 
> think so.
> >
> > Even though other 86xx platforms have no these PCI chips, 
> these codes 
> > will not take effect.
> 
> Its code bloat for systems that dont need it.

Yes, but it will make the codes more general. 
Otherwise it will prevents using the same kernel image on another platform.

How to do if the other 86xx platform has the same ships? Add the same code to mpc86xx_xxx.c? It will also bloat the source tree.

> 
> > And we can also see the similar solution in pSeries and PowerMac 
> > platforms pci.c file. The function 'fixup_winbond_82c105' in 
> > pseries/pci.c is for the Winbond 82c105 IDE controller on p610.
> > (pSeries have only p610? :-D ) The function 'fixup_k2_sata' in 
> > powermac/pci.c is for K2-SATA. (K2-SATA chip is in all PowerMac 
> > machine? ;-) )
> 
> Realize, powermac and pseries describe actual full systems, 
> not processor families like 86xx.
> 
Yes, but the powermac and pseries full systems also have different model and different chips set. 
And using processor families like 85xx, 86xx as powerpc platform sub-directory name is maybe not a good idea.

Thanks,
Zhang Wei

> > The moving will make the mpc86xx_hpcn.c more fat.
> 
> That's all relative.
> 
> - kumar
> 
> >
> > Thanks,
> > Zhang Wei
> >
> >>
> >>>> -----Original Message-----
> >>>> From: [email protected]
> >>>> [mailto:[email protected]
> >>>> g] On Behalf Of Kumar Gala
> >>>> Sent: Wednesday, June 28, 2006 2:01 PM
> >>>> To: Paul Mackerras
> >>>> Cc: [email protected]; [email protected]
> >>>> Subject: Please pull from 'for_paulus' branch of powerpc
> >>>>
> >>>> Please pull from 'for_paulus' branch of 
> >>>> master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git
> >>>>
> >>>> to receive the following updates:
> >>>>
> >>>>  arch/powerpc/kernel/cputable.c             |   12 --
> >>>>  arch/powerpc/platforms/86xx/mpc86xx.h      |    8 +
> >>>>  arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |  128
> >>>> +++++++++++++++++++++++++--
> >>>>  arch/powerpc/platforms/86xx/mpc86xx_smp.c  |    9 -
> >>>>  arch/powerpc/platforms/86xx/pci.c          |  136
> >>>> +----------------------------
> >>>>  include/asm-powerpc/mpc86xx.h              |    4
> >>>>  6 files changed, 138 insertions(+), 159 deletions(-)
> >>>>
> >>>> Kumar Gala:
> >>>>       powerpc: minor cleanups for mpc86xx
> >>>>
> >>>> diff --git a/arch/powerpc/kernel/cputable.c 
> >>>> b/arch/powerpc/kernel/cputable.c index 1c11488..abf7d42 100644
> >>>> --- a/arch/powerpc/kernel/cputable.c
> >>>> +++ b/arch/powerpc/kernel/cputable.c
> >>>> @@ -722,18 +722,6 @@ #if CLASSIC_PPC
> >>>>  		.oprofile_type		= PPC_OPROFILE_G4,
> >>>>  		.platform		= "ppc7450",
> >>>>  	},
> >>>> -        {       /* 8641 */
> >>>> -               .pvr_mask               = 0xffffffff,
> >>>> -               .pvr_value              = 0x80040010,
> >>>> -               .cpu_name               = "8641",
> >>>> -               .cpu_features           = CPU_FTRS_7447A,
> >>>> -               .cpu_user_features      = COMMON_USER |
> >>>> PPC_FEATURE_HAS_ALTIVEC_COMP,
> >>>> -               .icache_bsize           = 32,
> >>>> -               .dcache_bsize           = 32,
> >>>> -               .num_pmcs               = 6,
> >>>> -               .cpu_setup              = __setup_cpu_745x
> >>>> -        },
> >>>> -
> >>>>  	{	/* 82xx (8240, 8245, 8260 are all 603e cores) */
> >>>>  		.pvr_mask		= 0x7fff0000,
> >>>>  		.pvr_value		= 0x00810000,
> >>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h
> >>>> b/arch/powerpc/platforms/86xx/mpc86xx.h
> >>>> index e3c9e4f..2834462 100644
> >>>> --- a/arch/powerpc/platforms/86xx/mpc86xx.h
> >>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx.h
> >>>> @@ -15,11 +15,13 @@ #define __MPC86XX_H__
> >>>>   * mpc86xx_* files. Mostly for use by mpc86xx_setup().
> >>>>   */
> >>>>
> >>>> -extern int __init add_bridge(struct device_node *dev);
> >>>> +extern int add_bridge(struct device_node *dev);
> >>>>
> >>>> -extern void __init setup_indirect_pcie(struct
> >> pci_controller *hose,
> >>>> +extern int mpc86xx_exclude_device(u_char bus, u_char devfn);
> >>>> +
> >>>> +extern void setup_indirect_pcie(struct pci_controller *hose,
> >>>>  				       u32 cfg_addr, u32
> >>>> cfg_data); -extern void __init
> >>>> setup_indirect_pcie_nomap(struct pci_controller *hose,
> >>>> +extern void setup_indirect_pcie_nomap(struct 
> pci_controller *hose,
> >>>>  					     void 
> __iomem *cfg_addr,
> >>>>  					     void 
> __iomem *cfg_data);
> >>>>
> >>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> >>>> b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> >>>> index 483c21d..ac7f418 100644
> >>>> --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> >>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
> >>>> @@ -36,6 +36,7 @@ #include <asm/mpic.h>  #include
> >> <sysdev/fsl_soc.h>
> >>>>
> >>>>  #include "mpc86xx.h"
> >>>> +#include "mpc8641_hpcn.h"
> >>>>
> >>>>  #ifndef CONFIG_PCI
> >>>>  unsigned long isa_io_base = 0;
> >>>> @@ -186,17 +187,130 @@ mpc86xx_map_irq(struct pci_dev *dev, uns
> >>>>  	return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;  }
> >>>>
> >>>> +static void __devinit quirk_ali1575(struct pci_dev *dev) {
> >>>> +	unsigned short temp;
> >>>> +
> >>>> +	/*
> >>>> +	 * ALI1575 interrupts route table setup:
> >>>> +	 *
> >>>> +	 * IRQ pin   IRQ#
> >>>> +	 * PIRQA ---- 3
> >>>> +	 * PIRQB ---- 4
> >>>> +	 * PIRQC ---- 5
> >>>> +	 * PIRQD ---- 6
> >>>> +	 * PIRQE ---- 9
> >>>> +	 * PIRQF ---- 10
> >>>> +	 * PIRQG ---- 11
> >>>> +	 * PIRQH ---- 12
> >>>> +	 *
> >>>> +	 * interrupts for PCI slot0 -- PIRQA / PIRQB / 
> PIRQC / PIRQD
> >>>> +	 *                PCI slot1 -- PIRQB / PIRQC / 
> PIRQD / PIRQA
> >>>> +	 */
> >>>> +	pci_write_config_dword(dev, 0x48, 0xb9317542);
> >>>> +
> >>>> +	/* USB 1.1 OHCI controller 1, interrupt: PIRQE */
> >>>> +	pci_write_config_byte(dev, 0x86, 0x0c);
> >>>> +
> >>>> +	/* USB 1.1 OHCI controller 2, interrupt: PIRQF */
> >>>> +	pci_write_config_byte(dev, 0x87, 0x0d);
> >>>> +
> >>>> +	/* USB 1.1 OHCI controller 3, interrupt: PIRQH */
> >>>> +	pci_write_config_byte(dev, 0x88, 0x0f);
> >>>> +
> >>>> +	/* USB 2.0 controller, interrupt: PIRQ7 */
> >>>> +	pci_write_config_byte(dev, 0x74, 0x06);
> >>>> +
> >>>> +	/* Audio controller, interrupt: PIRQE */
> >>>> +	pci_write_config_byte(dev, 0x8a, 0x0c);
> >>>> +
> >>>> +	/* Modem controller, interrupt: PIRQF */
> >>>> +	pci_write_config_byte(dev, 0x8b, 0x0d);
> >>>> +
> >>>> +	/* HD audio controller, interrupt: PIRQG */
> >>>> +	pci_write_config_byte(dev, 0x8c, 0x0e);
> >>>> +
> >>>> +	/* Serial ATA interrupt: PIRQD */
> >>>> +	pci_write_config_byte(dev, 0x8d, 0x0b);
> >>>> +
> >>>> +	/* SMB interrupt: PIRQH */
> >>>> +	pci_write_config_byte(dev, 0x8e, 0x0f);
> >>>> +
> >>>> +	/* PMU ACPI SCI interrupt: PIRQH */
> >>>> +	pci_write_config_byte(dev, 0x8f, 0x0f);
> >>>> +
> >>>> +	/* Primary PATA IDE IRQ: 14
> >>>> +	 * Secondary PATA IDE IRQ: 15
> >>>> +	 */
> >>>> +	pci_write_config_byte(dev, 0x44, 0x3d);
> >>>> +	pci_write_config_byte(dev, 0x75, 0x0f);
> >>>> +
> >>>> +	/* Set IRQ14 and IRQ15 to legacy IRQs */
> >>>> +	pci_read_config_word(dev, 0x46, &temp);
> >>>> +	temp |= 0xc000;
> >>>> +	pci_write_config_word(dev, 0x46, temp);
> >>>> +
> >>>> +	/* Set i8259 interrupt trigger
> >>>> +	 * IRQ 3:  Level
> >>>> +	 * IRQ 4:  Level
> >>>> +	 * IRQ 5:  Level
> >>>> +	 * IRQ 6:  Level
> >>>> +	 * IRQ 7:  Level
> >>>> +	 * IRQ 9:  Level
> >>>> +	 * IRQ 10: Level
> >>>> +	 * IRQ 11: Level
> >>>> +	 * IRQ 12: Level
> >>>> +	 * IRQ 14: Edge
> >>>> +	 * IRQ 15: Edge
> >>>> +	 */
> >>>> +	outb(0xfa, 0x4d0);
> >>>> +	outb(0x1e, 0x4d1);
> >>>> +}
> >>>>
> >>>> -int
> >>>> -mpc86xx_exclude_device(u_char bus, u_char devfn)
> >>>> +static void __devinit quirk_uli5288(struct pci_dev *dev)
> >>>>  {
> >>>> -#if !defined(CONFIG_PCI)
> >>>> -	if (bus == 0 && PCI_SLOT(devfn) == 0)
> >>>> -		return PCIBIOS_DEVICE_NOT_FOUND;
> >>>> -#endif
> >>>> +	unsigned char c;
> >>>> +
> >>>> +	pci_read_config_byte(dev,0x83,&c);
> >>>> +	c |= 0x80;
> >>>> +	pci_write_config_byte(dev, 0x83, c);
> >>>> +
> >>>> +	pci_write_config_byte(dev, 0x09, 0x01);
> >>>> +	pci_write_config_byte(dev, 0x0a, 0x06);
> >>>> +
> >>>> +	pci_read_config_byte(dev,0x83,&c);
> >>>> +	c &= 0x7f;
> >>>> +	pci_write_config_byte(dev, 0x83, c);
> >>>>
> >>>> -	return PCIBIOS_SUCCESSFUL;
> >>>> +	pci_read_config_byte(dev,0x84,&c);
> >>>> +	c |= 0x01;
> >>>> +	pci_write_config_byte(dev, 0x84, c);
> >>>>  }
> >>>> +
> >>>> +static void __devinit quirk_uli5229(struct pci_dev *dev) {
> >>>> +	unsigned short temp;
> >>>> +	pci_write_config_word(dev, 0x04, 0x0405);
> >>>> +	pci_read_config_word(dev, 0x4a, &temp);
> >>>> +	temp |= 0x1000;
> >>>> +	pci_write_config_word(dev, 0x4a, temp); }
> >>>> +
> >>>> +static void __devinit early_uli5249(struct pci_dev *dev) {
> >>>> +	unsigned char temp;
> >>>> +	pci_write_config_word(dev, 0x04, 0x0007);
> >>>> +	pci_read_config_byte(dev, 0x7c, &temp);
> >>>> +	pci_write_config_byte(dev, 0x7c, 0x80);
> >>>> +	pci_write_config_byte(dev, 0x09, 0x01);
> >>>> +	pci_write_config_byte(dev, 0x7c, temp);
> >>>> +	dev->class |= 0x1;
> >>>> +}
> >>>> +
> >>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575,
> >> quirk_ali1575);
> >>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288,
> >> quirk_uli5288);
> >>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229,
> >> quirk_uli5229);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, 
> early_uli5249);
> >>>>  #endif /* CONFIG_PCI */
> >>>>
> >>>>
> >>>> diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
> >>>> b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
> >>>> index 944ec4b..9cca3d1 100644
> >>>> --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
> >>>> +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
> >>>> @@ -34,8 +34,8 @@ extern unsigned long 
> __secondary_hold_ac static 
> >>>> void __init  smp_86xx_release_core(int nr)  {
> >>>> -	void *mcm_vaddr;
> >>>> -	unsigned long vaddr, pcr;
> >>>> +	__be32 __iomem *mcm_vaddr;
> >>>> +	unsigned long pcr;
> >>>>
> >>>>  	if (nr < 0 || nr >= NR_CPUS)
> >>>>  		return;
> >>>> @@ -45,10 +45,9 @@ smp_86xx_release_core(int nr)
> >>>>  	 */
> >>>>  	mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
> >>>>  			    MPC86xx_MCM_SIZE);
> >>>> -	vaddr = (unsigned long)mcm_vaddr +  
> MCM_PORT_CONFIG_OFFSET;
> >>>> -	pcr = in_be32((volatile unsigned *)vaddr);
> >>>> +	pcr = in_be32(mcm_vaddr + 
> (MCM_PORT_CONFIG_OFFSET >> 2));
> >>>>  	pcr |= 1 << (nr + 24);
> >>>> -	out_be32((volatile unsigned *)vaddr, pcr);
> >>>> +	out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 
> 2), pcr);
> >>>>  }
> >>>>
> >>>>
> >>>> diff --git a/arch/powerpc/platforms/86xx/pci.c
> >>>> b/arch/powerpc/platforms/86xx/pci.c
> >>>> index 5180df7..0d8b340 100644
> >>>> --- a/arch/powerpc/platforms/86xx/pci.c
> >>>> +++ b/arch/powerpc/platforms/86xx/pci.c
> >>>> @@ -122,15 +122,12 @@ static void __init setup_pcie_atmu(struc 
> >>>> static void __init mpc86xx_setup_pcie(struct 
> pci_controller *hose,
> >>>> u32 pcie_offset, u32 pcie_size)  {
> >>>> -	volatile struct ccsr_pex *pcie;
> >>>>  	u16 cmd;
> >>>>  	unsigned int temps;
> >>>>
> >>>>  	DBG("PCIE host controller register offset 0x%08x, size
> >> 0x%08x.\n",
> >>>>  			pcie_offset, pcie_size);
> >>>>
> >>>> -	pcie = ioremap(pcie_offset, pcie_size);
> >>>> -
> >>>>  	early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
> >>>>  	cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
> >> PCI_COMMAND_MEMORY
> >>>>  	    | PCI_COMMAND_IO;
> >>>> @@ -144,6 +141,14 @@ mpc86xx_setup_pcie(struct pci_controller
> >>>>  	early_write_config_dword(hose, 0, 0, 
> PCI_PRIMARY_BUS, temps);  }
> >>>>
> >>>> +int mpc86xx_exclude_device(u_char bus, u_char devfn) {
> >>>> +	if (bus == 0 && PCI_SLOT(devfn) == 0)
> >>>> +		return PCIBIOS_DEVICE_NOT_FOUND;
> >>>> +
> >>>> +	return PCIBIOS_SUCCESSFUL;
> >>>> +}
> >>>> +
> >>>>  int __init add_bridge(struct device_node *dev)  {
> >>>>  	int len;
> >>>> @@ -198,128 +203,3 @@ int __init add_bridge(struct device_node
> >>>>
> >>>>  	return 0;
> >>>>  }
> >>>> -
> >>>> -static void __devinit quirk_ali1575(struct pci_dev *dev) -{
> >>>> -	unsigned short temp;
> >>>> -
> >>>> -	/*
> >>>> -	 * ALI1575 interrupts route table setup:
> >>>> -	 *
> >>>> -	 * IRQ pin   IRQ#
> >>>> -	 * PIRQA ---- 3
> >>>> -	 * PIRQB ---- 4
> >>>> -	 * PIRQC ---- 5
> >>>> -	 * PIRQD ---- 6
> >>>> -	 * PIRQE ---- 9
> >>>> -	 * PIRQF ---- 10
> >>>> -	 * PIRQG ---- 11
> >>>> -	 * PIRQH ---- 12
> >>>> -	 *
> >>>> -	 * interrupts for PCI slot0 -- PIRQA / PIRQB / 
> PIRQC / PIRQD
> >>>> -	 *                PCI slot1 -- PIRQB / PIRQC / 
> PIRQD / PIRQA
> >>>> -	 */
> >>>> -	pci_write_config_dword(dev, 0x48, 0xb9317542);
> >>>> -
> >>>> -	/* USB 1.1 OHCI controller 1, interrupt: PIRQE */
> >>>> -	pci_write_config_byte(dev, 0x86, 0x0c);
> >>>> -
> >>>> -	/* USB 1.1 OHCI controller 2, interrupt: PIRQF */
> >>>> -	pci_write_config_byte(dev, 0x87, 0x0d);
> >>>> -
> >>>> -	/* USB 1.1 OHCI controller 3, interrupt: PIRQH */
> >>>> -	pci_write_config_byte(dev, 0x88, 0x0f);
> >>>> -
> >>>> -	/* USB 2.0 controller, interrupt: PIRQ7 */
> >>>> -	pci_write_config_byte(dev, 0x74, 0x06);
> >>>> -
> >>>> -	/* Audio controller, interrupt: PIRQE */
> >>>> -	pci_write_config_byte(dev, 0x8a, 0x0c);
> >>>> -
> >>>> -	/* Modem controller, interrupt: PIRQF */
> >>>> -	pci_write_config_byte(dev, 0x8b, 0x0d);
> >>>> -
> >>>> -	/* HD audio controller, interrupt: PIRQG */
> >>>> -	pci_write_config_byte(dev, 0x8c, 0x0e);
> >>>> -
> >>>> -	/* Serial ATA interrupt: PIRQD */
> >>>> -	pci_write_config_byte(dev, 0x8d, 0x0b);
> >>>> -
> >>>> -	/* SMB interrupt: PIRQH */
> >>>> -	pci_write_config_byte(dev, 0x8e, 0x0f);
> >>>> -
> >>>> -	/* PMU ACPI SCI interrupt: PIRQH */
> >>>> -	pci_write_config_byte(dev, 0x8f, 0x0f);
> >>>> -
> >>>> -	/* Primary PATA IDE IRQ: 14
> >>>> -	 * Secondary PATA IDE IRQ: 15
> >>>> -	 */
> >>>> -	pci_write_config_byte(dev, 0x44, 0x3d);
> >>>> -	pci_write_config_byte(dev, 0x75, 0x0f);
> >>>> -
> >>>> -	/* Set IRQ14 and IRQ15 to legacy IRQs */
> >>>> -	pci_read_config_word(dev, 0x46, &temp);
> >>>> -	temp |= 0xc000;
> >>>> -	pci_write_config_word(dev, 0x46, temp);
> >>>> -
> >>>> -	/* Set i8259 interrupt trigger
> >>>> -	 * IRQ 3:  Level
> >>>> -	 * IRQ 4:  Level
> >>>> -	 * IRQ 5:  Level
> >>>> -	 * IRQ 6:  Level
> >>>> -	 * IRQ 7:  Level
> >>>> -	 * IRQ 9:  Level
> >>>> -	 * IRQ 10: Level
> >>>> -	 * IRQ 11: Level
> >>>> -	 * IRQ 12: Level
> >>>> -	 * IRQ 14: Edge
> >>>> -	 * IRQ 15: Edge
> >>>> -	 */
> >>>> -	outb(0xfa, 0x4d0);
> >>>> -	outb(0x1e, 0x4d1);
> >>>> -}
> >>>> -
> >>>> -static void __devinit quirk_uli5288(struct pci_dev *dev) -{
> >>>> -	unsigned char c;
> >>>> -
> >>>> -	pci_read_config_byte(dev,0x83,&c);
> >>>> -	c |= 0x80;
> >>>> -	pci_write_config_byte(dev, 0x83, c);
> >>>> -
> >>>> -	pci_write_config_byte(dev, 0x09, 0x01);
> >>>> -	pci_write_config_byte(dev, 0x0a, 0x06);
> >>>> -
> >>>> -	pci_read_config_byte(dev,0x83,&c);
> >>>> -	c &= 0x7f;
> >>>> -	pci_write_config_byte(dev, 0x83, c);
> >>>> -
> >>>> -	pci_read_config_byte(dev,0x84,&c);
> >>>> -	c |= 0x01;
> >>>> -	pci_write_config_byte(dev, 0x84, c);
> >>>> -}
> >>>> -
> >>>> -static void __devinit quirk_uli5229(struct pci_dev *dev) -{
> >>>> -	unsigned short temp;
> >>>> -	pci_write_config_word(dev, 0x04, 0x0405);
> >>>> -	pci_read_config_word(dev, 0x4a, &temp);
> >>>> -	temp |= 0x1000;
> >>>> -	pci_write_config_word(dev, 0x4a, temp);
> >>>> -}
> >>>> -
> >>>> -static void __devinit early_uli5249(struct pci_dev *dev) -{
> >>>> -	unsigned char temp;
> >>>> -	pci_write_config_word(dev, 0x04, 0x0007);
> >>>> -	pci_read_config_byte(dev, 0x7c, &temp);
> >>>> -	pci_write_config_byte(dev, 0x7c, 0x80);
> >>>> -	pci_write_config_byte(dev, 0x09, 0x01);
> >>>> -	pci_write_config_byte(dev, 0x7c, temp);
> >>>> -	dev->class |= 0x1;
> >>>> -}
> >>>> -
> >>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575,
> >> quirk_ali1575);
> >>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL,
> >>>> 0x5288, quirk_uli5288);
> >>>> -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229,
> >> quirk_uli5229);
> >>>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL,
> >>>> 0x5249, early_uli5249); diff --git
> >>>> a/include/asm-powerpc/mpc86xx.h
> >>>> b/include/asm-powerpc/mpc86xx.h index d0a6718..00d72a7 100644
> >>>> --- a/include/asm-powerpc/mpc86xx.h
> >>>> +++ b/include/asm-powerpc/mpc86xx.h
> >>>> @@ -20,10 +20,6 @@ #include <asm/mmu.h>
> >>>>
> >>>>  #ifdef CONFIG_PPC_86xx
> >>>>
> >>>> -#ifdef CONFIG_MPC8641_HPCN
> >>>> -#include <platforms/86xx/mpc8641_hpcn.h> -#endif
> >>>> -
> >>>>  #define _IO_BASE        isa_io_base
> >>>>  #define _ISA_MEM_BASE   isa_mem_base
> >>>>  #ifdef CONFIG_PCI
> >>>>
> >>>> _______________________________________________
> >>>> Linuxppc-dev mailing list
> >>>> [email protected]
> >>>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
> >>>>
> >>
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux