RE: [PATCH 5/7] CCISS: fix a few spelling errors

["Miller, Mike (OS Dev)" <Mike.Miller@hp.com>]

> -----Original Message-----
> From: Helgaas, Bjorn 
> Sent: Wednesday, June 14, 2006 6:12 PM
> To: Miller, Mike (OS Dev)
> Cc: ISS StorageDev; linux-kernel@vger.kernel.org; Andrew Morton
> Subject: [PATCH 5/7] CCISS: fix a few spelling errors
> 
> Fix a few spelling errors.
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

Acked-by: Mike Miller <mike.miller@hp.com>

> 
> Index: rc5-mm3/drivers/block/cciss.c
> ===================================================================
> --- rc5-mm3.orig/drivers/block/cciss.c	2006-06-14 
> 15:16:13.000000000 -0600
> +++ rc5-mm3/drivers/block/cciss.c	2006-06-14 
> 15:16:44.000000000 -0600
> @@ -129,7 +129,7 @@
>  	{ 0x3215103C, "Smart Array E200i", &SA5_access},  };
>  
> -/* How long to wait (in millesconds) for board to go into 
> simple mode */
> +/* How long to wait (in milliseconds) for board to go into 
> simple mode 
> +*/
>  #define MAX_CONFIG_WAIT 30000
>  #define MAX_IOCTL_CONFIG_WAIT 1000
>  
> @@ -1117,7 +1117,7 @@
>   *
>   * Right now I'm using the getgeometry() function to do 
> this, but this
>   * function should probably be finer grained and allow you 
> to revalidate one
> - * particualar logical volume (instead of all of them on a particular
> + * particular logical volume (instead of all of them on a particular
>   * controller).
>   */
>  static int revalidate_allvol(ctlr_info_t *host) @@ -1260,7 +1260,7 @@
>  		return;
>  
>  
> -	/* Get information about the disk and modify the driver 
> sturcture */
> +	/* Get information about the disk and modify the driver 
> structure */
>  	size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
>          if (size_buff == NULL)
>  		goto mem_msg;
> @@ -1335,7 +1335,7 @@
>  }
>  
>  /* This function will add and remove logical drives from the Logical
> - * drive array of the controller and maintain persistancy of ordering
> + * drive array of the controller and maintain persistency of ordering
>   * so that mount points are preserved until the next reboot. 
>  This allows
>   * for the removal of logical drives in the middle of the drive array
>   * without a re-ordering of those drives.
> @@ -1482,7 +1482,7 @@
>   * clear_all = This flag determines whether or not the disk 
> information
>   *             is going to be completely cleared out and the 
> highest_lun
>   *             reset.  Sometimes we want to clear out 
> information about
> - *             the disk in preperation for re-adding it.  In 
> this case
> + *             the disk in preparation for re-adding it.  In 
> this case
>   *             the highest_lun should be left unchanged and the LunID
>   *             should not be cleared.
>  */
> @@ -2597,7 +2597,7 @@
>  	return IRQ_HANDLED;
>  }
>  /*
> - *  We cannot read the structure directly, for portablity we 
> must use 
> + *  We cannot read the structure directly, for portability 
> we must use
>   *   the io functions.
>   *   This is for debug only. 
>   */
> @@ -2620,9 +2620,9 @@
>  				readl(&(tb->TransportActive)));
>  	printk("   Requested transport Method = 0x%x\n", 
>  			readl(&(tb->HostWrite.TransportRequest)));
> -	printk("   Coalese Interrupt Delay = 0x%x\n", 
> +	printk("   Coalesce Interrupt Delay = 0x%x\n", 
>  			readl(&(tb->HostWrite.CoalIntDelay)));
> -	printk("   Coalese Interrupt Count = 0x%x\n", 
> +	printk("   Coalesce Interrupt Count = 0x%x\n", 
>  			readl(&(tb->HostWrite.CoalIntCount)));
>  	printk("   Max outstanding commands = 0x%d\n", 
>  			readl(&(tb->CmdsOutMax)));
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/