Re: [PATCH] limit power budget on spitz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2006-06-08 at 10:34 +0200, Pavel Machek wrote:
> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
> index acde886..1d8b58c 100644
> --- a/drivers/usb/host/ohci-pxa27x.c
> +++ b/drivers/usb/host/ohci-pxa27x.c
> @@ -185,6 +185,13 @@ int usb_hcd_pxa27x_probe (const struct h
>  	/* Select Power Management Mode */
>  	pxa27x_ohci_select_pmm(inf->port_mode);
>  
> +	if (machine_is_spitz()) {
> +		/* Warning, not coming from any official docs. But
> +		 * spitz is unable to properly power wireless card
> +		 * claiming 500mA -- usb interface work but wireless
> +		 * does not. */
> +		hcd->power_budget = 250;
> +	}
>  	ohci_hcd_init(hcd_to_ohci(hcd));
>  
>  	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);

Should this value not be specified by the platform in the platform data
rather than a set of machine_is_xxx statements in the driver itself? I
already put most of the infrastructure for that into place.

I also strongly suspect the power supply on the device is limited to
150mA.

Richard

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux