Hello.
- Rework the driver setup code so that it prefixes the driver startup messages
with the real chip name.
- Print the measured f_CNT value and the DPLL setting for non-HPT3xx chips
as well.
- Claim the extra 240 bytes of I/O space for all chips, not only for those
having PCI device ID of 0x0004.
MBR, Sergei
Signed-off-by: Sergei Shtylyov <[email protected]>
Index: linus/drivers/ide/pci/hpt366.c
===================================================================
--- linus.orig/drivers/ide/pci/hpt366.c
+++ linus/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 0.43 May 17, 2006
+ * linux/drivers/ide/pci/hpt366.c Version 0.44 May 20, 2006
*
* Copyright (C) 1999-2003 Andre Hedrick <[email protected]>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -76,6 +76,8 @@
* and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
* - pass to init_chipset() handlers a copy of the IDE PCI device structure as
* they tamper with its fields
+ * - prefix the driver startup messages with the real chip name
+ * - claim the extra 240 bytes of I/O space for all chips
* - optimize the rate masking/filtering and the drive list lookup code
* <[email protected]>
*
@@ -990,8 +992,9 @@ static void __devinit hpt366_clocking(id
static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
{
- struct hpt_info *info = ide_get_hwifdata(hwif);
- struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = ide_get_hwifdata(hwif);
+ struct pci_dev *dev = hwif->pci_dev;
+ char *name = hwif->cds->name;
int adjust, i;
u16 freq = 0;
u32 pll, temp = 0;
@@ -1024,7 +1027,7 @@ static void __devinit hpt37x_clocking(id
*/
temp = inl(pci_resource_start(dev, 4) + 0x90);
if ((temp & 0xFFFFF000) != 0xABCDE000) {
- printk(KERN_WARNING "HPT37X: no clock data saved by BIOS\n");
+ printk(KERN_WARNING "%s: no clock data saved by BIOS\n", name);
/* Calculate the average value of f_CNT */
for (temp = i = 0; i < 128; i++) {
@@ -1051,10 +1054,7 @@ static void __devinit hpt37x_clocking(id
else
pll = F_LOW_PCI_66;
- printk(KERN_INFO "HPT3xxN detected, FREQ: %d, PLL: %d\n", freq, pll);
- }
- else
- {
+ } else {
if(freq < 0x9C)
pll = F_LOW_PCI_33;
else if(freq < 0xb0)
@@ -1063,18 +1063,21 @@ static void __devinit hpt37x_clocking(id
pll = F_LOW_PCI_50;
else
pll = F_LOW_PCI_66;
+ }
+ printk(KERN_INFO "%s: FREQ: %d, PLL: %d\n", name, freq, pll);
+ if (!(info->flags & IS_3xxN)) {
if (pll == F_LOW_PCI_33) {
info->speed = thirty_three_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n");
+ printk(KERN_DEBUG "%s: using 33MHz PCI clock\n", name);
} else if (pll == F_LOW_PCI_40) {
/* Unsupported */
} else if (pll == F_LOW_PCI_50) {
info->speed = fifty_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n");
+ printk(KERN_DEBUG "%s: using 50MHz PCI clock\n", name);
} else {
info->speed = sixty_six_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n");
+ printk(KERN_DEBUG "%s: using 66MHz PCI clock\n", name);
}
}
@@ -1123,7 +1126,7 @@ static void __devinit hpt37x_clocking(id
pci_write_config_byte(dev, 0x5b, 0x21);
info->speed = fifty_base_hpt37x;
- printk("HPT37X: using 50MHz internal PLL\n");
+ printk("%s: using 50MHz internal PLL\n", name);
goto init_hpt37X_done;
}
}
@@ -1136,8 +1139,8 @@ pll_recal:
init_hpt37X_done:
if (!info->speed)
- printk(KERN_ERR "HPT37x%s: unknown bus timing [%d %d].\n",
- (info->flags & IS_3xxN) ? "N" : "", pll, freq);
+ printk(KERN_ERR "%s: unknown bus timing [%d %d].\n",
+ name, pll, freq);
/*
* Reset the state engines.
* NOTE: avoid accidentally enabling the primary channel on HPT371N.
@@ -1330,7 +1333,8 @@ static void __devinit init_dma_hpt366(id
return;
if(info->speed == NULL) {
- printk(KERN_WARNING "hpt366: no known IDE timings, disabling DMA.\n");
+ printk(KERN_WARNING "%s: no known IDE timings, disabling DMA.\n",
+ hwif->cds->name);
return;
}
@@ -1365,7 +1369,7 @@ static void __devinit init_iops_hpt366(i
u8 mode, rid = 0;
if(info == NULL) {
- printk(KERN_WARNING "hpt366: out of memory.\n");
+ printk(KERN_WARNING "%s: out of memory.\n", hwif->cds->name);
return;
}
ide_set_hwifdata(hwif, info);
@@ -1430,14 +1434,19 @@ static int __devinit init_setup_hpt374(s
return ide_setup_pci_device(dev, d);
}
-static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d)
{
return ide_setup_pci_device(dev, d);
}
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
- u8 mcr1 = 0;
+ u8 rev = 0, mcr1 = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1)
+ d->name = "HPT371N";
/*
* HPT371 chips physically have only one channel, the secondary one,
@@ -1447,7 +1456,31 @@ static int __devinit init_setup_hpt371(s
*/
pci_read_config_byte(dev, 0x50, &mcr1);
if (mcr1 & 0x04)
- pci_write_config_byte(dev, 0x50, (mcr1 & ~0x04));
+ pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ u8 rev = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1)
+ d->name = "HPT372N";
+
+ return ide_setup_pci_device(dev, d);
+}
+
+static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ u8 rev = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1)
+ d->name = "HPT302N";
return ide_setup_pci_device(dev, d);
}
@@ -1456,30 +1489,22 @@ static int __devinit init_setup_hpt366(s
{
struct pci_dev *findev = NULL;
u8 rev = 0, pin1 = 0, pin2 = 0;
- char *chipset_names[] = {"HPT366", "HPT366", "HPT368",
- "HPT370", "HPT370A", "HPT372",
- "HPT372N" };
+ static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
+ "HPT370", "HPT370A", "HPT372",
+ "HPT372N" };
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if(dev->device == PCI_DEVICE_ID_TTI_HPT372N)
+ if (rev > 6)
rev = 6;
- if(rev <= 6)
- d->name = chipset_names[rev];
+ d->name = chipset_names[rev];
- switch(rev) {
- case 6:
- case 5:
- case 4:
- case 3:
- goto init_single;
- default:
- break;
- }
+ if (rev > 2)
+ goto init_single;
d->channels = 1;
@@ -1517,7 +1542,7 @@ static ide_pci_device_t hpt366_chipsets[
.extra = 240
},{ /* 1 */
.name = "HPT372A",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt372a,
.init_chipset = init_chipset_hpt366,
.init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
@@ -1525,9 +1550,10 @@ static ide_pci_device_t hpt366_chipsets[
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 2 */
.name = "HPT302",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt302,
.init_chipset = init_chipset_hpt366,
.init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
@@ -1535,6 +1561,7 @@ static ide_pci_device_t hpt366_chipsets[
.channels = 2,
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 3 */
.name = "HPT371",
.init_setup = init_setup_hpt371,
@@ -1546,6 +1573,7 @@ static ide_pci_device_t hpt366_chipsets[
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 4 */
.name = "HPT374",
.init_setup = init_setup_hpt374,
@@ -1556,9 +1584,10 @@ static ide_pci_device_t hpt366_chipsets[
.channels = 2, /* 4 */
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 5 */
.name = "HPT372N",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt372n,
.init_chipset = init_chipset_hpt366,
.init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
@@ -1566,6 +1595,7 @@ static ide_pci_device_t hpt366_chipsets[
.channels = 2, /* 4 */
.autodma = AUTODMA,
.bootable = OFF_BOARD,
+ .extra = 240
}
};
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
