On Tue, 16 May 2006, Dimitris Zilaskos wrote:
Hello ,
I have installed Slackware 10.2 on a fujitsu siemens e8110 laptop (Core Duo).
With 2.6.16.12 & 2.6.16.16 kernels, a few minutes after boot events/0 starts
eating 100% cpu (affecting performance and battery life).
Any ideas ?
events is used for a lot of things. Can you send lspci and dmesg
output? Can you try leaving the system totally idle (no network traffic, etc) for
a while and see if that delay before events begins looping is affected?
Do you have an earlier or later kernel release you can test/confirm as
affected or unaffected? It's not much fun, but if you can find a kernel
that properly works, it's always possible to do a bisect...
Best regards ,
--
============================================================================
Dimitris Zilaskos
Thanks,
Chase
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]