Extending the kernel parameters to a user determined size
on boot protocol >=2.02 for i386 and x86_64 architectures.
Signed-off-by: Alon Bar-Lev <[email protected]>
---
Hello,
Current implementation allows the kernel to receive up to
255 characters from the bootloader.
In current environment, the command-line is used in order to
specify many values, including suspend/resume, module
arguments, splash, initramfs and more.
255 characters are not enough anymore.
This is take 4 of this submission.
Take 4 (current), no reply of what is the problem in LILO.
Can someone please reply Peter questions? I understand that
people don't want the new kernel config option... But fixing
LILO should be more complex.
Take 3 - Back to menuconfig option, so it won't
break LILO (Although if it is broken because of this, it
should be fixed...).
Here are the comments from H. Peter Anvin:
> Does anyone know the actual details of the LILO breakage?
> If the problem is that LILO doesn't null-terminate the string when it's too long,
> then we can deal with this automatically, without introducing compile-time options
> (which were already once rejected.)
>
> If the problem is with LILO booting *old* kernels, then that's going to have to require
> some LILO changes, and probably a boot revision bump.
Take 2 - Removed the menuconfig into a fixed 2048 size. This
patch was rejected. This is what the 2.6.11-rc2 changelog
has to say about the matter:
> Revert "x86_64/i386: increase command line size" patch
> It's a bootup dependancy, you can't just increase it
> randomly, and it breaks booting with LILO.
> Pointed out by Janos Farkas and Adrian Bunk.
Take 1 - Patch that allows command-line size to be
determined in menuconfig. People did not want to see a new
config option.
---
If any of you think that this should be applied for other
architectures, please reply.
Current architectures that have 256 limit are:
alpha, cris, i386, m64k, mips, sh, sh64, sparc, sparc64,
x86_64, xtensa
Current architectures that have 512 values are:
frv(512), h8300(512), ia64(512), m32r(512), m68knommu(512),
mips(512), powerpc(512), v850(512)
Current architectures that are OK:
arm(1024), arm26(1024), parisc(1024)
Current strange ones:
s390(896) - I guess IBM has a good reason for this constant...
Best Regards,
Alon Bar-Lev
diff -urNp linux-2.6.16/arch/i386/Kconfig linux-2.6.16.new/arch/i386/Kconfig
--- linux-2.6.16/arch/i386/Kconfig 2006-03-20 07:53:29.000000000 +0200
+++ linux-2.6.16.new/arch/i386/Kconfig 2006-04-14 01:35:06.000000000 +0300
@@ -644,6 +644,14 @@ config EFI
anything about EFI). However, even with this option, the resultant
kernel should continue to boot on existing non-EFI platforms.
+config COMMAND_LINE_SIZE
+ int "Maximum kernel command-line size"
+ range 256 4096
+ default 256
+ ---help---
+ This enables adjusting maximum command-line size. If you are unsure
+ specify 256.
+
config IRQBALANCE
bool "Enable kernel irq balancing"
depends on SMP && X86_IO_APIC
diff -urNp linux-2.6.16/arch/x86_64/Kconfig linux-2.6.16.new/arch/x86_64/Kconfig
--- linux-2.6.16/arch/x86_64/Kconfig 2006-03-20 07:53:29.000000000 +0200
+++ linux-2.6.16.new/arch/x86_64/Kconfig 2006-04-14 01:35:30.000000000 +0300
@@ -445,6 +445,14 @@ config PHYSICAL_START
Don't change this unless you know what you are doing.
+config COMMAND_LINE_SIZE
+ int "Maximum kernel command-line size"
+ range 256 4096
+ default 256
+ ---help---
+ This enables adjusting maximum command-line size. If you are unsure
+ specify 256.
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff -urNp linux-2.6.16/include/asm-i386/param.h linux-2.6.16.new/include/asm-i386/param.h
--- linux-2.6.16/include/asm-i386/param.h 2006-03-20 07:53:29.000000000 +0200
+++ linux-2.6.16.new/include/asm-i386/param.h 2006-04-14 02:00:45.000000000 +0300
@@ -19,6 +19,15 @@
#endif
#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+/*
+ * This COMMAND_LINE_SIZE definition was left here
+ * for compatability, its correct location is in setup.h.
+ * Boot loaders that use this parameters will continue
+ * to use 256 maximum command-line size.
+ */
+#ifndef CONFIG_COMMAND_LINE_SIZE
#define COMMAND_LINE_SIZE 256
+#endif
#endif
diff -urNp linux-2.6.16/include/asm-i386/setup.h linux-2.6.16.new/include/asm-i386/setup.h
--- linux-2.6.16/include/asm-i386/setup.h 2006-03-20 07:53:29.000000000 +0200
+++ linux-2.6.16.new/include/asm-i386/setup.h 2006-04-14 01:32:16.000000000 +0300
@@ -17,7 +17,7 @@
#define MAX_NONPAE_PFN (1 << 20)
#define PARAM_SIZE 4096
-#define COMMAND_LINE_SIZE 256
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#define OLD_CL_MAGIC_ADDR 0x90020
#define OLD_CL_MAGIC 0xA33F
diff -urNp linux-2.6.16/include/asm-x86_64/setup.h linux-2.6.16.new/include/asm-x86_64/setup.h
--- linux-2.6.16/include/asm-x86_64/setup.h 2006-03-20 07:53:29.000000000 +0200
+++ linux-2.6.16.new/include/asm-x86_64/setup.h 2006-04-14 01:33:27.000000000 +0300
@@ -1,6 +1,6 @@
#ifndef _x8664_SETUP_H
#define _x8664_SETUP_H
-#define COMMAND_LINE_SIZE 256
+#define COMMAND_LINE_SIZE CONFIG_COMMAND_LINE_SIZE
#endif
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
