Problems (lockup/hang) with PCI-X slot on X5DPL motherboard

[Orion Poplawski <orion@cora.nwra.com>]

I'm getting to my wits end, so any help would be greatly appreciated.

I've got two disk servers, on with SuperMicro X5DPL-iGM motherboard, the 
other with a X5DPL-TGM board.  These system use the E7501 chipset, and 
provide to PCI-X buses.  One for slots 4 and 5, the other for slot 6 and 
the embedded Intel 82545EM GigE NIC.

I have had nothing but trouble trying to use slot 6 on these machines. 
Recently I've been trying with a MV88SX6081 133MHz PCI-X card.  In both 
machines I get lockups when trying to use the controller.  I also see 
corruption on the on-board NIC on the TGM (though not on the iGM) with 
the card in slot 6.

I'm running Fedora Core 4 with kernel 2.6.12-1.1456_FC4smp and mv_sata 
driver 3.6.1.  I'm stuck on the older kernel because of the mv_sata driver.

Now, maybe this is all the fault of the mv_sata driver, but I believe I 
had problems on the iGM machine with a Intel 82545GM PCI-X nic in slot 6 
as well which does not use the mv_sata driver at all normally.

Thoughts?

- Orion

--
Orion Poplawski
System Administrator                   303-415-9701 x222
Colorado Research Associates/NWRA      FAX: 303-415-9702
3380 Mitchell Lane, Boulder CO 80301   http://www.co-ra.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/