RE: x86_86 SMP megaraid_mbox hangups and panics.

["Ju, Seokmann" <Seokmann.Ju@lsil.com>]

Wednesday, April 12, 2006 1:53 PM, Dormando  wrote:
> Can you confirm that you read my whole message? I might be a complete 
> idiot, but let me reiterate some highlights and add a few 
> more details 
> from my last mail:
> 
> If I build a 32-bit SMP OR 64-bit UP kernel, the cards will boot and 
> work *every time*.
Sorry, I've gone through but, ...

So far, the driver has been working on various x86_64 platforms (both AMD64 and EM64T with more than 4 GB mem.). Is this first time x86_64 kernel on those platforms or, the systems have been running on previous x86_64 kernels?
If you send me console log file, I'll look into it. But, still the issue need to be handled by SE team for further investigation.

I've submitted a patch that addresses one problem in 'megaraid_reset_handler()', but I don't think the fix connected to your issue directly.

Thank you,

Seokmann



> -----Original Message-----
> From: dormando [mailto:dormando@rydia.net] 
> Sent: Wednesday, April 12, 2006 1:53 PM
> To: Ju, Seokmann
> Cc: linux-kernel@vger.kernel.org
> Subject: Re: x86_86 SMP megaraid_mbox hangups and panics.
> 
> Ju, Seokmann wrote:
> > Hi,
> >> Most of the time the server hits: "megaraid: probe new 
> device" - with 
> >> the device information, then hangs and starts the 180 second 
> >> countdown: 
> >> "megaraid: wait for FW to boot [blah]"
> >> After which I get a VFS panic for not having a root disk.
> > This means the controller is NOT taking any commands from 
> the driver at that time.
> > In other words, the F/W is NOT ready to take any command, yet.
> > It sounds like that the controller is NOT in good condition 
> for some reason and needs to check sanity of it.
> > You may want to check with LSI logic SE team.
> > 
> > Thank you,
> 
> Can you confirm that you read my whole message? I might be a complete 
> idiot, but let me reiterate some highlights and add a few 
> more details 
> from my last mail:
> 
> If I build a 32-bit SMP OR 64-bit UP kernel, the cards will boot and 
> work *every time*.
> 
> Most of the time this is a *kernel panic* in megaraid_ack_sequence, 
> somewhere through megaraid_isr in megaraid_mbox.c
> *Sometimes* it results in the firmware hanging like you 
> mentioned above.
> If I compile the drivers as modules instead of statically, this 
> *sometimes* results in the machine booting all the way. Once 
> the machine 
> boots up, I can give it a good 'ole I/O beatdown and it does 
> not flinch.
> 
> As in: I boot it once, it hangs. I reboot, it panics. I reboot, it 
> panics. I reboot, it works. I have 16 cards in 16 systems that all 
> exhibit the same behavior. Looks like an x86_64 SMP timing 
> issue of some 
> kind to me, and less of a card issue. Please correct me if I am wrong!
> 
> -Dormando
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/