On Tuesday 11 April 2006 10:04, Denis Vlasenko wrote:
> * moved inlines into aic79xx_core.c and aic7xxx_core.c
> * fixed bug in ahd_delay (made it a trivial wrapper around udelay)
> * fixed bug in aic7xxx_pci.c (wrong order of parameters
> in ahc_pci_write_config calls)
> * marked a few functions static
> * spelling fix in error message
Won't apply t your tree because I failed to notice that you
already included those two small fixes.
Rediffed patch (which hopefully will apply) is attached. Sorry.
> Patch which does s/__inline/inline/g will follow in a few minutes.
This one (which I already sent) should apply.
Signed-off-by: Denis Vlasenko <[email protected]>
--
vda
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx.h Mon Mar 20 07:53:29 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx.h Tue Apr 11 09:46:49 2006
@@ -1400,7 +1400,6 @@ int ahd_read_flexport(struct ahd_soft
int ahd_wait_flexport(struct ahd_softc *ahd);
/*************************** Interrupt Services *******************************/
-void ahd_pci_intr(struct ahd_softc *ahd);
void ahd_clear_intstat(struct ahd_softc *ahd);
void ahd_flush_qoutfifo(struct ahd_softc *ahd);
void ahd_run_qoutfifo(struct ahd_softc *ahd);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_core.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_core.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_core.c Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_core.c Tue Apr 11 09:46:49 2006
@@ -50,9 +50,601 @@
#include <dev/aic7xxx/aicasm/aicasm_insformat.h>
#endif
-/* Were inlined, but moved out-of-line because they are HUGE: */
-#include "aic79xx_osm_o.c"
-#include "aic79xx_inline.c"
+/***************************** Timer Facilities *******************************/
+#define ahd_timer_init init_timer
+#define ahd_timer_stop del_timer_sync
+typedef void ahd_linux_callback_t (u_long);
+static void
+ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
+{
+ struct ahd_softc *ahd;
+
+ ahd = (struct ahd_softc *)arg;
+ del_timer(timer);
+ timer->data = (u_long)arg;
+ timer->expires = jiffies + (usec * HZ)/1000000;
+ timer->function = (ahd_linux_callback_t*)func;
+ add_timer(timer);
+}
+
+/***************************** Low Level I/O **********************************/
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readb(ahd->bshs[0].maddr + port);
+ } else {
+ x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readw(ahd->bshs[0].maddr + port);
+ } else {
+ x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writeb(val, ahd->bshs[0].maddr + port);
+ } else {
+ outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writew(val, ahd->bshs[0].maddr + port);
+ } else {
+ outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahd_inb(ahd, port);
+}
+
+/************************ Sequencer Execution Control *************************/
+void
+ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
+{
+ if (ahd->src_mode == src && ahd->dst_mode == dst)
+ return;
+#ifdef AHD_DEBUG
+ if (ahd->src_mode == AHD_MODE_UNKNOWN
+ || ahd->dst_mode == AHD_MODE_UNKNOWN)
+ panic("Setting mode prior to saving it.\n");
+ if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+ printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
+ ahd_build_mode_state(ahd, src, dst));
+#endif
+ ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
+ ahd->src_mode = src;
+ ahd->dst_mode = dst;
+}
+
+void
+ahd_update_modes(struct ahd_softc *ahd)
+{
+ ahd_mode_state mode_ptr;
+ ahd_mode src;
+ ahd_mode dst;
+
+ mode_ptr = ahd_inb(ahd, MODE_PTR);
+#ifdef AHD_DEBUG
+ if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+ printf("Reading mode 0x%x\n", mode_ptr);
+#endif
+ ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
+ ahd_known_modes(ahd, src, dst);
+}
+
+ahd_mode_state
+ahd_save_modes(struct ahd_softc *ahd)
+{
+ if (ahd->src_mode == AHD_MODE_UNKNOWN
+ || ahd->dst_mode == AHD_MODE_UNKNOWN)
+ ahd_update_modes(ahd);
+
+ return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
+}
+
+void
+ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
+{
+ ahd_mode src;
+ ahd_mode dst;
+
+ ahd_extract_mode_state(ahd, state, &src, &dst);
+ ahd_set_modes(ahd, src, dst);
+}
+
+/*
+ * Allow the sequencer to continue program execution.
+ * We check here to ensure that no additional interrupt
+ * sources that would cause the sequencer to halt have been
+ * asserted. If, for example, a SCSI bus reset is detected
+ * while we are fielding a different, pausing, interrupt type,
+ * we don't want to release the sequencer before going back
+ * into our interrupt handler and dealing with this new
+ * condition.
+ */
+void
+ahd_unpause(struct ahd_softc *ahd)
+{
+ /*
+ * Automatically restore our modes to those saved
+ * prior to the first change of the mode.
+ */
+ if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
+ && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
+ if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
+ ahd_reset_cmds_pending(ahd);
+ ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
+ }
+
+ if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
+ ahd_outb(ahd, HCNTRL, ahd->unpause);
+
+ ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
+}
+
+/*********************** Scatter Gather List Handling *************************/
+void *
+ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
+ void *sgptr, dma_addr_t addr, bus_size_t len, int last)
+{
+ scb->sg_count++;
+ if (sizeof(dma_addr_t) > 4
+ && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+ struct ahd_dma64_seg *sg;
+
+ sg = (struct ahd_dma64_seg *)sgptr;
+ sg->addr = ahd_htole64(addr);
+ sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
+ return (sg + 1);
+ } else {
+ struct ahd_dma_seg *sg;
+
+ sg = (struct ahd_dma_seg *)sgptr;
+ sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
+ sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
+ | (last ? AHD_DMA_LAST_SEG : 0));
+ return (sg + 1);
+ }
+}
+
+static void
+ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
+{
+ /* XXX Handle target mode SCBs. */
+ scb->crc_retry_count = 0;
+ if ((scb->flags & SCB_PACKETIZED) != 0) {
+ /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */
+ scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
+ } else {
+ if (ahd_get_transfer_length(scb) & 0x01)
+ scb->hscb->task_attribute = SCB_XFERLEN_ODD;
+ else
+ scb->hscb->task_attribute = 0;
+ }
+
+ if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
+ || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
+ scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
+ ahd_htole32(scb->sense_busaddr);
+}
+
+static void
+ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+ /*
+ * Copy the first SG into the "current" data ponter area.
+ */
+ if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+ struct ahd_dma64_seg *sg;
+
+ sg = (struct ahd_dma64_seg *)scb->sg_list;
+ scb->hscb->dataptr = sg->addr;
+ scb->hscb->datacnt = sg->len;
+ } else {
+ struct ahd_dma_seg *sg;
+ uint32_t *dataptr_words;
+
+ sg = (struct ahd_dma_seg *)scb->sg_list;
+ dataptr_words = (uint32_t*)&scb->hscb->dataptr;
+ dataptr_words[0] = sg->addr;
+ dataptr_words[1] = 0;
+ if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
+ uint64_t high_addr;
+
+ high_addr = ahd_le32toh(sg->len) & 0x7F000000;
+ scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
+ }
+ scb->hscb->datacnt = sg->len;
+ }
+ /*
+ * Note where to find the SG entries in bus space.
+ * We also set the full residual flag which the
+ * sequencer will clear as soon as a data transfer
+ * occurs.
+ */
+ scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+uint16_t
+ahd_inw(struct ahd_softc *ahd, u_int port)
+{
+ /*
+ * Read high byte first as some registers increment
+ * or have other side effects when the low byte is
+ * read.
+ */
+ return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
+}
+
+void
+ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
+{
+ /*
+ * Write low byte first to accomodate registers
+ * such as PRGMCNT where the order maters.
+ */
+ ahd_outb(ahd, port, value & 0xFF);
+ ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahd_inl(struct ahd_softc *ahd, u_int port)
+{
+ return ((ahd_inb(ahd, port))
+ | (ahd_inb(ahd, port+1) << 8)
+ | (ahd_inb(ahd, port+2) << 16)
+ | (ahd_inb(ahd, port+3) << 24));
+}
+
+void
+ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
+{
+ ahd_outb(ahd, port, (value) & 0xFF);
+ ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
+ ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
+ ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahd_inq(struct ahd_softc *ahd, u_int port)
+{
+ return ((ahd_inb(ahd, port))
+ | (ahd_inb(ahd, port+1) << 8)
+ | (ahd_inb(ahd, port+2) << 16)
+ | (ahd_inb(ahd, port+3) << 24)
+ | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
+ | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
+ | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
+ | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
+}
+
+void
+ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
+{
+ ahd_outb(ahd, port, value & 0xFF);
+ ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+ ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
+ ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
+ ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
+ ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
+ ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
+ ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
+}
+
+u_int
+ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ u_int value;
+
+ /*
+ * Workaround PCI-X Rev A. hardware bug.
+ * After a host read of SCB memory, the chip
+ * may become confused into thinking prefetch
+ * was required. This starts the discard timer
+ * running and can cause an unexpected discard
+ * timer interrupt. The work around is to read
+ * a normal register prior to the exhaustion of
+ * the discard timer. The mode pointer register
+ * has no side effects and so serves well for
+ * this purpose.
+ *
+ * Razor #528
+ */
+ value = ahd_inb(ahd, offset);
+ if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
+ ahd_inb(ahd, MODE_PTR);
+ return (value);
+}
+
+u_int
+ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inb_scbram(ahd, offset)
+ | (ahd_inb_scbram(ahd, offset+1) << 8));
+}
+
+uint32_t
+ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inw_scbram(ahd, offset)
+ | (ahd_inw_scbram(ahd, offset+2) << 16));
+}
+
+uint64_t
+ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inl_scbram(ahd, offset)
+ | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
+}
+
+struct scb *
+ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
+{
+ struct scb* scb;
+
+ if (tag >= AHD_SCB_MAX)
+ return (NULL);
+ scb = ahd->scb_data.scbindex[tag];
+ if (scb != NULL)
+ ahd_sync_scb(ahd, scb,
+ BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+ return (scb);
+}
+
+static void
+ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
+{
+ struct hardware_scb *q_hscb;
+ struct map_node *q_hscb_map;
+ uint32_t saved_hscb_busaddr;
+
+ /*
+ * Our queuing method is a bit tricky. The card
+ * knows in advance which HSCB (by address) to download,
+ * and we can't disappoint it. To achieve this, the next
+ * HSCB to download is saved off in ahd->next_queued_hscb.
+ * When we are called to queue "an arbitrary scb",
+ * we copy the contents of the incoming HSCB to the one
+ * the sequencer knows about, swap HSCB pointers and
+ * finally assign the SCB to the tag indexed location
+ * in the scb_array. This makes sure that we can still
+ * locate the correct SCB by SCB_TAG.
+ */
+ q_hscb = ahd->next_queued_hscb;
+ q_hscb_map = ahd->next_queued_hscb_map;
+ saved_hscb_busaddr = q_hscb->hscb_busaddr;
+ memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+ q_hscb->hscb_busaddr = saved_hscb_busaddr;
+ q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
+
+ /* Now swap HSCB pointers. */
+ ahd->next_queued_hscb = scb->hscb;
+ ahd->next_queued_hscb_map = scb->hscb_map;
+ scb->hscb = q_hscb;
+ scb->hscb_map = q_hscb_map;
+
+ /* Now define the mapping from tag to SCB in the scbindex */
+ ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+ ahd_swap_with_next_hscb(ahd, scb);
+
+ if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
+ panic("Attempt to queue invalid SCB tag %x\n",
+ SCB_GET_TAG(scb));
+
+ /*
+ * Keep a history of SCBs we've downloaded in the qinfifo.
+ */
+ ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
+ ahd->qinfifonext++;
+
+ if (scb->sg_count != 0)
+ ahd_setup_data_scb(ahd, scb);
+ else
+ ahd_setup_noxfer_scb(ahd, scb);
+ ahd_setup_scb_common(ahd, scb);
+
+ /*
+ * Make sure our data is consistent from the
+ * perspective of the adapter.
+ */
+ ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+#ifdef AHD_DEBUG
+ if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
+ uint64_t host_dataptr;
+
+ host_dataptr = ahd_le64toh(scb->hscb->dataptr);
+ printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
+ ahd_name(ahd),
+ SCB_GET_TAG(scb), scb->hscb->scsiid,
+ ahd_le32toh(scb->hscb->hscb_busaddr),
+ (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
+ (u_int)(host_dataptr & 0xFFFFFFFF),
+ ahd_le32toh(scb->hscb->datacnt));
+ }
+#endif
+ /* Tell the adapter about the newly queued SCB */
+ ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
+}
+
+/************************** Interrupt Processing ******************************/
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHD_RUN_QOUTFIFO 0x1
+#define AHD_RUN_TQINFIFO 0x2
+static u_int
+ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
+{
+ u_int retval;
+
+ retval = 0;
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
+ /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
+ /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
+ if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
+ == ahd->qoutfifonext_valid_tag)
+ retval |= AHD_RUN_QOUTFIFO;
+#ifdef AHD_TARGET_MODE
+ if ((ahd->flags & AHD_TARGETROLE) != 0
+ && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
+ ahd->shared_data_map.dmamap,
+ ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
+ /*len*/sizeof(struct target_cmd),
+ BUS_DMASYNC_POSTREAD);
+ if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
+ retval |= AHD_RUN_TQINFIFO;
+ }
+#endif
+ return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahd_intr(struct ahd_softc *ahd)
+{
+ u_int intstat;
+
+ if ((ahd->pause & INTEN) == 0) {
+ /*
+ * Our interrupt is not enabled on the chip
+ * and may be disabled for re-entrancy reasons,
+ * so just return. This is likely just a shared
+ * interrupt.
+ */
+ return (0);
+ }
+
+ /*
+ * Instead of directly reading the interrupt status register,
+ * infer the cause of the interrupt by checking our in-core
+ * completion queues. This avoids a costly PCI bus read in
+ * most cases.
+ */
+ if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
+ && (ahd_check_cmdcmpltqueues(ahd) != 0))
+ intstat = CMDCMPLT;
+ else
+ intstat = ahd_inb(ahd, INTSTAT);
+
+ if ((intstat & INT_PEND) == 0)
+ return (0);
+
+ if (intstat & CMDCMPLT) {
+ ahd_outb(ahd, CLRINT, CLRCMDINT);
+
+ /*
+ * Ensure that the chip sees that we've cleared
+ * this interrupt before we walk the output fifo.
+ * Otherwise, we may, due to posted bus writes,
+ * clear the interrupt after we finish the scan,
+ * and after the sequencer has added new entries
+ * and asserted the interrupt again.
+ */
+ if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
+ if (ahd_is_paused(ahd)) {
+ /*
+ * Potentially lost SEQINT.
+ * If SEQINTCODE is non-zero,
+ * simulate the SEQINT.
+ */
+ if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
+ intstat |= SEQINT;
+ }
+ } else {
+ ahd_flush_device_writes(ahd);
+ }
+ ahd_run_qoutfifo(ahd);
+ ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
+ ahd->cmdcmplt_total++;
+#ifdef AHD_TARGET_MODE
+ if ((ahd->flags & AHD_TARGETROLE) != 0)
+ ahd_run_tqinfifo(ahd, /*paused*/FALSE);
+#endif
+ }
+
+ /*
+ * Handle statuses that may invalidate our cached
+ * copy of INTSTAT separately.
+ */
+ if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
+ /* Hot eject. Do nothing */
+ } else if (intstat & HWERRINT) {
+ ahd_handle_hwerrint(ahd);
+ } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
+ ahd->bus_intr(ahd);
+ } else {
+
+ if ((intstat & SEQINT) != 0)
+ ahd_handle_seqint(ahd, intstat);
+
+ if ((intstat & SCSIINT) != 0)
+ ahd_handle_scsiint(ahd, intstat);
+ }
+ return (1);
+}
/***************************** Lookup Tables **********************************/
char *ahd_chip_names[] =
@@ -244,7 +836,7 @@ static int ahd_handle_target_cmd(struct
/******************************** Private Inlines *****************************/
static __inline void ahd_assert_atn(struct ahd_softc *ahd);
static __inline int ahd_currently_packetized(struct ahd_softc *ahd);
-static __inline int ahd_set_active_fifo(struct ahd_softc *ahd);
+static int ahd_set_active_fifo(struct ahd_softc *ahd);
static __inline void
ahd_assert_atn(struct ahd_softc *ahd)
@@ -8279,7 +8871,7 @@ ahd_handle_scsi_status(struct ahd_softc
break;
}
case SCSI_STATUS_OK:
- printf("%s: Interrupted for staus of 0???\n",
+ printf("%s: Interrupted for status of 0???\n",
ahd_name(ahd));
/* FALLTHROUGH */
default:
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.c Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.c Thu Jan 1 03:00:00 1970
@@ -1,460 +0,0 @@
-/*
- * Routines shareable across OS platforms.
- *
- * Formerly inlined routines from aic79xx_inline.h are moved here.
- * This file is #included into aic79xx_core.c
- */
-
-/************************ Sequencer Execution Control *************************/
-void
-ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
-{
- if (ahd->src_mode == src && ahd->dst_mode == dst)
- return;
-#ifdef AHD_DEBUG
- if (ahd->src_mode == AHD_MODE_UNKNOWN
- || ahd->dst_mode == AHD_MODE_UNKNOWN)
- panic("Setting mode prior to saving it.\n");
- if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
- printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
- ahd_build_mode_state(ahd, src, dst));
-#endif
- ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
- ahd->src_mode = src;
- ahd->dst_mode = dst;
-}
-
-void
-ahd_update_modes(struct ahd_softc *ahd)
-{
- ahd_mode_state mode_ptr;
- ahd_mode src;
- ahd_mode dst;
-
- mode_ptr = ahd_inb(ahd, MODE_PTR);
-#ifdef AHD_DEBUG
- if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
- printf("Reading mode 0x%x\n", mode_ptr);
-#endif
- ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
- ahd_known_modes(ahd, src, dst);
-}
-
-ahd_mode_state
-ahd_save_modes(struct ahd_softc *ahd)
-{
- if (ahd->src_mode == AHD_MODE_UNKNOWN
- || ahd->dst_mode == AHD_MODE_UNKNOWN)
- ahd_update_modes(ahd);
-
- return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
-}
-
-void
-ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
-{
- ahd_mode src;
- ahd_mode dst;
-
- ahd_extract_mode_state(ahd, state, &src, &dst);
- ahd_set_modes(ahd, src, dst);
-}
-
-/*
- * Allow the sequencer to continue program execution.
- * We check here to ensure that no additional interrupt
- * sources that would cause the sequencer to halt have been
- * asserted. If, for example, a SCSI bus reset is detected
- * while we are fielding a different, pausing, interrupt type,
- * we don't want to release the sequencer before going back
- * into our interrupt handler and dealing with this new
- * condition.
- */
-void
-ahd_unpause(struct ahd_softc *ahd)
-{
- /*
- * Automatically restore our modes to those saved
- * prior to the first change of the mode.
- */
- if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
- && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
- if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
- ahd_reset_cmds_pending(ahd);
- ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
- }
-
- if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
- ahd_outb(ahd, HCNTRL, ahd->unpause);
-
- ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
-}
-
-/*********************** Scatter Gather List Handling *************************/
-void *
-ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
- void *sgptr, dma_addr_t addr, bus_size_t len, int last)
-{
- scb->sg_count++;
- if (sizeof(dma_addr_t) > 4
- && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
- struct ahd_dma64_seg *sg;
-
- sg = (struct ahd_dma64_seg *)sgptr;
- sg->addr = ahd_htole64(addr);
- sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
- return (sg + 1);
- } else {
- struct ahd_dma_seg *sg;
-
- sg = (struct ahd_dma_seg *)sgptr;
- sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
- sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
- | (last ? AHD_DMA_LAST_SEG : 0));
- return (sg + 1);
- }
-}
-
-void
-ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
-{
- /* XXX Handle target mode SCBs. */
- scb->crc_retry_count = 0;
- if ((scb->flags & SCB_PACKETIZED) != 0) {
- /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */
- scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
- } else {
- if (ahd_get_transfer_length(scb) & 0x01)
- scb->hscb->task_attribute = SCB_XFERLEN_ODD;
- else
- scb->hscb->task_attribute = 0;
- }
-
- if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
- || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
- scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
- ahd_htole32(scb->sense_busaddr);
-}
-
-void
-ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
-{
- /*
- * Copy the first SG into the "current" data ponter area.
- */
- if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
- struct ahd_dma64_seg *sg;
-
- sg = (struct ahd_dma64_seg *)scb->sg_list;
- scb->hscb->dataptr = sg->addr;
- scb->hscb->datacnt = sg->len;
- } else {
- struct ahd_dma_seg *sg;
- uint32_t *dataptr_words;
-
- sg = (struct ahd_dma_seg *)scb->sg_list;
- dataptr_words = (uint32_t*)&scb->hscb->dataptr;
- dataptr_words[0] = sg->addr;
- dataptr_words[1] = 0;
- if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
- uint64_t high_addr;
-
- high_addr = ahd_le32toh(sg->len) & 0x7F000000;
- scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
- }
- scb->hscb->datacnt = sg->len;
- }
- /*
- * Note where to find the SG entries in bus space.
- * We also set the full residual flag which the
- * sequencer will clear as soon as a data transfer
- * occurs.
- */
- scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
-}
-
-/*********************** Miscelaneous Support Functions ***********************/
-uint16_t
-ahd_inw(struct ahd_softc *ahd, u_int port)
-{
- /*
- * Read high byte first as some registers increment
- * or have other side effects when the low byte is
- * read.
- */
- return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
-}
-
-void
-ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
-{
- /*
- * Write low byte first to accomodate registers
- * such as PRGMCNT where the order maters.
- */
- ahd_outb(ahd, port, value & 0xFF);
- ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
-}
-
-uint32_t
-ahd_inl(struct ahd_softc *ahd, u_int port)
-{
- return ((ahd_inb(ahd, port))
- | (ahd_inb(ahd, port+1) << 8)
- | (ahd_inb(ahd, port+2) << 16)
- | (ahd_inb(ahd, port+3) << 24));
-}
-
-void
-ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
-{
- ahd_outb(ahd, port, (value) & 0xFF);
- ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
- ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
- ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
-}
-
-uint64_t
-ahd_inq(struct ahd_softc *ahd, u_int port)
-{
- return ((ahd_inb(ahd, port))
- | (ahd_inb(ahd, port+1) << 8)
- | (ahd_inb(ahd, port+2) << 16)
- | (ahd_inb(ahd, port+3) << 24)
- | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
- | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
- | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
- | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
-}
-
-void
-ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
-{
- ahd_outb(ahd, port, value & 0xFF);
- ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
- ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
- ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
- ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
- ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
- ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
- ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
-}
-
-struct scb *
-ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
-{
- struct scb* scb;
-
- if (tag >= AHD_SCB_MAX)
- return (NULL);
- scb = ahd->scb_data.scbindex[tag];
- if (scb != NULL)
- ahd_sync_scb(ahd, scb,
- BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
- return (scb);
-}
-
-void
-ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
-{
- struct hardware_scb *q_hscb;
- struct map_node *q_hscb_map;
- uint32_t saved_hscb_busaddr;
-
- /*
- * Our queuing method is a bit tricky. The card
- * knows in advance which HSCB (by address) to download,
- * and we can't disappoint it. To achieve this, the next
- * HSCB to download is saved off in ahd->next_queued_hscb.
- * When we are called to queue "an arbitrary scb",
- * we copy the contents of the incoming HSCB to the one
- * the sequencer knows about, swap HSCB pointers and
- * finally assign the SCB to the tag indexed location
- * in the scb_array. This makes sure that we can still
- * locate the correct SCB by SCB_TAG.
- */
- q_hscb = ahd->next_queued_hscb;
- q_hscb_map = ahd->next_queued_hscb_map;
- saved_hscb_busaddr = q_hscb->hscb_busaddr;
- memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
- q_hscb->hscb_busaddr = saved_hscb_busaddr;
- q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
-
- /* Now swap HSCB pointers. */
- ahd->next_queued_hscb = scb->hscb;
- ahd->next_queued_hscb_map = scb->hscb_map;
- scb->hscb = q_hscb;
- scb->hscb_map = q_hscb_map;
-
- /* Now define the mapping from tag to SCB in the scbindex */
- ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-void
-ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
-{
- ahd_swap_with_next_hscb(ahd, scb);
-
- if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
- panic("Attempt to queue invalid SCB tag %x\n",
- SCB_GET_TAG(scb));
-
- /*
- * Keep a history of SCBs we've downloaded in the qinfifo.
- */
- ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
- ahd->qinfifonext++;
-
- if (scb->sg_count != 0)
- ahd_setup_data_scb(ahd, scb);
- else
- ahd_setup_noxfer_scb(ahd, scb);
- ahd_setup_scb_common(ahd, scb);
-
- /*
- * Make sure our data is consistent from the
- * perspective of the adapter.
- */
- ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
-#ifdef AHD_DEBUG
- if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
- uint64_t host_dataptr;
-
- host_dataptr = ahd_le64toh(scb->hscb->dataptr);
- printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
- ahd_name(ahd),
- SCB_GET_TAG(scb), scb->hscb->scsiid,
- ahd_le32toh(scb->hscb->hscb_busaddr),
- (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
- (u_int)(host_dataptr & 0xFFFFFFFF),
- ahd_le32toh(scb->hscb->datacnt));
- }
-#endif
- /* Tell the adapter about the newly queued SCB */
- ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
-}
-
-/************************** Interrupt Processing ******************************/
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHD_RUN_QOUTFIFO 0x1
-#define AHD_RUN_TQINFIFO 0x2
-u_int
-ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
-{
- u_int retval;
-
- retval = 0;
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
- /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
- /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
- if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
- == ahd->qoutfifonext_valid_tag)
- retval |= AHD_RUN_QOUTFIFO;
-#ifdef AHD_TARGET_MODE
- if ((ahd->flags & AHD_TARGETROLE) != 0
- && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
- ahd->shared_data_map.dmamap,
- ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
- /*len*/sizeof(struct target_cmd),
- BUS_DMASYNC_POSTREAD);
- if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
- retval |= AHD_RUN_TQINFIFO;
- }
-#endif
- return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-int
-ahd_intr(struct ahd_softc *ahd)
-{
- u_int intstat;
-
- if ((ahd->pause & INTEN) == 0) {
- /*
- * Our interrupt is not enabled on the chip
- * and may be disabled for re-entrancy reasons,
- * so just return. This is likely just a shared
- * interrupt.
- */
- return (0);
- }
-
- /*
- * Instead of directly reading the interrupt status register,
- * infer the cause of the interrupt by checking our in-core
- * completion queues. This avoids a costly PCI bus read in
- * most cases.
- */
- if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
- && (ahd_check_cmdcmpltqueues(ahd) != 0))
- intstat = CMDCMPLT;
- else
- intstat = ahd_inb(ahd, INTSTAT);
-
- if ((intstat & INT_PEND) == 0)
- return (0);
-
- if (intstat & CMDCMPLT) {
- ahd_outb(ahd, CLRINT, CLRCMDINT);
-
- /*
- * Ensure that the chip sees that we've cleared
- * this interrupt before we walk the output fifo.
- * Otherwise, we may, due to posted bus writes,
- * clear the interrupt after we finish the scan,
- * and after the sequencer has added new entries
- * and asserted the interrupt again.
- */
- if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
- if (ahd_is_paused(ahd)) {
- /*
- * Potentially lost SEQINT.
- * If SEQINTCODE is non-zero,
- * simulate the SEQINT.
- */
- if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
- intstat |= SEQINT;
- }
- } else {
- ahd_flush_device_writes(ahd);
- }
- ahd_run_qoutfifo(ahd);
- ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
- ahd->cmdcmplt_total++;
-#ifdef AHD_TARGET_MODE
- if ((ahd->flags & AHD_TARGETROLE) != 0)
- ahd_run_tqinfifo(ahd, /*paused*/FALSE);
-#endif
- }
-
- /*
- * Handle statuses that may invalidate our cached
- * copy of INTSTAT separately.
- */
- if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
- /* Hot eject. Do nothing */
- } else if (intstat & HWERRINT) {
- ahd_handle_hwerrint(ahd);
- } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
- ahd->bus_intr(ahd);
- } else {
-
- if ((intstat & SEQINT) != 0)
- ahd_handle_seqint(ahd, intstat);
-
- if ((intstat & SCSIINT) != 0)
- ahd_handle_scsiint(ahd, intstat);
- }
- return (1);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.h Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.h Tue Apr 11 09:46:50 2006
@@ -149,10 +149,6 @@ ahd_pause(struct ahd_softc *ahd)
void *ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
void *sgptr, dma_addr_t addr,
bus_size_t len, int last);
-void ahd_setup_scb_common(struct ahd_softc *ahd,
- struct scb *scb);
-void ahd_setup_data_scb(struct ahd_softc *ahd,
- struct scb *scb);
static __inline void ahd_setup_noxfer_scb(struct ahd_softc *ahd,
struct scb *scb);
@@ -279,16 +275,11 @@ static __inline u_int ahd_get_sescb_qoff
static __inline void ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value);
static __inline u_int ahd_get_sdscb_qoff(struct ahd_softc *ahd);
static __inline void ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline u_int ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint32_t
- ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint64_t
- ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
-struct scb *
- ahd_lookup_scb(struct ahd_softc *ahd, u_int tag);
-void ahd_swap_with_next_hscb(struct ahd_softc *ahd,
- struct scb *scb);
+u_int ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
+u_int ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
+uint32_t ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
+uint64_t ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
+struct scb *ahd_lookup_scb(struct ahd_softc *ahd, u_int tag);
void ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb);
static __inline uint8_t *
ahd_get_sense_buf(struct ahd_softc *ahd,
@@ -437,52 +428,6 @@ ahd_set_sdscb_qoff(struct ahd_softc *ahd
ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
}
-static __inline u_int
-ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
-{
- u_int value;
-
- /*
- * Workaround PCI-X Rev A. hardware bug.
- * After a host read of SCB memory, the chip
- * may become confused into thinking prefetch
- * was required. This starts the discard timer
- * running and can cause an unexpected discard
- * timer interrupt. The work around is to read
- * a normal register prior to the exhaustion of
- * the discard timer. The mode pointer register
- * has no side effects and so serves well for
- * this purpose.
- *
- * Razor #528
- */
- value = ahd_inb(ahd, offset);
- if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
- ahd_inb(ahd, MODE_PTR);
- return (value);
-}
-
-static __inline u_int
-ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inb_scbram(ahd, offset)
- | (ahd_inb_scbram(ahd, offset+1) << 8));
-}
-
-static __inline uint32_t
-ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inw_scbram(ahd, offset)
- | (ahd_inw_scbram(ahd, offset+2) << 16));
-}
-
-static __inline uint64_t
-ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inl_scbram(ahd, offset)
- | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
-}
-
static __inline uint8_t *
ahd_get_sense_buf(struct ahd_softc *ahd, struct scb *scb)
{
@@ -498,7 +443,6 @@ ahd_get_sense_bufaddr(struct ahd_softc *
/************************** Interrupt Processing ******************************/
static __inline void ahd_sync_qoutfifo(struct ahd_softc *ahd, int op);
static __inline void ahd_sync_tqinfifo(struct ahd_softc *ahd, int op);
-u_int ahd_check_cmdcmpltqueues(struct ahd_softc *ahd);
int ahd_intr(struct ahd_softc *ahd);
static __inline void
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm.h Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm.h Tue Apr 11 09:46:50 2006
@@ -222,13 +222,6 @@ typedef struct timer_list ahd_timer_t;
#endif
#include "aic79xx.h"
-/***************************** Timer Facilities *******************************/
-#define ahd_timer_init init_timer
-#define ahd_timer_stop del_timer_sync
-typedef void ahd_linux_callback_t (u_long);
-void ahd_timer_reset(ahd_timer_t *timer, int usec,
- ahd_callback_t *func, void *arg);
-
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
@@ -386,7 +379,10 @@ struct ahd_platform_data {
#define malloc(size, type, flags) kmalloc(size, flags)
#define free(ptr, type) kfree(ptr)
-void ahd_delay(long);
+static inline void ahd_delay(int usec)
+{
+ udelay(usec);
+}
/***************************** Low Level I/O **********************************/
uint8_t ahd_inb(struct ahd_softc * ahd, long port);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm_o.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm_o.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm_o.c Tue Apr 11 10:07:56 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm_o.c Thu Jan 1 03:00:00 1970
@@ -1,116 +0,0 @@
-/*
- * Adaptec AIC79xx device driver for Linux.
- *
- * Formerly inlined routines from aic79xx_osm.h are moved here.
- * This file is #included into aic79xx_core.c
- */
-
-/***************************** Timer Facilities *******************************/
-void
-ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
-{
- struct ahd_softc *ahd;
-
- ahd = (struct ahd_softc *)arg;
- del_timer(timer);
- timer->data = (u_long)arg;
- timer->expires = jiffies + (usec * HZ)/1000000;
- timer->function = (ahd_linux_callback_t*)func;
- add_timer(timer);
-}
-
-/************************** OS Utility Wrappers *******************************/
-void
-ahd_delay(long usec)
-{
- /*
- * udelay on Linux can have problems for
- * multi-millisecond waits. Wait at most
- * 1024us per call.
- */
- udelay(usec & 1023);
- usec >>= 10;
- while (usec > 0) {
- udelay(1024);
- usec--;
- }
-}
-
-/***************************** Low Level I/O **********************************/
-uint8_t
-ahd_inb(struct ahd_softc * ahd, long port)
-{
- uint8_t x;
-
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- x = readb(ahd->bshs[0].maddr + port);
- } else {
- x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
- }
- mb();
- return (x);
-}
-
-uint16_t
-ahd_inw_atomic(struct ahd_softc * ahd, long port)
-{
- uint8_t x;
-
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- x = readw(ahd->bshs[0].maddr + port);
- } else {
- x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
- }
- mb();
- return (x);
-}
-
-void
-ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
-{
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- writeb(val, ahd->bshs[0].maddr + port);
- } else {
- outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
- }
- mb();
-}
-
-void
-ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
-{
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- writew(val, ahd->bshs[0].maddr + port);
- } else {
- outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
- }
- mb();
-}
-
-void
-ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- ahd_outb(ahd, port, *array++);
-}
-
-void
-ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- *array++ = ahd_inb(ahd, port);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_pci.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_pci.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_pci.c Mon Mar 20 07:53:29 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_pci.c Tue Apr 11 09:46:50 2006
@@ -51,6 +51,8 @@
#include "aic79xx_pci.h"
+static void ahd_pci_intr(struct ahd_softc *ahd);
+
static __inline uint64_t
ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
{
@@ -757,7 +759,7 @@ static const char *pci_status_strings[]
"%s: Address or Write Phase Parity Error Detected in %s.\n"
};
-void
+static void
ahd_pci_intr(struct ahd_softc *ahd)
{
uint8_t pci_status[8];
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_core.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_core.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_core.c Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_core.c Tue Apr 11 09:46:50 2006
@@ -50,9 +50,364 @@
#include <dev/aic7xxx/aicasm/aicasm_insformat.h>
#endif
-/* Were inlined, but moved out-of-line because they are HUGE: */
-#include "aic7xxx_osm_o.c"
-#include "aic7xxx_inline.c"
+/***************************** Low Level I/O **********************************/
+uint8_t
+ahc_inb(struct ahc_softc * ahc, long port)
+{
+ uint8_t x;
+
+ if (ahc->tag == BUS_SPACE_MEMIO) {
+ x = readb(ahc->bsh.maddr + port);
+ } else {
+ x = inb(ahc->bsh.ioport + port);
+ }
+ mb();
+ return (x);
+}
+
+void
+ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
+{
+ if (ahc->tag == BUS_SPACE_MEMIO) {
+ writeb(val, ahc->bsh.maddr + port);
+ } else {
+ outb(val, ahc->bsh.ioport + port);
+ }
+ mb();
+}
+
+void
+ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahc_outb(ahc, port, *array++);
+}
+
+void
+ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahc_inb(ahc, port);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+uint16_t
+ahc_inw(struct ahc_softc *ahc, u_int port)
+{
+ return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port));
+}
+
+void
+ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
+{
+ ahc_outb(ahc, port, value & 0xFF);
+ ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahc_inl(struct ahc_softc *ahc, u_int port)
+{
+ return ((ahc_inb(ahc, port))
+ | (ahc_inb(ahc, port+1) << 8)
+ | (ahc_inb(ahc, port+2) << 16)
+ | (ahc_inb(ahc, port+3) << 24));
+}
+
+void
+ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
+{
+ ahc_outb(ahc, port, (value) & 0xFF);
+ ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
+ ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
+ ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahc_inq(struct ahc_softc *ahc, u_int port)
+{
+ return ((ahc_inb(ahc, port))
+ | (ahc_inb(ahc, port+1) << 8)
+ | (ahc_inb(ahc, port+2) << 16)
+ | (ahc_inb(ahc, port+3) << 24)
+ | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
+ | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
+ | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
+ | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
+}
+
+void
+ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
+{
+ ahc_outb(ahc, port, value & 0xFF);
+ ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+ ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
+ ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
+ ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
+ ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
+ ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
+ ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
+}
+
+/*
+ * Get a free scb. If there are none, see if we can allocate a new SCB.
+ */
+struct scb *
+ahc_get_scb(struct ahc_softc *ahc)
+{
+ struct scb *scb;
+
+ if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
+ ahc_alloc_scbs(ahc);
+ scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
+ if (scb == NULL)
+ return (NULL);
+ }
+ SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
+ return (scb);
+}
+
+/*
+ * Return an SCB resource to the free list.
+ */
+void
+ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+ struct hardware_scb *hscb;
+
+ hscb = scb->hscb;
+ /* Clean up for the next user */
+ ahc->scb_data->scbindex[hscb->tag] = NULL;
+ scb->flags = SCB_FREE;
+ hscb->control = 0;
+
+ SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
+
+ /* Notify the OSM that a resource is now available. */
+ ahc_platform_scb_free(ahc, scb);
+}
+
+struct scb *
+ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
+{
+ struct scb* scb;
+
+ scb = ahc->scb_data->scbindex[tag];
+ if (scb != NULL)
+ ahc_sync_scb(ahc, scb,
+ BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+ return (scb);
+}
+
+static void
+ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
+{
+ struct hardware_scb *q_hscb;
+ u_int saved_tag;
+
+ /*
+ * Our queuing method is a bit tricky. The card
+ * knows in advance which HSCB to download, and we
+ * can't disappoint it. To achieve this, the next
+ * SCB to download is saved off in ahc->next_queued_scb.
+ * When we are called to queue "an arbitrary scb",
+ * we copy the contents of the incoming HSCB to the one
+ * the sequencer knows about, swap HSCB pointers and
+ * finally assign the SCB to the tag indexed location
+ * in the scb_array. This makes sure that we can still
+ * locate the correct SCB by SCB_TAG.
+ */
+ q_hscb = ahc->next_queued_scb->hscb;
+ saved_tag = q_hscb->tag;
+ memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+ if ((scb->flags & SCB_CDB32_PTR) != 0) {
+ q_hscb->shared_data.cdb_ptr =
+ ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
+ + offsetof(struct hardware_scb, cdb32));
+ }
+ q_hscb->tag = saved_tag;
+ q_hscb->next = scb->hscb->tag;
+
+ /* Now swap HSCB pointers. */
+ ahc->next_queued_scb->hscb = scb->hscb;
+ scb->hscb = q_hscb;
+
+ /* Now define the mapping from tag to SCB in the scbindex */
+ ahc->scb_data->scbindex[scb->hscb->tag] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+ ahc_swap_with_next_hscb(ahc, scb);
+
+ if (scb->hscb->tag == SCB_LIST_NULL
+ || scb->hscb->next == SCB_LIST_NULL)
+ panic("Attempt to queue invalid SCB tag %x:%x\n",
+ scb->hscb->tag, scb->hscb->next);
+
+ /*
+ * Setup data "oddness".
+ */
+ scb->hscb->lun &= LID;
+ if (ahc_get_transfer_length(scb) & 0x1)
+ scb->hscb->lun |= SCB_XFERLEN_ODD;
+
+ /*
+ * Keep a history of SCBs we've downloaded in the qinfifo.
+ */
+ ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
+
+ /*
+ * Make sure our data is consistent from the
+ * perspective of the adapter.
+ */
+ ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+ /* Tell the adapter about the newly queued SCB */
+ if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+ ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+ } else {
+ if ((ahc->features & AHC_AUTOPAUSE) == 0)
+ ahc_pause(ahc);
+ ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+ if ((ahc->features & AHC_AUTOPAUSE) == 0)
+ ahc_unpause(ahc);
+ }
+}
+
+/************************** Interrupt Processing ******************************/
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHC_RUN_QOUTFIFO 0x1
+#define AHC_RUN_TQINFIFO 0x2
+static u_int
+ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
+{
+ u_int retval;
+
+ retval = 0;
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+ /*offset*/ahc->qoutfifonext, /*len*/1,
+ BUS_DMASYNC_POSTREAD);
+ if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
+ retval |= AHC_RUN_QOUTFIFO;
+#ifdef AHC_TARGET_MODE
+ if ((ahc->flags & AHC_TARGETROLE) != 0
+ && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+ ahc->shared_data_dmamap,
+ ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
+ /*len*/sizeof(struct target_cmd),
+ BUS_DMASYNC_POSTREAD);
+ if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
+ retval |= AHC_RUN_TQINFIFO;
+ }
+#endif
+ return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahc_intr(struct ahc_softc *ahc)
+{
+ u_int intstat;
+
+ if ((ahc->pause & INTEN) == 0) {
+ /*
+ * Our interrupt is not enabled on the chip
+ * and may be disabled for re-entrancy reasons,
+ * so just return. This is likely just a shared
+ * interrupt.
+ */
+ return (0);
+ }
+ /*
+ * Instead of directly reading the interrupt status register,
+ * infer the cause of the interrupt by checking our in-core
+ * completion queues. This avoids a costly PCI bus read in
+ * most cases.
+ */
+ if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
+ && (ahc_check_cmdcmpltqueues(ahc) != 0))
+ intstat = CMDCMPLT;
+ else {
+ intstat = ahc_inb(ahc, INTSTAT);
+ }
+
+ if ((intstat & INT_PEND) == 0) {
+#if AHC_PCI_CONFIG > 0
+ if (ahc->unsolicited_ints > 500) {
+ ahc->unsolicited_ints = 0;
+ if ((ahc->chip & AHC_PCI) != 0
+ && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
+ ahc->bus_intr(ahc);
+ }
+#endif
+ ahc->unsolicited_ints++;
+ return (0);
+ }
+ ahc->unsolicited_ints = 0;
+
+ if (intstat & CMDCMPLT) {
+ ahc_outb(ahc, CLRINT, CLRCMDINT);
+
+ /*
+ * Ensure that the chip sees that we've cleared
+ * this interrupt before we walk the output fifo.
+ * Otherwise, we may, due to posted bus writes,
+ * clear the interrupt after we finish the scan,
+ * and after the sequencer has added new entries
+ * and asserted the interrupt again.
+ */
+ ahc_flush_device_writes(ahc);
+ ahc_run_qoutfifo(ahc);
+#ifdef AHC_TARGET_MODE
+ if ((ahc->flags & AHC_TARGETROLE) != 0)
+ ahc_run_tqinfifo(ahc, /*paused*/FALSE);
+#endif
+ }
+
+ /*
+ * Handle statuses that may invalidate our cached
+ * copy of INTSTAT separately.
+ */
+ if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
+ /* Hot eject. Do nothing */
+ } else if (intstat & BRKADRINT) {
+ ahc_handle_brkadrint(ahc);
+ } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
+
+ ahc_pause_bug_fix(ahc);
+
+ if ((intstat & SEQINT) != 0)
+ ahc_handle_seqint(ahc, intstat);
+
+ if ((intstat & SCSIINT) != 0)
+ ahc_handle_scsiint(ahc, intstat);
+ }
+ return (1);
+}
/***************************** Lookup Tables **********************************/
char *ahc_chip_names[] =
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.c Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.c Thu Jan 1 03:00:00 1970
@@ -1,311 +0,0 @@
-/*
- * Routines shareable across OS platforms.
- *
- * Formerly inlined routines from aic7xxx_inline.h are moved here.
- * This file is #included into aic7xxx_core.c
- */
-
-/*********************** Miscelaneous Support Functions ***********************/
-uint16_t
-ahc_inw(struct ahc_softc *ahc, u_int port)
-{
- return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port));
-}
-
-void
-ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
-{
- ahc_outb(ahc, port, value & 0xFF);
- ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
-}
-
-uint32_t
-ahc_inl(struct ahc_softc *ahc, u_int port)
-{
- return ((ahc_inb(ahc, port))
- | (ahc_inb(ahc, port+1) << 8)
- | (ahc_inb(ahc, port+2) << 16)
- | (ahc_inb(ahc, port+3) << 24));
-}
-
-void
-ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
-{
- ahc_outb(ahc, port, (value) & 0xFF);
- ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
- ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
- ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
-}
-
-uint64_t
-ahc_inq(struct ahc_softc *ahc, u_int port)
-{
- return ((ahc_inb(ahc, port))
- | (ahc_inb(ahc, port+1) << 8)
- | (ahc_inb(ahc, port+2) << 16)
- | (ahc_inb(ahc, port+3) << 24)
- | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
- | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
- | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
- | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
-}
-
-void
-ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
-{
- ahc_outb(ahc, port, value & 0xFF);
- ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
- ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
- ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
- ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
- ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
- ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
- ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
-}
-
-/*
- * Get a free scb. If there are none, see if we can allocate a new SCB.
- */
-struct scb *
-ahc_get_scb(struct ahc_softc *ahc)
-{
- struct scb *scb;
-
- if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
- ahc_alloc_scbs(ahc);
- scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
- if (scb == NULL)
- return (NULL);
- }
- SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
- return (scb);
-}
-
-/*
- * Return an SCB resource to the free list.
- */
-void
-ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
-{
- struct hardware_scb *hscb;
-
- hscb = scb->hscb;
- /* Clean up for the next user */
- ahc->scb_data->scbindex[hscb->tag] = NULL;
- scb->flags = SCB_FREE;
- hscb->control = 0;
-
- SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
-
- /* Notify the OSM that a resource is now available. */
- ahc_platform_scb_free(ahc, scb);
-}
-
-struct scb *
-ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
-{
- struct scb* scb;
-
- scb = ahc->scb_data->scbindex[tag];
- if (scb != NULL)
- ahc_sync_scb(ahc, scb,
- BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
- return (scb);
-}
-
-void
-ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
-{
- struct hardware_scb *q_hscb;
- u_int saved_tag;
-
- /*
- * Our queuing method is a bit tricky. The card
- * knows in advance which HSCB to download, and we
- * can't disappoint it. To achieve this, the next
- * SCB to download is saved off in ahc->next_queued_scb.
- * When we are called to queue "an arbitrary scb",
- * we copy the contents of the incoming HSCB to the one
- * the sequencer knows about, swap HSCB pointers and
- * finally assign the SCB to the tag indexed location
- * in the scb_array. This makes sure that we can still
- * locate the correct SCB by SCB_TAG.
- */
- q_hscb = ahc->next_queued_scb->hscb;
- saved_tag = q_hscb->tag;
- memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
- if ((scb->flags & SCB_CDB32_PTR) != 0) {
- q_hscb->shared_data.cdb_ptr =
- ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
- + offsetof(struct hardware_scb, cdb32));
- }
- q_hscb->tag = saved_tag;
- q_hscb->next = scb->hscb->tag;
-
- /* Now swap HSCB pointers. */
- ahc->next_queued_scb->hscb = scb->hscb;
- scb->hscb = q_hscb;
-
- /* Now define the mapping from tag to SCB in the scbindex */
- ahc->scb_data->scbindex[scb->hscb->tag] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-void
-ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
-{
- ahc_swap_with_next_hscb(ahc, scb);
-
- if (scb->hscb->tag == SCB_LIST_NULL
- || scb->hscb->next == SCB_LIST_NULL)
- panic("Attempt to queue invalid SCB tag %x:%x\n",
- scb->hscb->tag, scb->hscb->next);
-
- /*
- * Setup data "oddness".
- */
- scb->hscb->lun &= LID;
- if (ahc_get_transfer_length(scb) & 0x1)
- scb->hscb->lun |= SCB_XFERLEN_ODD;
-
- /*
- * Keep a history of SCBs we've downloaded in the qinfifo.
- */
- ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
-
- /*
- * Make sure our data is consistent from the
- * perspective of the adapter.
- */
- ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
- /* Tell the adapter about the newly queued SCB */
- if ((ahc->features & AHC_QUEUE_REGS) != 0) {
- ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
- } else {
- if ((ahc->features & AHC_AUTOPAUSE) == 0)
- ahc_pause(ahc);
- ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
- if ((ahc->features & AHC_AUTOPAUSE) == 0)
- ahc_unpause(ahc);
- }
-}
-
-/************************** Interrupt Processing ******************************/
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHC_RUN_QOUTFIFO 0x1
-#define AHC_RUN_TQINFIFO 0x2
-u_int
-ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
-{
- u_int retval;
-
- retval = 0;
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
- /*offset*/ahc->qoutfifonext, /*len*/1,
- BUS_DMASYNC_POSTREAD);
- if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
- retval |= AHC_RUN_QOUTFIFO;
-#ifdef AHC_TARGET_MODE
- if ((ahc->flags & AHC_TARGETROLE) != 0
- && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
- ahc->shared_data_dmamap,
- ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
- /*len*/sizeof(struct target_cmd),
- BUS_DMASYNC_POSTREAD);
- if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
- retval |= AHC_RUN_TQINFIFO;
- }
-#endif
- return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-int
-ahc_intr(struct ahc_softc *ahc)
-{
- u_int intstat;
-
- if ((ahc->pause & INTEN) == 0) {
- /*
- * Our interrupt is not enabled on the chip
- * and may be disabled for re-entrancy reasons,
- * so just return. This is likely just a shared
- * interrupt.
- */
- return (0);
- }
- /*
- * Instead of directly reading the interrupt status register,
- * infer the cause of the interrupt by checking our in-core
- * completion queues. This avoids a costly PCI bus read in
- * most cases.
- */
- if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
- && (ahc_check_cmdcmpltqueues(ahc) != 0))
- intstat = CMDCMPLT;
- else {
- intstat = ahc_inb(ahc, INTSTAT);
- }
-
- if ((intstat & INT_PEND) == 0) {
-#if AHC_PCI_CONFIG > 0
- if (ahc->unsolicited_ints > 500) {
- ahc->unsolicited_ints = 0;
- if ((ahc->chip & AHC_PCI) != 0
- && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
- ahc->bus_intr(ahc);
- }
-#endif
- ahc->unsolicited_ints++;
- return (0);
- }
- ahc->unsolicited_ints = 0;
-
- if (intstat & CMDCMPLT) {
- ahc_outb(ahc, CLRINT, CLRCMDINT);
-
- /*
- * Ensure that the chip sees that we've cleared
- * this interrupt before we walk the output fifo.
- * Otherwise, we may, due to posted bus writes,
- * clear the interrupt after we finish the scan,
- * and after the sequencer has added new entries
- * and asserted the interrupt again.
- */
- ahc_flush_device_writes(ahc);
- ahc_run_qoutfifo(ahc);
-#ifdef AHC_TARGET_MODE
- if ((ahc->flags & AHC_TARGETROLE) != 0)
- ahc_run_tqinfifo(ahc, /*paused*/FALSE);
-#endif
- }
-
- /*
- * Handle statuses that may invalidate our cached
- * copy of INTSTAT separately.
- */
- if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
- /* Hot eject. Do nothing */
- } else if (intstat & BRKADRINT) {
- ahc_handle_brkadrint(ahc);
- } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
-
- ahc_pause_bug_fix(ahc);
-
- if ((intstat & SEQINT) != 0)
- ahc_handle_seqint(ahc, intstat);
-
- if ((intstat & SCSIINT) != 0)
- ahc_handle_scsiint(ahc, intstat);
- }
- return (1);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.h Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.h Tue Apr 11 09:46:50 2006
@@ -249,8 +249,6 @@ struct scb*
void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb);
struct scb *
ahc_lookup_scb(struct ahc_softc *ahc, u_int tag);
-void ahc_swap_with_next_hscb(struct ahc_softc *ahc,
- struct scb *scb);
void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb);
static __inline struct scsi_sense_data *
ahc_get_sense_buf(struct ahc_softc *ahc,
@@ -315,7 +313,6 @@ ahc_get_sense_bufaddr(struct ahc_softc *
/************************** Interrupt Processing ******************************/
static __inline void ahc_sync_qoutfifo(struct ahc_softc *ahc, int op);
static __inline void ahc_sync_tqinfifo(struct ahc_softc *ahc, int op);
-u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc);
int ahc_intr(struct ahc_softc *ahc);
static __inline void
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm.h Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm.h Tue Apr 11 09:46:50 2006
@@ -387,7 +387,10 @@ struct ahc_platform_data {
#define malloc(size, type, flags) kmalloc(size, flags)
#define free(ptr, type) kfree(ptr)
-void ahc_delay(long);
+static inline void ahc_delay(int usec)
+{
+ udelay(usec);
+}
/***************************** Low Level I/O **********************************/
uint8_t ahc_inb(struct ahc_softc * ahc, long port);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm_o.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm_o.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm_o.c Tue Apr 11 10:07:56 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm_o.c Thu Jan 1 03:00:00 1970
@@ -1,77 +0,0 @@
-/*
- * Adaptec AIC7xxx device driver for Linux.
- *
- * Formerly inlined routines from aic7xxx_osm.h are moved here.
- * This file is #included into aic7xxx_core.c
- */
-
-/************************** OS Utility Wrappers *******************************/
-void
-ahc_delay(long usec)
-{
- /*
- * udelay on Linux can have problems for
- * multi-millisecond waits. Wait at most
- * 1024us per call.
- */
- udelay(usec & 1023);
- usec >>= 10;
- while (usec > 0) {
- udelay(1024);
- usec--;
- }
-}
-
-/***************************** Low Level I/O **********************************/
-uint8_t
-ahc_inb(struct ahc_softc * ahc, long port)
-{
- uint8_t x;
-
- if (ahc->tag == BUS_SPACE_MEMIO) {
- x = readb(ahc->bsh.maddr + port);
- } else {
- x = inb(ahc->bsh.ioport + port);
- }
- mb();
- return (x);
-}
-
-void
-ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
-{
- if (ahc->tag == BUS_SPACE_MEMIO) {
- writeb(val, ahc->bsh.maddr + port);
- } else {
- outb(val, ahc->bsh.ioport + port);
- }
- mb();
-}
-
-void
-ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- ahc_outb(ahc, port, *array++);
-}
-
-void
-ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- *array++ = ahc_inb(ahc, port);
-}
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
