Am Dienstag, 28. Februar 2006 20:59 schrieb Jesper Juhl:
> Hi everyone,
>
> This is a continuation of the issue I initially reported in the "make
> -j with j <= 4 seems to only load a single CPU core" thread
> (http://lkml.org/lkml/2006/2/21/231).
>
> I've now got some more data, so hopefully someone can help me get a
> handle on this thing.
>
> In a nutshell the problem is that I need to run "make -j N" where N is
>
> >= 5 in order to put maximum load on both cores of my Athlon 64 X2
>
> 4400+ when building kernels and with N < 5 the build apears to be
> pretty much done serially and not at all parallel. This baffles me to
> be honest.
> The expected behaviour is that running with "make -j 2" on an
> otherwise idle machine would schedule a CC to run on each core most of
> the time, and with "make -j 3" & "make -j 4" there should definately
> be something executing on both cores all the time.
> What I see is that unless I bump it up to -j 5 or greater only one
> core seems to be put to work and the other one mostly just sits around
> spinning its wheels doing nothing.
>
> To try and gather some data on this I ran the following in a
> 2.6.16-rc5-mm1 source tree :
>
> $ for i in `seq 1 6`; do make distclean ; make allnoconfig ; sleep 1 ;
> vmstat 5 2>&1 > vmstat$i.log & sleep 1 ; time nice make -j $i 2>&1 |
> tee build$i.log ; sleep 1 ; killall vmstat ; done
>
> The timing information clearly show a distinct difference between "-j
> 4" and "-j 5" :
>
> "make -j 1" run :
> real 1m20.454s
> user 0m56.836s
> sys 0m12.023s
>
> "make -j 2" run :
> real 1m13.786s
> user 0m56.723s
> sys 0m12.164s
>
> "make -j 3" run :
> real 1m14.208s
> user 0m56.960s
> sys 0m11.912s
>
> "make -j 4" run :
> real 1m14.689s
> user 0m56.897s
> sys 0m12.062s
>
> "make -j 5" run :
> real 0m47.613s
> user 0m57.118s
> sys 0m12.503s
>
> "make -j 6" run :
> real 0m47.750s
> user 0m57.096s
> sys 0m12.516s
>
>
> The "make -j 1" run is slightly slower than the 2, 3 & 4 ones. The 2,
> 3 & 4 runs are more or less identical. But when we get to the 5 & 6
> runs we finally see both cores getting some useful work done and the
> build time improves significantly (note, I did the "-j 6" run just to
> show that going beyong 5 doesn't seem to change things).
>
> Dick Johnson suggested in the previous thread that my problem might be
> due to an I/O bottleneck (but I don't think that's the case), so
> that's why I decided to have vmstat running in the background during
> the builds to get a little data on that (it also shows quite nicely
> that aproximately half the CPU resources are not getting utilized
> until we get to "make -j 5").
>
> Here's the vmstat data :
>
> $ cat vmstat1.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 0 0 0 1601296 48296 175492 0 0 286 59 531
> 206 6 3 82 10 1 0 0 1584208 49292 179188 0 0 326 464
> 1069 424 23 10 50 18 2 0 0 1584672 50364 180428 0 0 110
> 550 1045 360 43 7 39 11 1 0 0 1578096 51268 181292 0 0
> 45 474 1042 439 50 10 33 8 1 0 0 1571188 52296 182780 0 0
> 160 492 1046 386 45 7 38 9 2 0 0 1576412 53188 183656 0
> 0 78 452 1036 333 48 7 41 4 1 0 0 1570780 54044 184432
> 0 0 58 490 1050 383 46 8 37 9 1 0 0 1570180 54976 185404
> 0 0 65 521 1043 307 44 6 38 12 1 0 0 1572244 55784
> 186228 0 0 86 394 1033 323 47 7 42 5 1 0 0 1559940
> 56704 187144 0 0 81 447 1059 428 51 5 37 7 1 0 0
> 1558040 57508 187768 0 0 62 332 1051 495 59 6 33 3 1 0
> 0 1565836 58336 188640 0 0 54 351 1052 551 56 8 33 3 1 0
> 0 1559440 59424 189796 0 0 62 586 1055 449 50 7 36 7 1
> 0 0 1551172 60376 190680 0 0 61 512 1050 405 48 8 33 12
> 1 0 0 1553376 61196 191696 0 0 77 355 1023 353 50 7 39
> 5 0 1 0 1555624 62304 192900 0 0 36 621 1036 475 52 10
> 31 7 0 2 0 1547804 63476 198324 0 0 71 1027 1038 520 52
> 11 30 7
>
>
> $ cat vmstat2.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 0 0 0 1568828 64716 184844 0 0 235 109 530
> 208 13 4 73 10 1 0 0 1564056 64728 186260 0 0 0 695
> 1067 430 34 11 39 15 1 0 0 1555020 64736 186728 0 0 0
> 485 1035 381 50 8 37 4 1 0 0 1549500 64748 187532 0 0
> 0 455 1028 477 56 11 30 2 0 1 0 1560680 64760 187996 0 0
> 1 514 1026 313 49 7 40 4 1 0 0 1555364 64768 188396 0
> 0 0 461 1026 384 51 8 38 3 2 0 0 1550752 64776 189136 0
> 0 0 289 1029 366 52 8 37 3 1 0 0 1549824 64784 189536
> 0 0 0 258 1031 303 48 7 38 7 1 0 0 1551600 64792
> 189936 0 0 0 470 1046 268 43 5 41 11 1 0 0 1549540
> 64800 190336 0 0 0 494 1042 302 52 6 41 1 1 0 0
> 1549728 64808 190804 0 0 0 388 1030 354 51 7 39 3 1 0
> 0 1549532 64820 191608 0 0 0 474 1041 384 51 8 38 3 1 0
> 0 1548908 64836 192136 0 0 0 531 1043 361 48 8 37 6 4
> 0 0 1553396 64844 192944 0 0 0 359 1023 361 53 7 40 0
> 1 0 0 1551280 64852 193820 0 0 0 658 1052 462 50 10 31
> 9 0 0 0 1544148 64884 202152 0 0 0 496 1033 528 51 11
> 35 3
>
>
> $ cat vmstat3.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 0 3 0 1567996 64904 184928 0 0 198 142 529
> 207 18 5 67 10 1 0 0 1554976 64916 186548 0 0 0 239
> 1099 464 40 12 31 18 3 0 0 1562264 64924 186880 0 0 0
> 759 1056 345 42 8 37 13 1 0 0 1552476 64932 187688 0 0
> 0 416 1033 462 54 11 32 4 2 0 0 1561064 64940 188156 0 0
> 0 661 1058 294 45 6 41 7 1 0 0 1557116 64948 188488 0
> 0 0 451 1033 316 48 7 40 5 1 0 0 1553528 64956 189228 0
> 0 0 453 1036 374 52 8 37 3 2 0 0 1555884 64964 189628
> 0 0 0 379 1022 348 53 8 37 3 1 0 0 1552480 64976
> 190160 0 0 1 488 1037 271 49 6 41 5 1 0 0 1549816
> 64984 190492 0 0 0 427 1036 284 52 6 39 3 1 0 0
> 1550748 64992 190960 0 0 0 398 1033 342 50 8 38 4 1 0
> 0 1550820 65004 191832 0 0 0 474 1032 387 54 8 36 2 1 0
> 0 1546484 65012 192368 0 0 0 534 1045 388 51 8 37 4 2
> 0 0 1548228 65020 193176 0 0 0 419 1029 351 51 7 39 3
> 1 0 0 1545136 65028 193916 0 0 0 608 1047 432 51 9 34
> 7
>
>
> $ cat vmstat4.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 1 0 0 1567896 65088 185084 0 0 170 168 529
> 205 22 5 62 10 1 0 0 1553288 65096 186504 0 0 0 574
> 1040 437 35 11 45 9 1 0 0 1558744 65104 187040 0 0 0
> 527 1045 373 49 8 37 6 2 0 0 1558024 65112 187848 0 0
> 0 559 1040 444 52 11 32 6 1 0 0 1552320 65120 188248 0 0
> 0 486 1036 309 46 6 41 6 1 0 0 1555052 65128 188648 0
> 0 0 337 1023 353 51 7 40 3 1 0 0 1558096 65136 189388 0
> 0 0 525 1028 393 54 9 37 0 0 1 0 1550844 65144 189788
> 0 0 0 406 1029 341 51 7 38 4 1 1 0 1549176 65152
> 190324 0 0 0 330 1027 275 49 5 43 2 1 0 0 1552092
> 65160 190588 0 0 0 298 1049 251 40 5 43 12 2 0 0
> 1551660 65168 190988 0 0 0 371 1030 323 48 6 41 4 1 0
> 0 1548632 65180 191928 0 0 1 318 1019 395 54 9 37 0 1 0
> 0 1545100 65180 192404 0 0 0 587 1047 397 52 9 36 4 1
> 0 0 1548332 65188 193076 0 0 0 481 1041 300 47 6 42 5
> 1 0 0 1545900 65196 194020 0 0 0 490 1039 444 50 10 32
> 8 1 0 0 1540988 65216 199032 0 0 0 529 1040 547 55 12
> 29 4
>
>
> $ cat vmstat5.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 1 0 0 1567272 65252 185260 0 0 149 188 528
> 204 24 6 59 10 5 0 0 1557680 65260 186748 0 0 0 669
> 1059 609 46 13 30 12 4 0 0 1542556 65268 187556 0 0 0
> 450 1056 724 85 14 0 1 4 1 0 1557872 65268 188372 0 0
> 0 549 1050 577 82 13 0 5 0 6 0 1528352 65276 189180 0 0
> 0 618 1029 492 85 12 0 3 3 1 0 1540072 65292 189912 0
> 0 0 168 1040 454 79 13 0 8 3 0 0 1532288 65312 190980 0
> 0 0 388 1028 478 88 12 0 0 4 0 0 1539840 65320 191720
> 0 0 0 706 1054 513 74 13 3 11 3 0 0 1538432 65328
> 192596 0 0 0 477 1037 518 85 14 0 1 4 0 0 1536152
> 65340 193876 0 0 0 634 1053 514 81 12 3 5
>
>
> $ cat vmstat6.log
> procs -----------memory---------- ---swap-- -----io---- --system--
> ----cpu---- r b swpd free buff cache si so bi bo in
> cs us sy id wa 1 0 0 1566872 65384 185468 0 0 137 201 528
> 209 28 6 56 10 0 3 0 1552864 65400 187016 0 0 1 750
> 1047 505 48 14 30 8 1 3 0 1549040 65408 187756 0 0 0
> 609 1054 452 81 11 2 5 1 3 0 1540672 65416 188496 0 0
> 0 574 1032 473 83 14 0 3 4 1 0 1541544 65424 189304 0 0
> 0 176 1033 503 77 14 0 9 5 0 0 1540624 65432 190316 0
> 0 0 418 1035 481 80 12 0 8 3 0 0 1539580 65444 191120 0
> 0 0 673 1053 430 77 10 0 12 4 0 0 1535676 65452 191996
> 0 0 0 648 1058 506 76 15 1 9 4 0 0 1534440 65460
> 192736 0 0 0 508 1038 477 84 13 1 2 3 0 0 1536492
> 65468 194156 0 0 0 418 1020 549 86 14 0 0
>
>
> To show that the builds with -j 1, 2, 3 & 4 all seem to be quite
> serial but that the -j 5 & 6 builds seem to be parallel here are the
> top 40 lines from the build logs.
> As can be seen from the logs, the first four builds progress in a nice
> and orderly serial fashion while the fifth and sixth build mix the
> files up a lot and are clearly parallel :
>
> $ head -n 40 build1.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> CC init/do_mounts.o
> LD init/mounts.o
> CC init/initramfs.o
> CC init/calibrate.o
> LD init/built-in.o
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC arch/i386/kernel/process.o
> CC arch/i386/kernel/semaphore.o
> CC arch/i386/kernel/signal.o
> AS arch/i386/kernel/entry.o
> CC arch/i386/kernel/traps.o
> CC arch/i386/kernel/irq.o
> CC arch/i386/kernel/ptrace.o
> CC arch/i386/kernel/time.o
> CC arch/i386/kernel/ioport.o
> CC arch/i386/kernel/ldt.o
> CC arch/i386/kernel/setup.o
> CC arch/i386/kernel/i8259.o
> CC arch/i386/kernel/sys_i386.o
> CC arch/i386/kernel/pci-dma.o
> CC arch/i386/kernel/i386_ksyms.o
> CC arch/i386/kernel/i387.o
>
>
> $ head -n 40 build2.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/do_mounts.o
> CC init/initramfs.o
> CC init/calibrate.o
> CC init/version.o
> LD init/mounts.o
> LD init/built-in.o
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC arch/i386/kernel/process.o
> CC arch/i386/kernel/semaphore.o
> CC arch/i386/kernel/signal.o
> AS arch/i386/kernel/entry.o
> CC arch/i386/kernel/traps.o
> CC arch/i386/kernel/irq.o
> CC arch/i386/kernel/ptrace.o
> CC arch/i386/kernel/time.o
> CC arch/i386/kernel/ioport.o
> CC arch/i386/kernel/ldt.o
> CC arch/i386/kernel/setup.o
> CC arch/i386/kernel/i8259.o
> CC arch/i386/kernel/sys_i386.o
> CC arch/i386/kernel/pci-dma.o
> CC arch/i386/kernel/i386_ksyms.o
> CC arch/i386/kernel/i387.o
>
>
> $ head -n 40 build3.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/do_mounts.o
> CC init/initramfs.o
> CC init/calibrate.o
> CC init/version.o
> LD init/mounts.o
> LD init/built-in.o
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC arch/i386/kernel/process.o
> CC arch/i386/kernel/semaphore.o
> CC arch/i386/kernel/signal.o
> AS arch/i386/kernel/entry.o
> CC arch/i386/kernel/traps.o
> CC arch/i386/kernel/irq.o
> CC arch/i386/kernel/ptrace.o
> CC arch/i386/kernel/time.o
> CC arch/i386/kernel/ioport.o
> CC arch/i386/kernel/ldt.o
> CC arch/i386/kernel/setup.o
> CC arch/i386/kernel/i8259.o
> CC arch/i386/kernel/sys_i386.o
> CC arch/i386/kernel/pci-dma.o
> CC arch/i386/kernel/i386_ksyms.o
> CC arch/i386/kernel/i387.o
>
>
> $ head -n 40 build4.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/do_mounts.o
> CC init/initramfs.o
> CC init/calibrate.o
> CC init/version.o
> LD init/mounts.o
> LD init/built-in.o
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC arch/i386/kernel/process.o
> CC arch/i386/kernel/semaphore.o
> CC arch/i386/kernel/signal.o
> AS arch/i386/kernel/entry.o
> CC arch/i386/kernel/traps.o
> CC arch/i386/kernel/irq.o
> CC arch/i386/kernel/ptrace.o
> CC arch/i386/kernel/time.o
> CC arch/i386/kernel/ioport.o
> CC arch/i386/kernel/ldt.o
> CC arch/i386/kernel/setup.o
> CC arch/i386/kernel/i8259.o
> CC arch/i386/kernel/sys_i386.o
> CC arch/i386/kernel/pci-dma.o
> CC arch/i386/kernel/i386_ksyms.o
> CC arch/i386/kernel/i387.o
>
>
> $ head -n 40 build5.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> CC init/main.o
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/do_mounts.o
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC arch/i386/kernel/process.o
> CC arch/i386/kernel/semaphore.o
> CC arch/i386/kernel/signal.o
> CC init/initramfs.o
> AS arch/i386/kernel/entry.o
> CC arch/i386/kernel/traps.o
> CC arch/i386/mm/init.o
> CC init/calibrate.o
> CC arch/i386/kernel/irq.o
> CC arch/i386/mm/pgtable.o
> CC init/version.o
> CC arch/i386/mm/fault.o
> CC arch/i386/kernel/ptrace.o
> LD init/mounts.o
> CC arch/i386/mm/ioremap.o
> LD init/built-in.o
> CC arch/i386/kernel/time.o
> CC arch/i386/mm/extable.o
> CC arch/i386/mach-default/setup.o
> CC arch/i386/mm/pageattr.o
> CC arch/i386/kernel/ioport.o
>
>
> $ head -n 40 build6.log
> CHK include/linux/version.h
> UPD include/linux/version.h
> SYMLINK include/asm -> include/asm-i386
> SPLIT include/linux/autoconf.h -> include/config/*
> HOSTCC scripts/kallsyms
> HOSTCC scripts/conmakehash
> CC arch/i386/kernel/asm-offsets.s
> GEN include/asm-i386/asm-offsets.h
> CC init/main.o
> CHK include/linux/compile.h
> HOSTCC usr/gen_init_cpio
> CHK usr/initramfs_list
> UPD usr/initramfs_list
> CPIO usr/initramfs_data.cpio
> GZIP usr/initramfs_data.cpio.gz
> AS usr/initramfs_data.o
> LD usr/built-in.o
> CC init/do_mounts.o
> UPD include/linux/compile.h
> CC init/initramfs.o
> CC init/calibrate.o
> CC arch/i386/kernel/process.o
> CC arch/i386/mm/init.o
> CC arch/i386/kernel/semaphore.o
> CC init/version.o
> CC arch/i386/kernel/signal.o
> LD init/mounts.o
> LD init/built-in.o
> CC arch/i386/mm/pgtable.o
> CC arch/i386/mach-default/setup.o
> CC arch/i386/mm/fault.o
> AS arch/i386/kernel/entry.o
> LD arch/i386/mach-default/built-in.o
> CC arch/i386/kernel/traps.o
> LD arch/i386/crypto/built-in.o
> CC arch/i386/mm/ioremap.o
> CC arch/i386/mm/extable.o
> CC arch/i386/mm/pageattr.o
> CC kernel/sched.o
> CC arch/i386/kernel/irq.o
>
>
> Finally here's some information about my system that may be relevant :
>
> $ uname -a
> Linux dragon 2.6.16-rc5-mm1 #1 SMP PREEMPT Tue Feb 28 19:36:09 CET
> 2006 i686 athlon-4 i386 GNU/Linux
>
>
> $ scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux dragon 2.6.16-rc5-mm1 #1 SMP PREEMPT Tue Feb 28 19:36:09 CET
> 2006 i686 athlon-4 i386 GNU/Linux
>
> Gnu C 3.4.5
> Gnu make 3.80
> binutils 2.15.92.0.2
> util-linux 2.12p
> mount 2.12p
> module-init-tools 3.1
> e2fsprogs 1.38
> reiserfsprogs 3.6.19
> quota-tools 3.12.
> PPP 2.4.4b1
> nfs-utils 1.0.7
> Linux C Library 2.3.6
> Dynamic linker (ldd) 2.3.6
> Linux C++ Library 6.0.3
> Procps 3.2.6
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 5.94
> udev 064
> Modules Loaded snd_seq_oss snd_seq_midi_event snd_seq
> snd_pcm_oss snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi
> snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device snd_timer
> snd_page_alloc snd_util_mem snd_hwdep snd agpgart
>
>
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 35
> model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
> stepping : 2
> cpu MHz : 2200.209
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
> lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
> bogomips : 4401.74
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 35
> model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
> stepping : 2
> cpu MHz : 2200.209
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 1
> cpu cores : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
> lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
> bogomips : 4399.54
>
>
> $ cat ./block/sda/queue/scheduler
> noop [anticipatory]
>
>
> $ cat /etc/slackware-version
> Slackware 10.2.0
>
>
> Do we have a scheduler problem?
> An io-scheduler problem?
I'm not really into this, but what happens if you simply start 5 different
kernel-builds in parallel? I think if it makes a difference then this would
mean that there's something wrong with make and you could eliminate the first
two possibilities?!
> Is it "make" that's being difficult?
> Is it something in the kernels Makefile that causes the build to
> behave this way?
> Could it be a bottleneck in my system somewhere?
>
> Anyone got a clue?
>
>
> --
> Jesper Juhl <[email protected]>
> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
> Plain text mails only, please http://www.expita.com/nomime.html
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
