Re: LibPATA code issues / 2.6.15.4

[David Greaves <david@dgreaves.com>]

James Courtier-Dutton wrote:

> I have two desktop linux machines. One is an old Pentium 3 which shows
> the following errors(no libata involved):
> Linux version 2.6.15-rc4 (root@games) (gcc version 4.0.3 20051111
> (prerelease) (Debian 4.0.2-4)
> ) #1 Sat Dec 3 18:47:19 GMT 2005
> Dec 16 22:51:57 games kernel: hdc: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
> Dec 16 22:52:32 games kernel: hdc: dma_intr: error=0x40 {
> UncorrectableError }, LBAsect=53058185, sector=53057951
> Dec 16 22:52:32 games kernel: ide: failed opcode was: unknown
> Dec 16 22:52:32 games kernel: end_request: I/O error, dev hdc, sector
> 53057951
> Dec 16 22:52:32 games kernel: hdc: dma_intr: status=0x51 { DriveReady
> SeekComplete Error }
> Dec 16 22:52:32 games kernel: hdc: dma_intr: error=0x10 {
> SectorIdNotFound }, LBAsect=53058185, sector=53057959
> Dec 16 22:52:32 games kernel: ide: failed opcode was: unknown

This looks like a simple bad disk drive. Notice that the sectors are
quite close.
If you like you can move the drive to a working machine and run a
badblocks on it.
do 'man badblocks' before you start.
Is it SMART capable? What does
  smartctl -a /dev/hdc
show?

ddrescue may be your friend if you need to recover data.

Reply offlist if this is the case.

> The other has the following errors:
> Linux version 2.6.15.1 (root@localhost) (gcc version 3.4.5 (Gentoo
> 3.4.5, ssp-3.4.5-1.0, pi
> e-8.7.9)) #3 SMP PREEMPT Fri Feb 3 23:19:05 GMT 2006
> Feb 10 23:30:07 localhost kernel: ata3: command 0xb0 timeout, stat
> 0xd0 host_stat 0x0
> Feb 10 23:30:07 localhost kernel: ata3: translated ATA stat/err
> 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> Feb 10 23:30:07 localhost kernel: ata3: status=0xd0 { Busy }
> Feb 10 23:30:07 localhost kernel: ATA: abnormal status 0xD0 on port
> 0xF880E087
> Feb 10 23:30:07 localhost last message repeated 3 times
> Feb 10 23:30:10 localhost kernel: ata3: PIO error
> Feb 10 23:30:10 localhost kernel: ata3: status=0x50 { DriveReady
> SeekComplete }
> Feb 11 10:18:10 localhost kernel: ata2: command 0xb0 timeout, stat
> 0xd0 host_stat 0x0
> Feb 11 10:18:10 localhost kernel: ata2: translated ATA stat/err
> 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> Feb 11 10:18:10 localhost kernel: ata2: status=0xd0 { Busy }
> Feb 11 10:18:10 localhost kernel: ATA: abnormal status 0xD0 on port 0x177
> Feb 11 10:18:10 localhost last message repeated 3 times

Have you got smartd running?
I get a similar problem running some smartcl commands (-s on and -o on)
I suspect this is a libata ata passthru problem - but I'm *guessing* :)

check the last messages in dmesg then run
smartctl -data -s on /dev/sd...
smartctl -data -o on /dev/sd...
See if there are new messages in dmesg

David

-- 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/