Hi, while searching for more information on this bug, I found this in my /var/log/syslog. Maybe it has something to do with the problems I have. Feb 9 18:41:37 amd64 udevd-event[14337]: wait_for_sysfs: waiting for '/sys/devices/pci0000:00/0000:00:0e.0/0000:02:0a.0/i2c-2/2-0047/bus' failed lspci matches on this: 02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01) I let the old mail text appended (tell me please, if to throw it away in possible future replies) Regards Christian Mauro Carvalho Chehab schrieb: > Christian, > > May you try this patch? > > Cheers, > Mauro. > > Em Qui, 2006-02-09 às 15:23 -0800, Andrew Morton escreveu: >> Begin forwarded message: >> >> Date: Thu, 09 Feb 2006 12:00:01 +0100 >> From: Christian Roessner <[email protected]> >> To: [email protected] >> Subject: Bug in saa7134/tuner (Pinnacle MediaCenter 300i) >> >> >> Hello, >> >> [1.] One line summary of the problem: >> saa7134 and tuner modules / Problem with Pinnacle MediaCenter 300i >> >> >> [2.] Full description of the problem/report: >> After starting the computer, I do a modprobe saa7134. >> >> These are the options from /etc/modprobe.conf: >> options tuner no_autodetect=33 >> options saa7134 card=50 tuner=33 >> >> (Autodetection for card= works, but I set it anyways. Tuner >> autodetection seems to be broken) >> >> dmesg output: >> >> Linux video capture interface: v1.00 >> saa7130/34: v4l2 driver version 0.2.14 loaded >> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 >> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level, >> low) -> IRQ 17 >> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio: >> 0xfeaff800 >> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL >> [card=50,insmod option] >> saa7134[0]: board init: gpio is c806000 >> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 >> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff >> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff >> tuner 2-0043: chip found @ 0x86 (saa7134[0]) >> tuner 2-0043: microtune: companycode=e0e0 part=e0 rev=e0 >> tuner 2-0043: microtune unknown found, not (yet?) supported, sorry :-/ >> saa7134[0]/irq[10,4297703459]: r=0x20 s=0x00 PE >> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit >> saa7134[0]: registered device video0 [v4l2] >> saa7134[0]: registered device vbi0 >> >> As you can see, the tuner does not work. I do a rmmod tuner and a rmmod >> saa7134 and do a modprobe saa7134 again: >> >> dmesg output: >> >> saa7130/34: v4l2 driver version 0.2.14 loaded >> ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level, >> low) -> IRQ 17 >> saa7134[0]: found at 0000:02:0a.0, rev: 1, irq: 17, latency: 64, mmio: >> 0xfeaff800 >> saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL >> [card=50,insmod option] >> saa7134[0]: board init: gpio is c806000 >> tda9887 2-0043: chip found @ 0x86 (saa7134[0]) >> saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 >> saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff >> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 27 36 95 ff ff ff ff ff ff ff ff >> saa7134[0]: i2c eeprom 70: 00 30 8d 18 cc d8 ff ff f4 b8 ff ff ff ff ff ff >> tuner 2-0060: chip found @ 0xc0 (saa7134[0]) >> tuner 2-0060: microtune: companycode=3cbf part=42 rev=83 >> tuner 2-0060: microtune MT2050 found, OK >> saa7134[0]/irq[10,4298210983]: r=0x20 s=0x00 PE >> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit >> saa7134[0]: registered device video0 [v4l2] >> saa7134[0]: registered device vbi0 >> >> After that the card is working. >> >> So something goes wrong with detection. One funny thing: If repeating >> steps from above, the rev= line changes: See: >> >> tuner 2-0060: microtune: companycode=3cbf part=42 rev=88 >> >> >> [3.] Keywords (i.e., modules, networking, kernel): >> >> saa7134; Multimedia >> >> >> [4.] Kernel version (from /proc/version): >> >> Linux version 2.6.15-suspend2-r5 (root@amd64) (gcc-Version 4.0.2 (Gentoo >> 4.0.2-r3, pie-8.7.8)) #5 PREEMPT Wed Feb 8 17:59:21 CET 2006 >> >> Same with vanilla-sources (2.6.15.3) and 2.6.16_rc2-git >> >> >> [5.] Most recent kernel version which did not have the bug: >> >> I am not sure, but I think it was version 2.6.14.x >> >> >> [6.] Output of Oops.. message (if applicable) with symbolic information >> resolved (see Documentation/oops-tracing.txt) >> >> No Oopses >> >> >> [7.] A small shell script or example program which triggers the >> problem (if possible) >> >> Only the modprobe/rmmod stuff from above >> >> >> [8.] Environment >> >> Gentoo Base System version 1.12.0_pre15 >> Portage 2.1_pre4-r1 (default-linux/amd64/2005.1, gcc-4.0.2, >> glibc-2.3.6-r2, 2.6.15-suspend2-r5 x86_64) >> ================================================================= >> System uname: 2.6.15-suspend2-r5 x86_64 AMD Athlon(tm) 64 Processor 3200+ >> ccache version 2.4 [enabled] >> dev-lang/python: 2.4.2-r1 >> sys-apps/sandbox: 1.2.17 >> sys-devel/autoconf: 2.13, 2.59-r7 >> sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 >> sys-devel/binutils: 2.16.1-r1 >> sys-devel/libtool: 1.5.22 >> virtual/os-headers: 2.6.11-r3 >> ACCEPT_KEYWORDS="amd64 ~amd64" >> ACCEPT_LICENSE="" >> ALSA_CARDS="intel8x0 emu10k1" >> ANT_HOME="/usr/share/ant-core" >> ARCH="amd64" >> AUTOCLEAN="yes" >> BASH_ENV="/etc/spork/is/not/valid/profile.env" >> CBUILD="x86_64-pc-linux-gnu" >> CCACHE_SIZE="5G" >> CDEFINE_amd64="__x86_64__" >> CDEFINE_x86="__i386__" >> CFLAGS="-O2 -march=athlon64 -pipe" >> CFLAGS_x86="-m32 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib" >> CHOST="x86_64-pc-linux-gnu" >> CHOST_amd64="x86_64-pc-linux-gnu" >> CHOST_x86="i686-pc-linux-gnu" >> CLASSPATH="." >> CLEAN_DELAY="5" >> CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config >> /usr/share/X11/xkb /usr/share/config /var/bind /var/qmail/control" >> CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo >> /etc/texmf/web2c /etc/env.d" >> CVS_RSH="ssh" >> CXXFLAGS="-O2 -march=athlon64 -pipe" >> DCCC_PATH="/usr/lib/distcc/bin" >> DEFAULT_ABI="amd64" >> DISPLAY=":0.0" >> DISTCC_LOG="" >> DISTCC_VERBOSE="0" >> DISTDIR="/usr/portage/distfiles" >> EDITOR="/usr/bin/vim" >> ELIBC="glibc" >> EMERGE_WARNING_DELAY="10" >> FEATURES="autoconfig ccache digest distlocks prelink sandbox sfperms strict" >> FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --no-check-certificate >> ${URI} -P ${DISTDIR}" >> FLTK_DOCDIR="/usr/share/doc/fltk-1.1.7/html" >> FRITZCAPI_CARDS="fcusb2" >> GCC_SPECS="" >> GDK_USE_XFT="1" >> GDM_LANG="de_DE.utf8" >> GENTOO_MIRRORS="http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ >> ftp://gentoo.inode.at/source/ ftp://ftp.easynet.nl/mirror/gentoo/ >> ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo"; >> GUILE_LOAD_PATH="/usr/share/guile/1.6" >> G_BROKEN_FILENAMES="1" >> HISTCONTROL="ignoredups:erasedups" >> HOME="/root" >> HOSTNAME="amd64" >> INFOPATH="/usr/share/info:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/info:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/info" >> INPUT_DEVICES="evdev keyboard mouse " >> JAVAC="/opt/blackdown-jdk-1.4.2.03/bin/javac" >> JAVA_HOME="/opt/blackdown-jdk-1.4.2.03" >> JDK_HOME="/opt/blackdown-jdk-1.4.2.03" >> KERNEL="linux" >> LADSPA_PATH="/usr/lib64/ladspa" >> LANG="de_DE.utf8" >> LC_ALL="de_DE.utf8" >> LDFLAGS_x86="-m elf_i386 -L/emul/linux/x86/lib -L/emul/linux/x86/usr/lib" >> LESS="-R -M --shift 5" >> LESSCHARSET="utf-8" >> LESSOPEN="|lesspipe.sh %s" >> LIBDIR_amd64="lib64" >> LIBDIR_x86="lib32" >> LINGUAS="de" >> LOGNAME="root" >> LS_COLORS="no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.qt=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.pdf=00;32:*.ps=00;32:*.txt=00;32:*.patch=00;32:*.diff=00;32:*.log=00;32:*.tex=00;32:*.doc=00;32:*.flac=01;35:*.mp3=01;3 5:* >> .mpc=00;36:*.ogg=00;36:*.wav=00;36:*.mid=00;36:*.midi=00;36:*.au=00;36:*.flac=00;36:*.aac=00;36:" >> MAKEOPTS="-j3" >> MANPATH="/usr/local/share/man:/usr/share/man:/usr/share/binutils-data/x86_64-pc-linux-gnu/2.16.1/man:/usr/share/gcc-data/x86_64-pc-linux-gnu/4.0.2/man::/opt/blackdown-jdk-1.4.2.03/man" >> MULTILIB_ABIS="x86 amd64" >> MULTILIB_STRICT_DENY="64-bit.*shared object" >> MULTILIB_STRICT_DIRS="/lib /usr/lib /usr/kde/*/lib /usr/qt/*/lib >> /usr/X11R6/lib" >> MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|eclipse-3|debug|portage)" >> OPENGL_PROFILE="nvidia" >> PAGER="/usr/bin/less" >> PATH="/root/bin:/usr/lib/ccache/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.0.2:/opt/Acrobat7:/opt/blackdown-jdk-1.4.2.03/bin:/opt/blackdown-jdk-1.4.2.03/jre/bin" >> PKGDIR="/usr/portage/packages" >> PORTAGE_ARCHLIST="ppc s390 amd64 ppc64 m68k arm sparc sh mips ia64 alpha >> ppc-macos hppa x86" >> PORTAGE_BINHOST_CHUNKSIZE="3000" >> PORTAGE_CALLER="emerge" >> PORTAGE_ELOG_CLASSES="info warn error log" >> PORTAGE_ELOG_MAILURI="root@localhost localhost" >> PORTAGE_ELOG_SYSTEM="save mail" >> PORTAGE_GID="250" >> PORTAGE_MASTER_PID="15131" >> PORTAGE_TMPDIR="/var/tmp" >> PORTAGE_TMPFS="/dev/shm" >> PORTDIR="/usr/portage" >> PORTDIR_OVERLAY="/usr/local/overlays/portage" >> PRELINK_PATH="" >> PRELINK_PATH_MASK="/usr/lib/gstreamer-0.8:/lib/modules:/usr/lib64/locale:/usr/lib64/wine:/usr/lib64/valgrind:*.la:*.png:*.py:*.pl:*.pm:*.sh:*.xml:*.xslt:*.a:*.js:/usr/lib/klibc" >> PWD="/root" >> PYTHONDOCS="/usr/share/doc/python-docs-2.4.2/html" >> PYTHONPATH="/usr/lib/portage/pym" >> QTDIR="/emul/linux/x86/usr/qt/2:/emul/linux/x86/usr/qt/3" >> RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp >> --no-check-certificate ${URI} -P ${DISTDIR}" >> RPMDIR="/usr/portage/rpm" >> RSYNC_RETRIES="3" >> RSYNC_TIMEOUT="180" >> SANE_CONFIG_DIR="/etc/sane.d" >> SHELL="/bin/bash" >> SHLVL="1" >> SYMLINK_LIB="yes" >> SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" >> TERM="xterm" >> USE="amd64 X X509 a52 aac aalib acl acpi acpi4linux activefilter alsa >> apache2 avi bash-completion bcmath berkdb bigger-fonts bitmap-fonts >> bluetooth browserplugin bzip2 bzlib cairo caps cddb cdparanoia cdr >> chroot client codecs crypt cscope css ctype cups dbm dbus dga dhcp >> directfb dlloader doc dri dts dvd dvdr dvdread dxr3 eds emboss encode >> esd exif expat extensions faac faad fame fax faxonly fbcon fbsplash >> ffmpeg firefox flac font-server foomaticdb freetype fuse gd gdbm gif >> gimp gimpprint glitz glut gmp gnome gphoto2 gpm gstreamer gtk gtk2 >> gtkhtml guile hal hbci howl icq icu idn imagemagick imap imlib ipv6 >> javascript jbig jpeg jpeg2k lcd lcms ldap libcaca libclamav lirc >> lm_sensors logrotate lzo lzw lzw-tiff mad maildir mailwrapper mbox mcal >> md5sum mikmod mime mjpeg mng >> motif mp3 mpeg mpeg4 mppe-mppc mysql nautilus ncurses network nls >> no-old-linux nptl nptlonly nsplugin ntfs nvidia ogg oggvorbis opengl oss >> pam password pcntl pdflib perl php pic png pnp posix postgres ppds >> python quicktime readline rtc ruby samba scanner sdl session sftplogging >> slang snmp sockets sox speex spell sqlite ssl subversion svg symlink >> tcltk tcpd tetex theora threads tiff tokenizer truetype truetype-fonts >> type1-fonts udev unicode usb userlocales vcd vim-with-x vorbis wma wmf >> wxwindows xine xml2 xmms xpm xprint xrandr xscreensaver xsl xv xvid zlib >> elibc_glibc fritzcapi_cards_fcusb2 input_devices_evdev >> input_devices_keyboard input_devices_mouse kernel_linux linguas_de >> userland_GNU video_cards_apm video_cards_v4l video_cards_nvidia >> video_cards_nv" >> USER="root" >> USERLAND="GNU" >> USE_EXPAND="DVB_CARDS ELIBC FCDSL_CARDS FRITZCAPI_CARDS INPUT_DEVICES >> KERNEL LINGUAS USERLAND VIDEO_CARDS" >> USE_EXPAND_HIDDEN="" >> USE_ORDER="env:pkg:conf:defaults" >> VIDEO_CARDS="apm v4l nvidia nv" >> XARGS="xargs -r" >> XAUTHORITY="/root/.xauthVRSTJs" >> _="/usr/bin/emerge" >> >> >> [8.1.] Software (add the output of the ver_linux script here) >> >> If some fields are empty or look unusual you may have an old version. >> Compare to the current minimal requirements in Documentation/Changes. >> >> Linux amd64 2.6.15-suspend2-r5 #5 PREEMPT Wed Feb 8 17:59:21 CET 2006 >> x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux >> >> Gnu C 4.0.2 >> Gnu make 3.80 >> binutils 2.16.1 >> util-linux 2.12r >> mount 2.12r >> module-init-tools 3.2.2 >> e2fsprogs 1.38 >> reiserfsprogs line >> reiser4progs line >> PPP 2.4.3 >> nfs-utils 1.0.7 >> Linux C Library 2.3.6 >> Dynamic linker (ldd) 2.3.6 >> Procps 3.2.6 >> Net-tools 1.60 >> Kbd 1.12 >> Sh-utils 5.93 >> udev 084 >> Modules Loaded tuner saa7134 tda9887 video_buf v4l2_common >> v4l1_compat ir_kbd_i2c ir_common videodev snd_seq_midi snd_emu10k1_synth >> snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_oss >> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss b1pci b1dma b1 capi >> capifs kernelcapi snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus >> snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep >> snd soundcore 8250_pnp 8250 serial_core forcedeth 8139too mii nvidia eth1394 >> >> >> [8.2.] Processor information (from /proc/cpuinfo): >> >> processor : 0 >> vendor_id : AuthenticAMD >> cpu family : 15 >> model : 4 >> model name : AMD Athlon(tm) 64 Processor 3200+ >> stepping : 8 >> cpu MHz : 803.924 >> cache size : 1024 KB >> fpu : yes >> fpu_exception : yes >> cpuid level : 1 >> wp : yes >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >> mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm >> 3dnowext 3dnow >> bogomips : 1608.88 >> TLB size : 1024 4K pages >> clflush size : 64 >> cache_alignment : 64 >> address sizes : 40 bits physical, 48 bits virtual >> power management: ts fid vid ttp >> >> >> [8.3.] Module information (from /proc/modules): >> >> tuner 39396 0 - Live 0xffffffff885e0000 >> saa7134 114216 0 - Live 0xffffffff885c3000 >> tda9887 14800 0 - Live 0xffffffff885eb000 >> video_buf 18244 1 saa7134, Live 0xffffffff885bd000 >> v4l2_common 6400 1 saa7134, Live 0xffffffff885ba000 >> v4l1_compat 11140 1 saa7134, Live 0xffffffff885b6000 >> ir_kbd_i2c 7436 1 saa7134, Live 0xffffffff885b3000 >> ir_common 8708 2 saa7134,ir_kbd_i2c, Live 0xffffffff885af000 >> videodev 9280 1 saa7134, Live 0xffffffff885ab000 >> snd_seq_midi 6976 0 - Live 0xffffffff885a8000 >> snd_emu10k1_synth 6656 0 - Live 0xffffffff885a5000 >> snd_emux_synth 33920 1 snd_emu10k1_synth, Live 0xffffffff8859b000 >> snd_seq_virmidi 6144 1 snd_emux_synth, Live 0xffffffff88598000 >> snd_seq_midi_emul 5696 1 snd_emux_synth, Live 0xffffffff88595000 >> snd_seq_oss 30948 0 - Live 0xffffffff8858c000 >> snd_seq_midi_event 6656 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live >> 0xffffffff88589000 >> snd_seq 49240 8 >> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event, >> Live 0xffffffff8857b000 >> snd_pcm_oss 39008 0 - Live 0xffffffff88570000 >> snd_mixer_oss 15232 1 snd_pcm_oss, Live 0xffffffff8856b000 >> b1pci 7360 1 - Live 0xffffffff88566000 >> b1dma 13636 1 b1pci, Live 0xffffffff88561000 >> b1 22784 2 b1pci,b1dma, Live 0xffffffff8855a000 >> capi 14640 4 - Live 0xffffffff88555000 >> capifs 4752 2 capi, Live 0xffffffff88552000 >> kernelcapi 46112 4 b1pci,b1dma,b1,capi, Live 0xffffffff88545000 >> snd_emu10k1 112196 2 snd_emu10k1_synth, Live 0xffffffff88528000 >> snd_rawmidi 21920 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live >> 0xffffffff88521000 >> snd_ac97_codec 98428 1 snd_emu10k1, Live 0xffffffff88507000 >> snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xffffffff88505000 >> snd_pcm 81932 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec, Live >> 0xffffffff884ef000 >> snd_seq_device 7824 7 >> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi, >> Live 0xffffffff884ec000 >> snd_timer 21256 3 snd_seq,snd_emu10k1,snd_pcm, Live 0xffffffff884e5000 >> snd_page_alloc 8400 2 snd_emu10k1,snd_pcm, Live 0xffffffff884e1000 >> snd_util_mem 3840 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884df000 >> snd_hwdep 8392 2 snd_emux_synth,snd_emu10k1, Live 0xffffffff884db000 >> snd 53184 15 >> snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep, >> Live 0xffffffff884cd000 >> soundcore 8480 1 snd, Live 0xffffffff884c9000 >> 8250_pnp 10496 0 - Live 0xffffffff884c5000 >> 8250 20992 1 8250_pnp, Live 0xffffffff884be000 >> serial_core 18176 1 8250, Live 0xffffffff884b8000 >> forcedeth 21956 0 - Live 0xffffffff884b1000 >> 8139too 22976 0 - Live 0xffffffff884aa000 >> mii 4928 1 8139too, Live 0xffffffff884a7000 >> nvidia 4847316 12 - Live 0xffffffff88006000 >> eth1394 17936 0 - Live 0xffffffff88000000 >> >> >> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) >> >> 0000-001f : dma1 >> 0020-0021 : pic1 >> 0040-0043 : timer0 >> 0050-0053 : timer1 >> 0060-006f : keyboard >> 0070-0077 : rtc >> 0080-008f : dma page reg >> 00a0-00a1 : pic2 >> 00c0-00df : dma2 >> 00f0-00ff : fpu >> 0170-0177 : ide1 >> 01f0-01f7 : ide0 >> 02f8-02ff : serial >> 0376-0376 : ide1 >> 0378-037a : parport0 >> 03c0-03df : vesafb >> 03f6-03f6 : ide0 >> 03f8-03ff : serial >> 0480-0487 : pnp 00:08 >> 0810-0815 : ACPI CPU throttle >> 0970-0977 : 0000:00:0a.0 >> 0970-0977 : sata_nv >> 09f0-09f7 : 0000:00:0a.0 >> 09f0-09f7 : sata_nv >> 0b70-0b73 : 0000:00:0a.0 >> 0b70-0b73 : sata_nv >> 0bf0-0bf3 : 0000:00:0a.0 >> 0bf0-0bf3 : sata_nv >> 0cf8-0cff : PCI conf1 >> 0d00-0d07 : pnp 00:08 >> 0d00-0d07 : it87-isa >> 4000-4003 : PM1a_EVT_BLK >> 4004-4005 : PM1a_CNT_BLK >> 4008-400b : PM_TMR >> 401c-401c : PM2_CNT_BLK >> 4020-4027 : GPE0_BLK >> 5000-503f : 0000:00:01.1 >> 5000-5007 : nForce2_smbus >> 5040-507f : 0000:00:01.1 >> 5040-5047 : nForce2_smbus >> 5080-509f : 0000:00:01.1 >> b000-cfff : PCI Bus #02 >> b800-b87f : 0000:02:0b.0 >> bc00-bc1f : 0000:02:09.0 >> bc00-bc1e : b1pci-bc00 >> c000-c03f : 0000:02:09.0 >> c400-c41f : 0000:02:08.0 >> c400-c41f : EMU10K1 >> c800-c8ff : 0000:02:07.0 >> c800-c8ff : 8139too >> cc00-cc07 : 0000:02:08.1 >> d000-d07f : 0000:00:0a.0 >> d000-d07f : sata_nv >> d400-d40f : 0000:00:0a.0 >> d400-d40f : sata_nv >> ec00-ec07 : 0000:00:05.0 >> ec00-ec07 : forcedeth >> ffa0-ffaf : 0000:00:08.0 >> ffa0-ffa7 : ide0 >> ffa8-ffaf : ide1 >> >> 00000000-0009fbff : System RAM >> 0009fc00-0009ffff : reserved >> 000a0000-000bffff : Video RAM area >> 000c0000-000c7fff : Video ROM >> 000f0000-000fffff : System ROM >> 00100000-3ffbffff : System RAM >> 00100000-003ceeaa : Kernel code >> 003ceeab-0051962f : Kernel data >> 3ffc0000-3ffcffff : ACPI Tables >> 3ffd0000-3fffffff : ACPI Non-volatile Storage >> 9a800000-ba7fffff : PCI Bus #01 >> a0000000-afffffff : 0000:01:00.0 >> a0000000-afffffff : vesafb >> c0000000-dfffffff : 0000:00:00.0 >> fa900000-fe9fffff : PCI Bus #01 >> fc000000-fcffffff : 0000:01:00.0 >> fd000000-fdffffff : 0000:01:00.0 >> fd000000-fdffffff : nvidia >> fe9e0000-fe9fffff : 0000:01:00.0 >> fea00000-feafffff : PCI Bus #02 >> feaff000-feaff7ff : 0000:02:0b.0 >> feaff000-feaff7ff : ohci1394 >> feaff800-feaffbff : 0000:02:0a.0 >> feaff800-feaffbff : saa7134[0] >> feaffc00-feaffcff : 0000:02:07.0 >> feaffc00-feaffcff : 8139too >> febfc000-febfcfff : 0000:00:05.0 >> febfc000-febfcfff : forcedeth >> febfd000-febfdfff : 0000:00:02.0 >> febfd000-febfdfff : ohci_hcd >> febfe000-febfefff : 0000:00:02.1 >> febfe000-febfefff : ohci_hcd >> febffc00-febffcff : 0000:00:02.2 >> febffc00-febffcff : ehci_hcd >> fec00000-fec00fff : reserved >> fee00000-fee00fff : reserved >> ff7c0000-ffffffff : reserved >> >> >> [8.5.] PCI information ('lspci -vvv' as root) >> >> 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 >> Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M] >> Capabilities: [44] HyperTransport: Slave or Primary Interface >> Command: BaseUnitID=0 UnitCnt=14 MastHost- DefDir- DUL- >> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- >> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- >> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- >> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- >> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ >> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- >> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- >> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- >> Revision ID: 1.03 >> Link Frequency 0: 800MHz >> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- >> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ >> 500MHz+ 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- >> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- >> Link Frequency 1: 200MHz >> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- >> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- >> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- >> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- >> CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- >> Prefetchable memory behind bridge Upper: 00-00 >> Bus Number: 00 >> Capabilities: [c0] AGP version 3.0 >> Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- >> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 >> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ >> Rate=x8 >> >> 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 >> >> 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management >> (rev a1) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Interrupt: pin A routed to IRQ 0 >> Region 0: I/O ports at 5080 [size=32] >> Region 4: I/O ports at 5000 [size=64] >> Region 5: I/O ports at 5040 [size=64] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) >> (prog-if 10 [OHCI]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (750ns min, 250ns max) >> Interrupt: pin A routed to IRQ 19 >> Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) >> (prog-if 10 [OHCI]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (750ns min, 250ns max) >> Interrupt: pin B routed to IRQ 16 >> Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 >> Controller (rev a2) (prog-if 20 [EHCI]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (750ns min, 250ns max) >> Interrupt: pin C routed to IRQ 18 >> Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256] >> Capabilities: [44] Debug port >> Capabilities: [80] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2) >> Subsystem: ASUSTeK Computer Inc. Unknown device 80a7 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (250ns min, 5000ns max) >> Interrupt: pin A routed to IRQ 18 >> Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K] >> Region 1: I/O ports at ec00 [size=8] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0+,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller >> (v2.5) (rev a2) (prog-if 8a [Master SecP PriP]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (750ns min, 250ns max) >> Region 4: I/O ports at ffa0 [size=16] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller >> (v2.5) (rev a2) (prog-if 85 [Master SecO PriO]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 813f >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 0 (750ns min, 250ns max) >> Interrupt: pin A routed to IRQ 16 >> Region 0: I/O ports at 09f0 [size=8] >> Region 1: I/O ports at 0bf0 [size=4] >> Region 2: I/O ports at 0970 [size=8] >> Region 3: I/O ports at 0b70 [size=4] >> Region 4: I/O ports at d400 [size=16] >> Region 5: I/O ports at d000 [size=128] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI >> Bridge (rev a2) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 16 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 >> I/O behind bridge: 0000f000-00000fff >> Memory behind bridge: fa900000-fe9fffff >> Prefetchable memory behind bridge: 9a800000-ba7fffff >> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort+ <SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >> >> 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge >> (rev a2) (prog-if 00 [Normal decode]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR+ <PERR- >> Latency: 0 >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 >> I/O behind bridge: 0000b000-0000cfff >> Memory behind bridge: fea00000-feafffff >> Prefetchable memory behind bridge: fff00000-000fffff >> Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- >> <TAbort- <MAbort+ <SERR- <PERR+ >> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- >> >> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> HyperTransport Technology Configuration >> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Capabilities: [80] HyperTransport: Host or Secondary Interface >> !!! Possibly incomplete decoding >> Command: WarmRst+ DblEnd- >> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- >> <CRCErr=0 >> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit >> Revision ID: 1.02 >> >> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> Address Map >> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> >> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> DRAM Controller >> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> >> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> Miscellaneous Control >> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> >> 01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 >> GT] (rev a1) (prog-if 00 [VGA]) >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 248 (1250ns min, 250ns max) >> Interrupt: pin A routed to IRQ 20 >> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at a0000000 (32-bit, prefetchable) [size=256M] >> Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] >> [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K] >> Capabilities: [60] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [44] AGP version 3.0 >> Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- >> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 >> Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- >> FW+ Rate=x8 >> >> 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL-8139/8139C/8139C+ (rev 10) >> Subsystem: Realtek Semiconductor Co., Ltd. RT8139 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 (8000ns min, 16000ns max) >> Interrupt: pin A routed to IRQ 17 >> Region 0: I/O ports at c800 [size=256] >> Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0-,D1+,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 02:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) >> Subsystem: Creative Labs SBLive! 5.1 Model SB0100 >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 (500ns min, 5000ns max) >> Interrupt: pin A routed to IRQ 21 >> Region 0: I/O ports at c400 [size=32] >> Capabilities: [dc] Power Management version 1 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 02:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port >> (rev 07) >> Subsystem: Creative Labs Gameport Joystick >> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 >> Region 0: I/O ports at cc00 [size=8] >> Capabilities: [dc] Power Management version 1 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> 02:09.0 Network controller: AVM Audiovisuelles MKTG & Computer System >> GmbH B1 ISDN >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 >> Interrupt: pin A routed to IRQ 22 >> Region 0: I/O ports at c000 [size=64] >> Region 1: I/O ports at bc00 [size=32] >> >> 02:0a.0 Multimedia controller: Philips Semiconductors SAA7134 Video >> Broadcast Decoder (rev 01) >> Subsystem: Pinnacle Systems Inc. Pinnacle PCTV 300i DVB-T + PAL >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR+ >> Latency: 64 (62000ns min, 62000ns max) >> Interrupt: pin A routed to IRQ 17 >> Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K] >> Capabilities: [40] Power Management version 1 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=1 PME- >> >> 02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host >> Controller (rev 80) (prog-if 10 [OHCI]) >> Subsystem: ASUSTeK Computer Inc. Unknown device 808a >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- >> ParErr- Stepping- SERR+ FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR+ >> Latency: 64 (8000ns max), Cache Line Size 08 >> Interrupt: pin A routed to IRQ 17 >> Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K] >> Region 1: I/O ports at b800 [size=128] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA >> PME(D0-,D1-,D2+,D3hot+,D3cold+) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> >> [8.6.] SCSI information (from /proc/scsi/scsi) >> >> Attached devices: >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 >> Type: Direct-Access ANSI SCSI revision: 05 >> >> >> [8.7.] Other information that might be relevant to the problem >> (please look in /proc and include all information that you >> think to be relevant): >> >> Nothing more ;-) >> >> >> [X.] Other notes, patches, fixes, workarounds: >> >> The rmmod/modprobe fun from above is a very, very bad workaround. >> >> Thanks in advance >> >> Christian >> >> > Cheers, > Mauro. > > > ------------------------------------------------------------------------ > > --- saa7134-cards.c.orig 2006-02-08 17:58:46.000000000 +0100 > +++ saa7134-cards.c 2006-02-08 18:39:04.000000000 +0100 > @@ -979,7 +979,7 @@ > .radio_type = UNSET, > .tuner_addr = ADDR_UNSET, > .radio_addr = ADDR_UNSET, > - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE, > + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, > .inputs = {{ > .name = name_tv, > .vmux = 3, > @@ -1668,7 +1668,7 @@ > .radio_type = UNSET, > .tuner_addr = ADDR_UNSET, > .radio_addr = ADDR_UNSET, > - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE, > + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, > .mpeg = SAA7134_MPEG_DVB, > .inputs = {{ > .name = name_tv, -- Tel.: 0641-2097252, Mobil: 0171-3611230 PGP: http://www.roessner-net.com/0x6B929997.asc
Attachment:
signature.asc
Description: OpenPGP digital signature
- Prev by Date: Re: CD writing in future Linux (stirring up a hornets' nest)
- Next by Date: Re: CD writing in future Linux (stirring up a hornets' nest)
- Previous by thread: Bug in saa7134/tuner (Pinnacle MediaCenter 300i)
- Next by thread: For those who demand only the best
- Index(es):
 |