Hi!
> actual p2p bridge, and what I try to do here is:
> 1) find the device that _DCK is defined under
> 2) if this is a bridged device, we are done (i.e. is has _ADR and is
> ejectable)
> 3) if not, then walk the namespace looking for _EJD. If you find one,
> see if the dependency is on the dock device. The dock bridge should be
> dependent on the dock device.
>
> - when you find something that is dependent on the dock device,
> see if it has an _ADR and a _PRT entry. If so, then it is the
> p2p dock bridge.
>
> So, this is likely a wrong assumption, so I will be thinking some more
> about how to tell which acpi device is the dock bridge. But meanwhile,
> this patch could be tested/reviewed to see if it gets us a step further
> in the right direction.
Oopsen seems to be called because add_p2p_bridge is never called. I
think it should be called for this device:
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
--- clean-mm//drivers/pci/hotplug/acpiphp_glue.c 2006-01-21 11:38:51.000000000 +0100
+++ linux-mm/drivers/pci/hotplug/acpiphp_glue.c 2006-01-21 12:53:28.000000000 +0100
@@ -454,16 +457,22 @@
return AE_OK;
}
+ printk("ADR ok\n");
+
device = (tmp >> 16) & 0xffff;
function = tmp & 0xffff;
dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
+ printk("device, function = %lx\n", tmp);
+
if (!dev || !dev->subordinate)
goto out;
+ printk("detect slots\n");
+
/* check if this bridge has ejectable slots */
- if (detect_ejectable_slots(handle) > 0) {
+ if ((tmp == 0x1e0000) || (detect_ejectable_slots(handle) > 0)) {
dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
add_p2p_bridge(handle, dev);
}
...but then bridge->slots is still empty. I tried forcing
is_ejectable(), but then I get:
Jan 21 13:09:52 amd kernel: acpiphp: ACPI Hot Plug PCI Controller
Driver version: 0.5
Jan 21 13:09:53 amd kernel: add_bridge
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1f0000
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 10000
Jan 21 13:09:53 amd kernel: detect slots
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1e0000
Jan 21 13:09:53 amd kernel: detect slots
Jan 21 13:09:53 amd kernel: acpiphp_glue: found PCI-to-PCI bridge at
PCI 0000:00:1e.0
Jan 21 13:09:53 amd kernel: add_p2p_bridge
Jan 21 13:09:53 amd kernel: acpiphp_glue: _HPP evaluation failed
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1f0001
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1d0000
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1d0001
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1d0002
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1d0007
Jan 21 13:09:53 amd kernel: find_p2p_bridge
Jan 21 13:09:53 amd kernel: ADR ok
Jan 21 13:09:53 amd kernel: device, function = 1f0006
Jan 21 13:09:53 amd kernel: acpiphp_glue: Bus 0000:02 has 0 slots
Jan 21 13:09:53 amd kernel: acpiphp_glue: Total 0 slots
Jan 21 13:10:05 amd pam_limits[1345]: wrong limit value 'unlimited'
Pavel
--
Thanks, Sharp!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
