Hi all,
I have a MSI Megabook S270 with AMD Turion MT-30 and the interrupt routing
never worked quite right. I'll describe the problems with 2.6.15, since I
reinstalled the system recently and do not have older kernels to quote logs
for those.
First I have to boot with e.g. noapic, otherwise the system time runs twice as
fast but with and without noapic. pci=routeirq, pci=assign-busses or irqpoll
the interrupt assigned to the USB controllers gets disabled and thus renders
USB unfunctional.
Attached are dmesg and /proc/interrupts of 2.6.15 once vanilla and once with
noapic. Just drop a note if more information, option or patch to test is
welcome:
Bootdata ok (command line is root=/dev/hda3 ro)
Linux version 2.6.15-dist (root@localhost) (gcc version 4.0.2) #1 Sun Jan 15
16:04:52 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001df40000 (usable)
BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data)
BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS)
BIOS-e820: 000000001e000000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 MSI ) @ 0x00000000000f8340
ACPI: RSDT (v001 MSI 1013 0x06272005 MSFT 0x00000097) @
0x000000001df40000
ACPI: FADT (v002 MSI 1013 0x06272005 MSFT 0x00000097) @
0x000000001df40200
ACPI: MADT (v001 MSI OEMAPIC 0x06272005 MSFT 0x00000097) @
0x000000001df40300
ACPI: WDRT (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @
0x000000001df40360
ACPI: MCFG (v001 MSI OEMMCFG 0x06272005 MSFT 0x00000097) @
0x000000001df403b0
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @
0x000000001df43560
ACPI: OEMB (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @
0x000000001df50040
ACPI: DSDT (v001 MSI 1013 0x06272005 INTL 0x02002026) @
0x0000000000000000
No mptable found.
On node 0 totalpages: 120168
DMA zone: 3197 pages, LIFO batch:0
DMA32 zone: 116971 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Checking aperture...
CPU 0: aperture @ e062000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 1591.890 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 475600k/490752k available (1709k kernel code, 14464k reserved, 731k
data, 172k init)
Calibrating delay using timer specific routine.. 3190.45 BogoMIPS
(lpj=6380907)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Turion(tm) 64 Mobile Technology MT-30 stepping 02
Using local APIC timer interrupts.
Detected 12.436 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
GSI 21 sharing vector 0xA9 and IRQ 21
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC] (gpe 6)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fbe00000-fbefffff
PREFETCH window: f4000000-faffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: 30000000-31ffffff
MEM window: 36000000-37ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
IO window: 0000ec00-0000ecff
IO window: 00001000-000010ff
PREFETCH window: 32000000-33ffffff
MEM window: 38000000-39ffffff
PCI: Bridge: 0000:00:14.4
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: 30000000-34ffffff
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 16
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 17
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (47 C)
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 16, io mem 0xfbdff000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
POP2 RTL AC97 MC97
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 172k freed
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbdfd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
APIC error on CPU0: 00(40)
irq 16: nobody cared (try booting with the "irqpoll" option)
Call Trace: <IRQ> <ffffffff80144240>{__report_bad_irq+48}
<ffffffff80144436>{note_interrupt+425}
<ffffffff802302f3>{usb_hcd_irq+41} <ffffffff80143e83>{__do_IRQ+139}
<ffffffff80110bcc>{do_IRQ+48} <ffffffff8010ea60>{ret_from_intr+0}
<EOI> <ffffffff801d669f>{acpi_hw_register_read+196}
<ffffffff801ea7ae>{acpi_processor_idle+432}
<ffffffff8010d143>{cpu_idle+63}
<ffffffff803ba751>{start_kernel+447} <ffffffff803ba247>{_sinittext+583}
handlers:
[<ffffffff802302ca>] (usb_hcd_irq+0x0/0x56)
[<ffffffff802302ca>] (usb_hcd_irq+0x0/0x56)
Disabling IRQ #16
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 16, io mem 0xfbdfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ATIIXP: IDE controller at PCI slot 0000:00:14.1
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input1
hda: TOSHIBA MK8025GAS, ATA DISK drive
logips2pp: Detected unknown logitech mouse model 99
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
logips2pp: Detected unknown logitech mouse model 99
input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <[email protected]>
ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fbfff000-fbfff7ff]
Max Packet=[2048]
sbp2: $Rev: 1306 $ Ben Collins <[email protected]>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
JFS: nTxBlock = 3719, nTxLock = 29754
NTFS driver 2.1.25 [Flags: R/O MODULE].
SGI XFS with large block/inode numbers, no debug enabled
Registering unionfs 1.1.1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a82438]
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 19
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:14.6 disabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 19
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xe800, 00:0c:76:f8:ac:a7, IRQ 20
eth0: Identified 8139 chip type 'RTL-8101'
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:02:04.0 [1462:0131]
Yenta: ISA IRQ mask 0x04b8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:02:04.1 [1462:0131]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[email protected]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 22
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
usb 3-1: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the
wrong IRQ.
CPU0
0: 36321 IO-APIC-edge timer
1: 217 IO-APIC-edge i8042
8: 0 IO-APIC-edge rtc
12: 217 IO-APIC-edge i8042
14: 1474 IO-APIC-edge ide0
15: 11 IO-APIC-edge ide1
16: 188264 IO-APIC-level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3,
yenta
17: 0 IO-APIC-level yenta
19: 2 IO-APIC-level ATI IXP, ATI IXP Modem
21: 7 IO-APIC-level acpi, ohci1394
22: 6135 IO-APIC-level ipw2200
NMI: 39
LOC: 18137
ERR: 1
MIS: 0
Bootdata ok (command line is root=/dev/hda3 ro noapic)
Linux version 2.6.15-dist (root@localhost) (gcc version 4.0.2) #1 Sun Jan 15
16:04:52 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001df40000 (usable)
BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data)
BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS)
BIOS-e820: 000000001e000000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 MSI ) @ 0x00000000000f8340
ACPI: RSDT (v001 MSI 1013 0x06272005 MSFT 0x00000097) @
0x000000001df40000
ACPI: FADT (v002 MSI 1013 0x06272005 MSFT 0x00000097) @
0x000000001df40200
ACPI: MADT (v001 MSI OEMAPIC 0x06272005 MSFT 0x00000097) @
0x000000001df40300
ACPI: WDRT (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @
0x000000001df40360
ACPI: MCFG (v001 MSI OEMMCFG 0x06272005 MSFT 0x00000097) @
0x000000001df403b0
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @
0x000000001df43560
ACPI: OEMB (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @
0x000000001df50040
ACPI: DSDT (v001 MSI 1013 0x06272005 INTL 0x02002026) @
0x0000000000000000
No mptable found.
On node 0 totalpages: 120168
DMA zone: 3197 pages, LIFO batch:0
DMA32 zone: 116971 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Checking aperture...
CPU 0: aperture @ e062000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro noapic
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 1591.893 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 475600k/490752k available (1709k kernel code, 14464k reserved, 731k
data, 172k init)
Calibrating delay using timer specific routine.. 3190.40 BogoMIPS
(lpj=6380813)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Turion(tm) 64 Mobile Technology MT-30 stepping 02
ACPI: setting ELCR to 0200 (from 0ce0)
Using local APIC timer interrupts.
Detected 12.436 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC] (gpe 6)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fbe00000-fbefffff
PREFETCH window: f4000000-faffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: 30000000-31ffffff
MEM window: 36000000-37ffffff
PCI: Bus 7, cardbus bridge: 0000:02:04.1
IO window: 0000ec00-0000ecff
IO window: 00001000-000010ff
PREFETCH window: 32000000-33ffffff
MEM window: 38000000-39ffffff
PCI: Bridge: 0000:00:14.4
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: 30000000-34ffffff
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKE] -> GSI 6 (level, low) ->
IRQ 6
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (48 C)
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xfbdff000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
spurious 8259A interrupt: IRQ7.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
POP2 RTL AC97 MC97
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 172k freed
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xfbdfd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xfbdfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
input: AT Translated Set 2 keyboard as /class/input/input1
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usb 3-1: new low speed USB device using ohci_hcd and address 2
logips2pp: Detected unknown logitech mouse model 99
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
hda: TOSHIBA MK8025GAS, ATA DISK drive
input: Logitech USB Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1
logips2pp: Detected unknown logitech mouse model 99
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
irq 11: nobody cared (try booting with the "irqpoll" option)
Call Trace: <IRQ> <ffffffff80144240>{__report_bad_irq+48}
<ffffffff80144436>{note_interrupt+425}
<ffffffff802302f3>{usb_hcd_irq+41} <ffffffff80143e83>{__do_IRQ+139}
<ffffffff80110bcc>{do_IRQ+48} <ffffffff8010ea60>{ret_from_intr+0}
<EOI> <ffffffff801ea7ae>{acpi_processor_idle+432}
<ffffffff8010d143>{cpu_idle+63}
<ffffffff803ba751>{start_kernel+447} <ffffffff803ba247>{_sinittext+583}
handlers:
[<ffffffff802302ca>] (usb_hcd_irq+0x0/0x56)
[<ffffffff802302ca>] (usb_hcd_irq+0x0/0x56)
[<ffffffff802302ca>] (usb_hcd_irq+0x0/0x56)
Disabling IRQ #11
hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <[email protected]>
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKF] -> GSI 7 (level, low) ->
IRQ 7
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7] MMIO=[fbfff000-fbfff7ff]
Max Packet=[2048]
sbp2: $Rev: 1306 $ Ben Collins <[email protected]>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
JFS: nTxBlock = 3719, nTxLock = 29754
NTFS driver 2.1.25 [Flags: R/O MODULE].
SGI XFS with large block/inode numbers, no debug enabled
Registering unionfs 1.1.1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a82438]
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: replayed 12 transactions in 0 seconds
ReiserFS: hda4: Using r5 hash to sort names
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ACPI: PCI interrupt for device 0000:00:14.6 disabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) ->
IRQ 5
eth0: RealTek RTL8139 at 0xe800, 00:0c:76:f8:ac:a7, IRQ 5
eth0: Identified 8139 chip type 'RTL-8101'
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
Yenta: CardBus bridge found at 0000:02:04.0 [1462:0131]
Yenta: ISA IRQ mask 0x0018, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKE] -> GSI 6 (level, low) ->
IRQ 6
Yenta: CardBus bridge found at 0000:02:04.1 [1462:0131]
Yenta: ISA IRQ mask 0x0018, PCI irq 6
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[email protected]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKG] -> GSI 5 (level, low) ->
IRQ 5
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing
1 bytes away.
usb 3-1: USB disconnect, address 2
ohci_hcd 0000:00:13.1: IRQ INTR_SF lossage
hotplug++[1446]: segfault at 00002aaa2aabe110 rip 000000000040d6e9 rsp
00007fffffa97e70 error 4
usb 3-1: new low speed USB device using ohci_hcd and address 3
ACPI: PCI interrupt for device 0000:02:04.1 disabled
ACPI: PCI interrupt for device 0000:02:04.0 disabled
CPU0
0: 41758 XT-PIC timer
1: 754 XT-PIC i8042
2: 0 XT-PIC cascade
5: 7283 XT-PIC ipw2200
7: 7271 XT-PIC ohci1394
8: 0 XT-PIC rtc
9: 5 XT-PIC acpi
10: 2 XT-PIC ATI IXP, ATI IXP Modem
11: 100000 XT-PIC ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
12: 349 XT-PIC i8042
14: 1762 XT-PIC ide0
15: 11 XT-PIC ide1
NMI: 31
LOC: 41735
ERR: 36
MIS: 0
--
René Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
http://www.exactcode.de | http://www.t2-project.org
+49 (0)30 255 897 45
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
