Re: e100 in 2.6.15 fails unless irqpoll ist used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nils Rennebarth <[email protected]> wrote:
>
> An upgrade from 2.6.14.3 to 2.6.15 on my testmachine disabled my network cards: 
>  no packets are sent or received.
> 
>  There is the following in dmesg:
> 
>  usbcore: registered new driver usbfs
>  usbcore: registered new driver hub
>  USB Universal Host Controller Interface driver v2.3
>  irq 11: nobody cared (try booting with the "irqpoll" option)
>    [<c012ae21>] __report_bad_irq+0x31/0x77
>    [<c012aef4>] note_interrupt+0x75/0x99
>    [<c012a9f0>] __do_IRQ+0x65/0x91
>  ...
> 
>  Rebooting with irqpoll will make the network cards work. The above message will 
>  appeare nonetheless.

This means that your IRQ routing broke and the card's interrupt requests
are not getting through.

This is likely to be an ACPI regression.  Please raise a report at
bugzilla.kernel.org, generate full `dmesg -s 1000000' output for both
2.6.14.3 and for 2.6.15 and attach them to the report, thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux