From: Randy Dunlap <[email protected]>
arch: Use <linux/capability.h> where capable() is used.
Signed-off-by: Randy Dunlap <[email protected]>
---
arch/alpha/kernel/pci-noop.c | 1 +
arch/arm/common/rtctime.c | 1 +
arch/arm/kernel/apm.c | 1 +
arch/cris/arch-v10/drivers/ds1302.c | 1 +
arch/cris/arch-v10/drivers/pcf8563.c | 1 +
arch/i386/kernel/apm.c | 1 +
arch/i386/kernel/cpu/mtrr/if.c | 1 +
arch/i386/kernel/ioport.c | 1 +
arch/i386/kernel/microcode.c | 1 +
arch/i386/kernel/vm86.c | 1 +
arch/ia64/hp/sim/simserial.c | 1 +
arch/ia64/ia32/sys_ia32.c | 1 +
arch/ia64/kernel/perfmon.c | 1 +
arch/ia64/kernel/salinfo.c | 1 +
arch/ia64/sn/kernel/tiocx.c | 1 +
arch/m68k/bvme6000/rtc.c | 1 +
arch/m68k/kernel/sys_m68k.c | 1 +
arch/m68k/mvme16x/rtc.c | 1 +
arch/mips/kernel/syscall.c | 1 +
arch/mips/kernel/sysirix.c | 1 +
arch/parisc/hpux/sys_hpux.c | 1 +
arch/parisc/kernel/perf.c | 1 +
arch/powerpc/kernel/rtas.c | 1 +
arch/ppc/4xx_io/serial_sicc.c | 1 +
arch/ppc/kernel/ppc_htab.c | 1 +
arch/s390/kernel/compat_linux.c | 1 +
arch/sparc/kernel/sys_sunos.c | 1 +
arch/sparc64/kernel/sys_sparc32.c | 1 +
arch/sparc64/kernel/sys_sunos32.c | 1 +
arch/sparc64/solaris/fs.c | 1 +
arch/x86_64/kernel/ioport.c | 1 +
arch/x86_64/kernel/mce.c | 1 +
32 files changed, 32 insertions(+)
--- linux-2615-g3.orig/arch/alpha/kernel/pci-noop.c
+++ linux-2615-g3/arch/alpha/kernel/pci-noop.c
@@ -7,6 +7,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/capability.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/sched.h>
--- linux-2615-g3.orig/arch/arm/common/rtctime.c
+++ linux-2615-g3/arch/arm/common/rtctime.c
@@ -17,6 +17,7 @@
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
#include <linux/spinlock.h>
+#include <linux/capability.h>
#include <linux/device.h>
#include <asm/rtc.h>
--- linux-2615-g3.orig/arch/arm/kernel/apm.c
+++ linux-2615-g3/arch/arm/kernel/apm.c
@@ -18,6 +18,7 @@
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
#include <linux/apm_bios.h>
+#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
--- linux-2615-g3.orig/arch/cris/arch-v10/drivers/ds1302.c
+++ linux-2615-g3/arch/cris/arch-v10/drivers/ds1302.c
@@ -148,6 +148,7 @@
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/bcd.h>
+#include <linux/capability.h>
#include <asm/uaccess.h>
#include <asm/system.h>
--- linux-2615-g3.orig/arch/cris/arch-v10/drivers/pcf8563.c
+++ linux-2615-g3/arch/cris/arch-v10/drivers/pcf8563.c
@@ -28,6 +28,7 @@
#include <linux/ioctl.h>
#include <linux/delay.h>
#include <linux/bcd.h>
+#include <linux/capability.h>
#include <asm/uaccess.h>
#include <asm/system.h>
--- linux-2615-g3.orig/arch/ia64/hp/sim/simserial.c
+++ linux-2615-g3/arch/ia64/hp/sim/simserial.c
@@ -26,6 +26,7 @@
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/capability.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/serial.h>
--- linux-2615-g3.orig/arch/ia64/ia32/sys_ia32.c
+++ linux-2615-g3/arch/ia64/ia32/sys_ia32.c
@@ -48,6 +48,7 @@
#include <linux/ptrace.h>
#include <linux/stat.h>
#include <linux/ipc.h>
+#include <linux/capability.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/mman.h>
--- linux-2615-g3.orig/arch/ia64/kernel/perfmon.c
+++ linux-2615-g3/arch/ia64/kernel/perfmon.c
@@ -38,6 +38,7 @@
#include <linux/pagemap.h>
#include <linux/mount.h>
#include <linux/bitops.h>
+#include <linux/capability.h>
#include <linux/rcupdate.h>
#include <asm/errno.h>
--- linux-2615-g3.orig/arch/ia64/kernel/salinfo.c
+++ linux-2615-g3/arch/ia64/kernel/salinfo.c
@@ -29,6 +29,7 @@
* Replace some NR_CPUS by cpus_online, for hotplug cpu.
*/
+#include <linux/capability.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
--- linux-2615-g3.orig/arch/ia64/sn/kernel/tiocx.c
+++ linux-2615-g3/arch/ia64/sn/kernel/tiocx.c
@@ -11,6 +11,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/proc_fs.h>
+#include <linux/capability.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <asm/system.h>
--- linux-2615-g3.orig/arch/m68k/bvme6000/rtc.c
+++ linux-2615-g3/arch/m68k/bvme6000/rtc.c
@@ -11,6 +11,7 @@
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/capability.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/poll.h>
--- linux-2615-g3.orig/arch/m68k/kernel/sys_m68k.c
+++ linux-2615-g3/arch/m68k/kernel/sys_m68k.c
@@ -6,6 +6,7 @@
* platform.
*/
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/mm.h>
--- linux-2615-g3.orig/arch/m68k/mvme16x/rtc.c
+++ linux-2615-g3/arch/m68k/mvme16x/rtc.c
@@ -11,6 +11,7 @@
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/capability.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/poll.h>
--- linux-2615-g3.orig/arch/mips/kernel/syscall.c
+++ linux-2615-g3/arch/mips/kernel/syscall.c
@@ -9,6 +9,7 @@
*/
#include <linux/config.h>
#include <linux/a.out.h>
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/mm.h>
--- linux-2615-g3.orig/arch/mips/kernel/sysirix.c
+++ linux-2615-g3/arch/mips/kernel/sysirix.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/binfmts.h>
+#include <linux/capability.h>
#include <linux/highuid.h>
#include <linux/pagemap.h>
#include <linux/mm.h>
--- linux-2615-g3.orig/arch/parisc/hpux/sys_hpux.c
+++ linux-2615-g3/arch/parisc/hpux/sys_hpux.c
@@ -22,6 +22,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/capability.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/namei.h>
--- linux-2615-g3.orig/arch/parisc/kernel/perf.c
+++ linux-2615-g3/arch/parisc/kernel/perf.c
@@ -42,6 +42,7 @@
* on every box.
*/
+#include <linux/capability.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
--- linux-2615-g3.orig/arch/powerpc/kernel/rtas.c
+++ linux-2615-g3/arch/powerpc/kernel/rtas.c
@@ -17,6 +17,7 @@
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/capability.h>
#include <linux/delay.h>
#include <asm/prom.h>
--- linux-2615-g3.orig/arch/i386/kernel/apm.c
+++ linux-2615-g3/arch/i386/kernel/apm.c
@@ -219,6 +219,7 @@
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
+#include <linux/capability.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/smp.h>
--- linux-2615-g3.orig/arch/i386/kernel/cpu/mtrr/if.c
+++ linux-2615-g3/arch/i386/kernel/cpu/mtrr/if.c
@@ -1,5 +1,6 @@
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/capability.h>
#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/seq_file.h>
--- linux-2615-g3.orig/arch/i386/kernel/ioport.c
+++ linux-2615-g3/arch/i386/kernel/ioport.c
@@ -7,6 +7,7 @@
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/ioport.h>
--- linux-2615-g3.orig/arch/i386/kernel/microcode.c
+++ linux-2615-g3/arch/i386/kernel/microcode.c
@@ -70,6 +70,7 @@
*/
//#define DEBUG /* pr_debug */
+#include <linux/capability.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
--- linux-2615-g3.orig/arch/i386/kernel/vm86.c
+++ linux-2615-g3/arch/i386/kernel/vm86.c
@@ -30,6 +30,7 @@
*
*/
+#include <linux/capability.h>
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
--- linux-2615-g3.orig/arch/ppc/4xx_io/serial_sicc.c
+++ linux-2615-g3/arch/ppc/4xx_io/serial_sicc.c
@@ -47,6 +47,7 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/capability.h>
#include <linux/circ_buf.h>
#include <linux/serial.h>
#include <linux/console.h>
--- linux-2615-g3.orig/arch/ppc/kernel/ppc_htab.c
+++ linux-2615-g3/arch/ppc/kernel/ppc_htab.c
@@ -16,6 +16,7 @@
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/sysctl.h>
+#include <linux/capability.h>
#include <linux/ctype.h>
#include <linux/threads.h>
#include <linux/smp_lock.h>
--- linux-2615-g3.orig/arch/s390/kernel/compat_linux.c
+++ linux-2615-g3/arch/s390/kernel/compat_linux.c
@@ -55,6 +55,7 @@
#include <linux/syscalls.h>
#include <linux/sysctl.h>
#include <linux/binfmts.h>
+#include <linux/capability.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ptrace.h>
--- linux-2615-g3.orig/arch/sparc/kernel/sys_sunos.c
+++ linux-2615-g3/arch/sparc/kernel/sys_sunos.c
@@ -30,6 +30,7 @@
#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
--- linux-2615-g3.orig/arch/sparc64/kernel/sys_sparc32.c
+++ linux-2615-g3/arch/sparc64/kernel/sys_sparc32.c
@@ -11,6 +11,7 @@
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/capability.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/file.h>
--- linux-2615-g3.orig/arch/sparc64/kernel/sys_sunos32.c
+++ linux-2615-g3/arch/sparc64/kernel/sys_sunos32.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
+#include <linux/capability.h>
#include <linux/compat.h>
#include <linux/mman.h>
#include <linux/mm.h>
--- linux-2615-g3.orig/arch/sparc64/solaris/fs.c
+++ linux-2615-g3/arch/sparc64/solaris/fs.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/capability.h>
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/mm.h>
--- linux-2615-g3.orig/arch/x86_64/kernel/ioport.c
+++ linux-2615-g3/arch/x86_64/kernel/ioport.c
@@ -7,6 +7,7 @@
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/ioport.h>
--- linux-2615-g3.orig/arch/x86_64/kernel/mce.c
+++ linux-2615-g3/arch/x86_64/kernel/mce.c
@@ -15,6 +15,7 @@
#include <linux/sysdev.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
+#include <linux/capability.h>
#include <linux/cpu.h>
#include <linux/percpu.h>
#include <linux/ctype.h>
---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
