Re: usblp suspend failure with 2.6.15-rc5

[Pavel Machek <pavel@suse.cz>]

Hi!

> > since I switched to 2.6.15-rc2-git6, my machine is not able to suspend
> > anymore if my USB printer is plugged in. The problem is reproducible.
> > 
> > usb 1-2: new full speed USB device using uhci_hcd and address 3
> > drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 
> > 0 proto 2 vid 0x04E8 pid 0x3242
> > usbcore: registered new driver usblp
> > drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> > PM: Preparing system for mem sleep
> > Stopping tasks: ==================================================|
> > usblp 1-2:1.0: no suspend?
> > Could not suspend device 1-2: error -16
> > Some devices failed to suspend
> > Restarting tasks... done
> > 
> > 
> > Earlier kernels (2.6.14.2 and before) worked just fine.
> > 
> > A first search suggests this problem was introduced between
> > 2.6.14 and 2.6.15-rc2-git6. Should I try to narrow it down further?
> 
> yes, that would be good.
> 
> In this case, it would also help if you'd open a bug at 
> bugzilla.kernel.org.

Well, usblp does not have any suspend method, and usb probably just
started checking... There's also CONFIG_USB_SUSPEND option you may
want to play with.
							Pavel
-- 
Thanks, Sharp!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/