Re: uart_match_port() question

[Bjorn Helgaas <bjorn.helgaas@hp.com>]

On Wednesday 07 December 2005 5:17 pm, Benjamin Herrenschmidt wrote:
> On Wed, 2005-12-07 at 16:36 -0700, Bjorn Helgaas wrote:
> > On Wednesday 07 December 2005 4:13 pm, Benjamin Herrenschmidt wrote:
> > > ...  Part of the problem here is for example PIO. There is no such
> > > thing as PIO on a PowerPC, it's purely a PCI abstraction, thus inX/outX
> > > will only work once the PCI host briges have been discovered and their
> > > IO space mapped (setup_arch() time, but I definitely want my early
> > > console earlier).
> > 
> > ia64 has a similar problem, but it's a bit easier because firmware
> > configures and tells us about the legacy (0-64K) I/O port space.
> > So we do have to look up the MMIO base where those I/O ports get
> > mapped, but that's basically the first thing in setup_arch().  We
> > don't do much before that, so it hasn't been worthwhile to make
> > the console work earlier.
> 
> Oh, that's what I do too, that is, I have a mecanism now to walk the
> firmware device-tree and get the MMIO, my problem was with matching that
> MMIO address with the PIO one that 8250 gets later on. It seems that you
> solved that problem so it looks like I really need to look more closely
> at what you are doing :)

Well, don't get your hopes up too much...  ia64 uses the same addresses
early and late, i.e., if 8250_pci discovers a PIO port, the early code
also uses a PIO address.  We never use an MMIO address early and a PIO
address later.

The PIO -> MMIO translation is hidden inside our inb/outb functions
(see __ia64_mk_io_addr()).  The firmware tells us where the legacy
0-64K I/O ports are mapped, so we can set up io_space[0].mmio_base
very early, without enumerating the PCI bridges.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/